<entrylang="ka"key="IDT_EXTRACT_DESTINATION">გთხოვთ, აირჩიოთ მისამართი, სადაც მოხდება ფაილების დეარქივაცია:</entry>
<entrylang="ka"key="IDT_INSTALL_DESTINATION">გთხოვთ, აირჩიოთ მისამართი, სადაც მოხდება პროგრამის ინსტალაცია. თუ ეს ფოლდერი არ არსებობს, იგი ავტომატურად შეიქმნება.</entry>
<entrylang="ka"key="IDT_COLLECTING_RANDOM_DATA_NOTE">მნიშვნელოვანია: ამოძრავეთ მაუსი რაც შეიძლება რთული ტრაექტორიით და დიდხანს. ეს აამაღლებს შიფრაციის გასაღებების კრიპტოგრაფიული დაცულობის დონეს. შემდეგ დააჭირეთ "შემდეგ"-ს გასაგრძელებლად.</entry>
<entrylang="ka"key="IDT_MULTI_BOOT">აირჩიეთ ეს ოფცია, თუ კომპიუტერზე ინსტალირებულია ორი ან მეტი ოპერაციული სისტემა.\n\nმაგ.:\n- Windows XP და Windows XP\n- Windows XP და Windows Vista\n- Windows და Mac OS X\n- Windows და Linux\n- Windows, Linux და Mac OS X</entry>
<entrylang="en"key="IDT_NON_SYS_DEVICE">Encrypts a non-system partition on any internal or external drive (e.g. a flash drive). Optionally, creates a hidden volume.</entry>
<entrylang="ka"key="IDT_PARTIAL_POOL_CONTENTS">პულის მიმდინარე შიგთავსი (ნაწილობრივი)</entry>
<entrylang="ka"key="IDT_SINGLE_BOOT">აირციეთ ეს ოფცია, თუ კომპიუტერზე ინსტალირებულია მხოლოდ ერთი ოპერაციული სისტემა (თუნდაც რამდენიმე მპომხმარებლით).</entry>
<entrylang="ka"key="IDT_SPEED">სიჩქარე </entry>
<entrylang="ka"key="IDT_STATUS">სტატუსი</entry>
<entrylang="ka"key="IDT_SYSENC_KEYS_GEN_INFO">გასაღებები, "მარილი", და სხვა მონაცემები წარმატების იქნა გენერირებული. თუ ახალი გასაღებების შექმნა გსურთ, დააჭირეთ "უკან" და "შემდეგ"-ს. სხვა შემთხვევაში გასაგრძელებლად დააჭირეთ "შემდეგ"-ს.</entry>
<entrylang="en"key="IDT_SYS_DEVICE">Encrypts the partition/drive where Windows is installed. Anyone who wants to gain access and use the system, read and write files, etc., will need to enter the correct password each time before Windows boots. Optionally, creates a hidden system.</entry>
<entrylang="en"key="IDT_SYS_PARTITION">Select this option to encrypt the partition where the currently running Windows operating system is installed.</entry>
<entrylang="en"key="IDT_VOLUME_LABEL">Volume Label in Windows:</entry>
<entrylang="en"key="IDC_DISABLE_BOOT_LOADER_OUTPUT">Do not &show any texts in the pre-boot authentication screen (except the below custom message)</entry>
<entrylang="en"key="IDC_ENABLE_HARDWARE_ENCRYPTION">Accelerate AES encryption/decryption by using the AES instructions of the processor (if available)</entry>
<entrylang="ka"key="IDT_ACTIVE_LANG_PACK">ინფორმაცია არჩეული ენის მოდულის შესახებ</entry>
<entrylang="ka"key="IDT_BOX_BENCHMARK_INFO">სისწრაფეზე გავლენას ახდენს ცპ-ს დატვირთვა და შენახვის მოწყობილობების მახასიათებლები.\n\nეს ტესტები სრულდება ოპერატიულ მეხსიერებაში.</entry>
<entrylang="ka"key="IDT_KEYFILE_GENERATOR_NOTE">მნიშვნელოვანია: ამოძრავეთ მაუსი რაც შეიძლება რთული ტრაექტორიით და დიდხანს. ეს აამაღლებს გასაღების ფაილის კრიპტოგრაფიული დაცულობის დონეს.</entry>
<entrylang="ka"key="IDT_KEYFILE_WARNING">!!!გასაღების ფაილის დაკარგვის ან პირველი 1024კბ დაზიანების შემდეგ, ტომების მიერთება შეუძლებელი იქნება!</entry>
<entrylang="ka"key="IDT_KEY_UNIT">ბიტი</entry>
<entrylang="en"key="IDT_NUMBER_KEYFILES">Number of keyfiles:</entry>
<entrylang="en"key="IDT_RANDOM_POOL_ENRICHMENT_NOTE">IMPORTANT: Move your mouse as randomly as possible within this window. The longer you move it, the better. This significantly increases security. When done, click 'Continue'.</entry>
<entrylang="ka"key="ACCESSMODEFAIL">ძველი ტომიდან "მხოლოდ კითხვა" ატრიბუტის მოხსნა არ ხერხდება. შეამოწმეთ, წვდომადია თუ არა ფაილი.</entry>
<entrylang="ka"key="ACCESS_DENIED">შეცდომა! წვდომა არ არის.\n\nგანაყოფს, რომელსაც მიმართავთ, სექტორის ზომა აქვს 0, ან ეს ჩამტვირთავი მოწყობილობაა.</entry>
<entrylang="ka"key="ADMIN_PRIVILEGES_DRIVER">VeraCrypt-ის დრაივერის ჩასატვირთად სისტემაში ადმინისტრატორის უფლებებით უნდა იყოთ შესული</entry>
<entrylang="ka"key="ADMIN_PRIVILEGES_WARN_DEVICES">განაყოფის/მოწყობილობის შიფრაციისათვის/ფორმატირებისათვის სისტემაში ადმინისტრატორის უფლებებით უნდა იყოთ შესული.\n\n ეს არ ეხება ტომებს ფაილის ბაზაზე.</entry>
<entrylang="en"key="ADMIN_PRIVILEGES_WARN_MANAGE_VOLUME">Unable to activate fast file creation: Administrator privileges required.\nPlease relaunch the program as an Administrator to enable this feature.\n\nWould you like to proceed without fast file creation?</entry>
<entrylang="ka"key="ADMIN_PRIVILEGES_WARN_HIDVOL">ფარული ტომის შექმნისათვის სისტემაში ადმინისტრატორის უფლებებით უნდა იყოთ შესული.\n\nგავაგრძელო?</entry>
<entrylang="ka"key="ADMIN_PRIVILEGES_WARN_NTFS">ტომის NTFS ფორმატირებისათვის სისტემაში ადმინისტრატორის უფლებებით უნდა იყოთ შესული.\n\nამის გარეშე ტომის ფორმატირება შესაძლებელია მხოლოდ როგორც FAT</entry>
<entrylang="ka"key="AES_HELP">FIPS-ის მიერ დამტკიცებული შიფრი (Rijndael, გამოქვეყნდა 1998წ), გამოიყენება სახელმწიფო უწყებებში ზესაიდუმლო ინფორმაციის დასაცავად. 256-ბიტი გასაღები, 128-ბიტი ბლოკი, 14 რაუნდი (AES-256). ქმედების რეჟიმი-XTS.</entry>
<entrylang="ka"key="ALREADY_MOUNTED">ტომი უკვე მიერთებულია.</entry>
<entrylang="ka"key="ERR_SELF_TESTS_FAILED">ყურადღება: შიფრაციის ან ჰეშირების ერთერთმა ალგორითმმა ავტომატური თვითტესტირება ვერ გაიარა.\n\nშესაძლებელია დაზიანებულია VeraCrypt-ის ინსტალაცია.</entry>
<entrylang="ka"key="ERR_NOT_ENOUGH_RANDOM_DATA">ყურადღება: შემთხვევითი რიცხვების გენერატორის პულში არასაკმარისი მონაცემებია შემთხვევითი ინფორმაციის გენერირებისათვის.\n\nგთხოვთ აღნიშნული შეცდომა აცნობოთ პროგრამის ავტორებს.</entry>
<entrylang="en"key="ERR_HARDWARE_ERROR">The drive is damaged (there is a physical defect on it) or a cable is damaged, or the memory is malfunctioning.\n\nPlease note that this is a problem with your hardware, not with VeraCrypt. Therefore, please do NOT report this as a bug/problem in VeraCrypt and please do NOT ask for help with this in the VeraCrypt Forums. Please contact your computer vendor's technical support team for assistance. Thank you.\n\nNote: If the error occurs repeatedly at the same place, it is very likely caused by a bad disk block, which should be possible to correct using third-party software (note that, in many cases, the 'chkdsk /r' command cannot correct it because it works only at the filesystem level; in some cases, the 'chkdsk' tool cannot even detect it).</entry>
<entrylang="en"key="DEVICE_NOT_READY_ERROR">If you are accessing a drive for removable media, please make sure that a medium is inserted in the drive. The drive/medium may also be damaged (there may be a physical defect on it) or a cable may be damaged/disconnected.</entry>
<entrylang="en"key="WHOLE_DRIVE_ENCRYPTION_PREVENTED_BY_DRIVERS">Your system appears to be using custom chipset drivers containing a bug that prevents encryption of the whole system drive.\n\nPlease try updating or uninstalling any custom (non-Microsoft) chipset drivers before proceeding. If it does not help, try encrypting the system partition only.</entry>
<entrylang="ka"key="CANNOT_CALC_SPACE">მოწყობილობასთან წვდომა არ არის. შეამოწმეთ, მითითებული მოწყობილობა არსებობს თუ არა და ხომ არ არის დაკავებული.</entry>
<entrylang="ka"key="CAPSLOCK_ON">ყურადღება! ჩართულია კლავიში Caps Lock. შესაძლოა ამან პაროლის არასწორი შეტანა გამოიწვიოს.</entry>
<entrylang="ka"key="HIDDEN_VOLUME_TYPE_HELP">შეიძლება ვინმემ გამოგძალოთ დაშიფრული ტომის პაროლი. არსებობს მრავალი სიტუაცია, როდესაც უარს ვერ იტყვით პაროლის გაცემაზე (მაგ. გამოძალვა). ე.წ. ფარული ტომების გამოყენება ასეთ სიტუაციებში საშუალებას მოგცემთ დაიცვათ თქვენი საიდუმლო ინფორმაცია.</entry>
<entrylang="ka"key="NORMAL_VOLUME_TYPE_HELP">აირჩიეთ ეს ოფცია, თუ გსურთ VeraCrypt-ის ჩვეულებრივი ტომის შექმნა.</entry>
<entrylang="en"key="HIDDEN_OS_PRECLUDES_SINGLE_KEY_WDE">Please note that if you wish an operating system to be installed in a hidden partition-hosted volume, then the entire system drive cannot be encrypted using a single key.</entry>
<entrylang="ka"key="CIPHER_HIDVOL_HOST_TITLE">გარე ტომის შიფრაცია</entry>
<entrylang="ka"key="CIPHER_HIDVOL_TITLE">ფარული ტომის შიფრაცია</entry>
<entrylang="ka"key="CLEAN_WINMRU_FAILED">ყურადღება: ბოლო არჩეული ტომის ან გასაღების ფაილის მისამართის წაშლის შეცდომა.</entry>
<entrylang="ka"key="COMPRESSION_NOT_SUPPORTED">შეცდომა: კონტეინერი შეკუმშულია ფაილური სისტემის დონეზე. VeraCrypt მხარ არ უჭერს კონტეინერის შეკუმშვას (დაშიფრული მონაცემების შეკუმშვა არაეფექტურია).\n\nგამორთეთ კონტეინერის კუმშვა, შემდეგი ინსტრუქციით: 1) კონტეინერზე მაუსის მარჯვენა ღილაკით დაწკაპეთ 2) აირჩიეთ მენიუ Properties.3) დიალოგურ ფანჯარაში Properties დააჭირეთ ღილაკს Advanced 4) დიალოგურ ფანჯარაში Advanced გამორთეთ ატრიბუტიი "Compress contents to save disk space" დააჭირეთ ღილაკს OK'. 5) დააჭირეთ ღილაკს OK დიალოგურ ფანჯარაში Properties.</entry>
<entrylang="ka"key="CREATE_FAILED">%s ტომის შექმნის შეცდომა</entry>
<entrylang="ka"key="DEVICE_FREE_BYTES">%s-ის ზომა - %.2f ბაიტი</entry>
<entrylang="ka"key="DEVICE_FREE_KB">%s-ის ზომა - %.2f კბ</entry>
<entrylang="ka"key="DEVICE_FREE_MB">%s-ის ზომა - %.2f მბ</entry>
<entrylang="en"key="DEVICE_FREE_GB">Size of %s is %.2f GB</entry>
<entrylang="en"key="DEVICE_FREE_TB">Size of %s is %.2f TB</entry>
<entrylang="en"key="DEVICE_FREE_PB">Size of %s is %.2f PB</entry>
<entrylang="ka"key="DEVICE_IN_USE_FORMAT">ყურადღება: მოწყობილობა/განაყოფი გამოიყენება ოპერაციული სისტემის ან პროგრამის მიერ. ფორმატირებამ შეიძლება გამოიწვიოს მონაცემთა დაკარგვა ან სისტემის არასტაბილურობა.\n\nგსურთ გაგრძელება?</entry>
<entrylang="en"key="DEVICE_IN_USE_INPLACE_ENC">Warning: The partition is in use by the operating system or applications. You should close any applications that might be using the partition (including antivirus software).\n\nContinue?</entry>
<entrylang="ka"key="FORMAT_CANT_DISMOUNT_FILESYS">შეცდომა: მოწყობილობა/განაყოფი შეიცავს ფაილურ სისტემას, რომლის გამოერთებაც შეუძლებელია. ეს ფაილური სისტემა შესაძლოა გამოიყენება ოპერაციული სისტემის მიერ. მოწყობილობა/განაყოფის ფორმატირება გამოიწვევს მონაცემთა დაკარგვას და სისტემის არასტაბილურობას.\n\n პრობლემის გადასაჭრელად რეკომენდირებულია ამ განაყოფის გაუქმება, შემდეგ მისი კვლავ შექმნა ფორმატირების გარეშე. ინსტრუქცია: 1) მაუსის მარჯვენა ღილაკით დაწკაპეთ ხატულაზე "My computer" და აირჩიეთ მენიუ "Manage". 2) ფანჯარაში "Computer Management" აირჩიეთ "Storage"> "Disk Management". 3) მაუსის დაწკაპეთ იმ განაყოფზე, რომლის დაშიფრვაც გსურთ და აირჩიეთ ან "Delete Partition" ან "Delete volume" ან Delete logical volume". 4) დაწკაპეთ "Yes". 5) მაუსის მარჯვენა ღილაკით დაწკაპეთ დისკის ცარიელ ადგილზე (წარწერით "Unmounted") და აირჩიეთ "ძირითადი განაყოფი", "დამატებითი განაყოფი" ან "ლოგიკური დისკი". 6) გამოჩნდება განაყოფებისა და ტომების შექმნის ოსტატი, მიყევით მის ინსტრუქციებს. 7) დამხმარის გვერდზე სახელით "Formatting Partition" აირჩიეთ "Do not format partition" ან "Do not format volume". დაწკაპეთ "Next". 8) დაწკაპეთ "Finish". 9) VeraCrypt-ში ხელახლა სცადეთ ამ მოწყობილობის/განაყოფის დაშიფრვა.\n\nთუ VeraCrypt ისევ უარს იტყვის ამ მოწყობილობის/განაყოფის დაშიფრვაზე,მაშინ მოწყობილობის ბაზაზე კონტეინერის ნაცვლად შექმენით ფაილური კონტეინერი.</entry>
<entrylang="en"key="INPLACE_ENC_CANT_LOCK_OR_DISMOUNT_FILESYS">Error: The filesystem could not be locked and/or dismounted. It may be in use by the operating system or applications (for example, antivirus software). Encrypting the partition might cause data corruption and system instability.\n\nPlease close any applications that might be using the filesystem (including antivirus software) and try again. If it does not help, please follow the below steps.</entry>
<entrylang="ka"key="DEVICE_IN_USE_INFO">ყურადღება მიერთებული მოწყობილობები/განაყოფებიდან ზოგიერთი უკვე გამოიყენება.\n\nმის იგნორირებამ შეიძლება გამოიწვიოს არასასურველი შედეგები, სისტემის არასტაბილურობის ჩათვლით.\n\nრეკომენდებულია დახუროთ ყველა პროგრამა, რომელიც იყენებს ამ მოწყობილობას/განაყოფს.</entry>
<entrylang="ka"key="DEVICE_PARTITIONS_ERR">მითითებული მოწყობილობა შეიცავს განაყოფებს.\n\n მოწყობილობის ფორმატირებამ შეიძლება გამოიწვიოს სისტემის არასტაბილურობა ან/და მონაცემთა დაკარგვა. აირჩიეთ განაყოფი ამ მოწყობილობაზე ან წაშალეთ ყველა განაყოფი, რათა მისცეთ VeraCrypt-ს მოწყობილობის უსაფრთხო ფორმატირების საშუალება</entry>
<entrylang="en"key="DEVICE_PARTITIONS_ERR_W_INPLACE_ENC_NOTE">The selected non-system device contains partitions.\n\nEncrypted device-hosted VeraCrypt volumes can be created within devices that do not contain any partitions (including hard disks and solid-state drives). A device that contains partitions can be entirely encrypted in place (using a single master key) only if it is the drive where Windows is installed and from which it boots.\n\nIf you want to encrypt the selected non-system device using a single master key, you will need to remove all partitions on the device first to enable VeraCrypt to format it safely (formatting a device that contains partitions might cause system instability and/or data corruption). Alternatively, you can encrypt each partition on the drive individually (each partition will be encrypted using a different master key).\n\nNote: If you want to remove all partitions from a GPT disk, you may need to convert it to a MBR disk (using e.g. the Computer Management tool) in order to remove hidden partitions.</entry>
<entrylang="en"key="WHOLE_NONSYS_DEVICE_ENC_CONFIRM">Warning: If you encrypt the entire device (as opposed to encrypting only a partition on it), operating systems will consider the device as new, empty, and unformatted (as it will contain no partition table) and may spontaneously initialize the device (or ask you if you want to do so), which may damage the volume. Furthermore, it will not be possible to consistently mount the volume as favorite (e.g. when the drive number changes) or to assign a favorite-volume label to it.\n\nTo avoid that you may want to consider creating a partition on the device and encrypting the partition instead.\n\nAre you sure want to encrypt the entire device?</entry>
<entrylang="en"key="AFTER_FORMAT_DRIVE_LETTER_WARN">IMPORTANT: Please keep in mind that this volume can NOT be mounted/accessed using the drive letter %c:, which is currently assigned to it!\n\nTo mount this volume, click 'Auto-Mount Devices' in the main VeraCrypt window (alternatively, in the main VeraCrypt window, click 'Select Device', then select this partition/device, and click 'Mount'). The volume will be mounted to a different drive letter, which you select from the list in the main VeraCrypt window.\n\nThe original drive letter %c: should be used only in case you need to remove encryption from the partition/device (e.g., if you no longer need encryption). In such a case, right-click the drive letter %c: in the 'Computer' (or 'My Computer') list and select 'Format'. Otherwise, the drive letter %c: should never be used (unless you remove it, as described e.g. in the VeraCrypt FAQ, and assign it to another partition/device).</entry>
<entrylang="en"key="OS_NOT_SUPPORTED_FOR_NONSYS_INPLACE_ENC">In-place encryption of non-system volumes is not supported on the version of the operating system you are currently using (it is supported only on Windows Vista and later versions of Windows).\n\nThe reason is that this version of Windows does not support shrinking of a filesystem (the filesystem needs to be shrunk to make space for the volume header and backup header).</entry>
<entrylang="en"key="ONLY_NTFS_SUPPORTED_FOR_NONSYS_INPLACE_ENC">The selected partition does not appear to contain an NTFS filesystem. Only partitions that contain an NTFS filesystem can be encrypted in place.\n\nNote: The reason is that Windows does not support shrinking of other types of filesystems (the filesystem needs to be shrunk to make space for the volume header and backup header).</entry>
<entrylang="en"key="ONLY_MOUNTED_VOL_SUPPORTED_FOR_NONSYS_INPLACE_ENC">The selected partition does not appear to contain an NTFS filesystem. Only partitions that contain an NTFS filesystem can be encrypted in place.\n\nIf you want to create an encrypted VeraCrypt volume within this partition, choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place").</entry>
<entrylang="en"key="PARTITION_TOO_SMALL_FOR_NONSYS_INPLACE_ENC">Error: The partition is too small. VeraCrypt cannot encrypt it in place.</entry>
<entrylang="en"key="INPLACE_ENC_ALTERNATIVE_STEPS">To encrypt the data on this partition, please follow these steps:\n\n1) Create a VeraCrypt volume on an empty partition/device and then mount it.\n\n2) Copy all files from the partition that you originally wanted to encrypt to the mounted VeraCrypt volume (that has been created and mounted in step 1). That way, you will create a VeraCrypt-encrypted backup of the data.\n\n3) Create a VeraCrypt volume on the partition that you originally wanted to encrypt and make sure that (in the VeraCrypt wizard) you choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place"). Note that all data stored on the partition will be erased. After the volume is created, mount it.\n\n4) Copy all files from the mounted backup VeraCrypt volume (created and mounted in step 1) to the mounted VeraCrypt volume that has been created (and mounted) in step 3.\n\nAfter you complete these steps, the data will be encrypted and, in addition, there will be an encrypted backup of the data.</entry>
<entrylang="en"key="RAW_DEV_NOT_SUPPORTED_FOR_INPLACE_ENC">VeraCrypt can in-place encrypt only a partition, a dynamic volume, or an entire system drive.\n\nIf you want to create an encrypted VeraCrypt volume within the selected non-system device, choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place").</entry>
<entrylang="en"key="INPLACE_ENC_INVALID_PATH">Error: VeraCrypt can in-place encrypt only a partition, a dynamic volume, or an entire system drive. Please make sure the specified path is valid.</entry>
<entrylang="en"key="CANNOT_RESIZE_FILESYS">Error: Cannot shrink the filesystem (the filesystem needs to be shrunk to make space for the volume header and backup header).\n\nPossible causes and solutions:\n\n- Not enough free space on the volume. Please make sure no other application is writing to the filesystem.\n\n- Corrupted file system. Try to check it and fix any errors (right-click the corresponding drive letter in the 'Computer' list, then select Properties > Tools > 'Check Now', make sure the option 'Automatically fix file system errors' is enabled and click Start).\n\nIf the above steps do not help, please follow the below steps.</entry>
<entrylang="en"key="NOT_ENOUGH_FREE_FILESYS_SPACE_FOR_SHRINK">Error: There is not enough free space on the volume and so the filesystem cannot be shrunk (the filesystem needs to be shrunk to make space for the volume header and backup header).\n\nPlease delete any redundant files and empty the Recycle Bin so as to free at least 256 KB of space and then try again. Note that due to a Windows issue, the amount of free space reported by the Windows Explorer may be incorrect until the operating system is restarted. If restarting the system does not help, the file system may be corrupted. Try to check it and fix any errors (right-click the corresponding drive letter in the 'Computer' list, then select Properties > Tools > 'Check Now', make sure the option 'Automatically fix file system errors' is enabled and click Start).\n\nIf the above steps do not help, please follow the below steps.</entry>
<entrylang="en"key="DISK_FREE_KB">Free space on drive %s is %.2f KB</entry>
<entrylang="en"key="DISK_FREE_MB">Free space on drive %s is %.2f MB</entry>
<entrylang="en"key="DISK_FREE_GB">Free space on drive %s is %.2f GB</entry>
<entrylang="en"key="DISK_FREE_TB">Free space on drive %s is %.2f TB</entry>
<entrylang="en"key="DISK_FREE_PB">Free space on drive %s is %.2f PB</entry>
<entrylang="ka"key="DRIVELETTERS">დისკის თავისუფალი ასოების მიღება ვერ ხერხდება.</entry>
<entrylang="ka"key="DRIVER_NOT_FOUND">შეცდომა: VeraCrypt-ის დრაივერი ვერ მოიძებნა.\n\nგადაწერეთ ფაილები 'veracrypt.sys' და 'veracrypt-x64.sys' დირექტორიაში, სადაც VeraCrypt-ის პროგრამაა (VeraCrypt.exe) განთავსებული.</entry>
<entrylang="en"key="DRIVER_VERSION">Error: An incompatible version of the VeraCrypt driver is currently running.\n\nIf you are trying to run VeraCrypt in portable mode (i.e. without installing it) and a different version of VeraCrypt is already installed, you must uninstall it first (or upgrade it using the VeraCrypt installer). To uninstall it, follow these steps: On Windows Vista or later, select 'Start Menu' > Computer > 'Uninstall or change a program' > VeraCrypt > Uninstall; on Windows XP, select 'Start Menu' > Settings > 'Control Panel' > 'Add Or Remove Programs' > VeraCrypt > Remove.\n\nSimilarly, if you are trying to run VeraCrypt in portable mode (i.e. without installing it) and a different version of VeraCrypt is already running in portable mode, you must restart the system first and then run only this new version.</entry>
<entrylang="ka"key="ERR_CIPHER_INIT_WEAK_KEY">შეცდომა: სუსტი ან პოტენციურად სუსტი გასაღები! ეს გასაღები არ იქნა მიღებული. გაიმეორეთ.</entry>
<entrylang="en"key="EXCEPTION_REPORT">A critical error has occurred and VeraCrypt must be terminated. If this is caused by a bug in VeraCrypt, we would like to fix it. To help us, you can send us an automatically generated error report containing the following items:\n\n- Program version\n- Operating system version\n- Type of CPU\n- VeraCrypt component name\n- Checksum of VeraCrypt executable\n- Symbolic name of dialog window\n- Error category\n- Error address\n- VeraCrypt call stack\n\nIf you select 'Yes', the following URL (which contains the entire error report) will be opened in your default Internet browser.\n\n%hs\n\nDo you want to send us the above error report?</entry>
<entrylang="en"key="EXCEPTION_REPORT_EXT">A critical error has occurred in your system, which requires VeraCrypt to be terminated.\n\nNote that this error has not been caused by VeraCrypt (so the VeraCrypt developers cannot fix it). Please, check your system for possible problems (e.g., system configuration, network connection, failing hardware components).</entry>
<entrylang="en"key="EXCEPTION_REPORT_EXT_FILESEL">A critical error has occurred in your system, which requires VeraCrypt to be terminated.\n\nIf this problem persists, you may want to try disabling or uninstalling applications that could potentially be causing this issue, such as antivirus or Internet security software, system "enhancers", "optimizers" or "tweakers", etc. If it does not help, you may want to try reinstalling your operating system (this problem may also be caused by malware).</entry>
<entrylang="ka"key="EXCEPTION_REPORT_TITLE">VeraCrypt-ის კრიტიკული შეცდომა</entry>
<entrylang="en"key="SYSTEM_CRASHED_ASK_REPORT">VeraCrypt detected that the operating system recently crashed. There are many potential reasons why the system could have crashed (for example, a failing hardware component, a bug in a device driver, etc.)\n\nDo you want VeraCrypt to check whether a bug in VeraCrypt could have caused the system crash?</entry>
<entrylang="en"key="ASK_KEEP_DETECTING_SYSTEM_CRASH">Do you want VeraCrypt to continue detecting system crashes?</entry>
<entrylang="en"key="NO_MINIDUMP_FOUND">VeraCrypt found no system crash minidump file.</entry>
<entrylang="en"key="ASK_DELETE_KERNEL_CRASH_DUMP">Do you want to delete the Windows crash dump file to free up disk space?</entry>
<entrylang="en"key="ASK_DEBUGGER_INSTALL">In order to analyze the system crash, VeraCrypt needs to install Microsoft Debugging Tools for Windows first.\n\nAfter you click OK, the Windows installer will download the Microsoft Debugging Tools installation package (16 MB) from a Microsoft server and install it (the Windows installer will be forwarded to the Microsoft server URL from the veracrypt.org server, which ensures that this feature works even if Microsoft changes the location of the installation package).</entry>
<entrylang="en"key="SYSTEM_CRASH_ANALYSIS_INFO">After you click OK, VeraCrypt will analyze the system crash. This may take up to several minutes.</entry>
<entrylang="en"key="DEBUGGER_NOT_FOUND">Please make sure the environment variable 'PATH' includes the path to 'kd.exe' (Kernel Debugger).</entry>
<entrylang="en"key="SYSTEM_CRASH_NO_VERACRYPT">It appears that VeraCrypt most likely did not cause the system crash. There are many potential reasons why the system could have crashed (for example, a failing hardware component, a bug in a device driver, etc.)</entry>
<entrylang="en"key="SYSTEM_CRASH_UPDATE_DRIVER">Results of the analysis indicate that updating the following driver might solve this issue: </entry>
<entrylang="en"key="SYSTEM_CRASH_REPORT">To help us determine whether there is a bug in VeraCrypt, you can send us an automatically generated error report containing the following items:\n- Program version\n- Operating system version\n- Type of CPU\n- Error category\n- Driver name and version\n- System call stack\n\nIf you select 'Yes', the following URL (which contains the entire error report) will be opened in your default Internet browser.</entry>
<entrylang="en"key="ASK_SEND_ERROR_REPORT">Do you want to send us the above error report?</entry>
<entrylang="ka"key="EXT_PARTITION">შექმენით ლოგიკური დისკი ამ დამატებით განაყოფზე და გაიმეორეთ.</entry>
<entrylang="en"key="FILE_HELP">A VeraCrypt volume can reside in a file (called VeraCrypt container), which can reside on a hard disk, on a USB flash drive, etc. A VeraCrypt container is just like any normal file (it can be, for example, moved or deleted as any normal file). Click 'Select File' to choose a filename for the container and to select the location where you wish the container to be created.\n\nWARNING: If you select an existing file, VeraCrypt will NOT encrypt it; the file will be deleted and replaced with the newly created VeraCrypt container. You will be able to encrypt existing files (later on) by moving them to the VeraCrypt container that you are about to create now.</entry>
<entrylang="en"key="FILE_HELP_HIDDEN_HOST_VOL">Select the location of the outer volume to be created (within this volume the hidden volume will be created later on).\n\nA VeraCrypt volume can reside in a file (called VeraCrypt container), which can reside on a hard disk, on a USB flash drive, etc. A VeraCrypt container can be moved or deleted as any normal file. Click 'Select File' to choose a filename for the container and to select the location where you wish the container to be created. If you select an existing file, VeraCrypt will NOT encrypt it; it will be deleted and replaced with the newly created container. You will be able to encrypt existing files (later on) by moving them to the VeraCrypt container you are about to create now.</entry>
<entrylang="en"key="DEVICE_HELP">Encrypted device-hosted VeraCrypt volumes can be created within partitions on hard disks, solid-state drives, USB memory sticks, and on any other supported storage devices. Partitions can also be encrypted in place.\n\nIn addition, encrypted device-hosted VeraCrypt volumes can be created within devices that do not contain any partitions (including hard disks and solid-state drives).\n\nNote: A device that contains partitions can be entirely encrypted in place (using a single key) only if it is the drive where Windows is installed and from which it boots.</entry>
<entrylang="en"key="DEVICE_HELP_NO_INPLACE">A device-hosted VeraCrypt volume can be created within a hard disk partition, solid-state drive, USB memory stick, and other storage devices.\n\nWARNING: Note that the partition/device will be formatted and all data currently stored on it will be lost.</entry>
<entrylang="en"key="DEVICE_HELP_HIDDEN_HOST_VOL">\nSelect the location of the outer volume to be created (within this volume the hidden volume will be created later on).\n\nOuter volumes can be created within partitions on hard disks, solid-state drives, USB memory sticks, and on any other supported storage devices. Outer volumes can also be created within devices that do not contain any partitions (including hard disks and solid-state drives).\n\nWARNING: Note that the partition/device will be formatted and all data currently stored on it will be lost.</entry>
<entrylang="ka"key="FILE_HELP_HIDDEN_HOST_VOL_DIRECT">აირჩიეთ განლაგება VeraCrypt-ის ტომისათვის, რომელშიც მოთავსდება ფარული ტომი.</entry>
<entrylang="en"key="FILE_IN_USE">WARNING: The host file/device is already in use!\n\nIgnoring this can cause undesired results including system instability. All applications that might be using the host file/device (for example, antivirus or backup applications) should be closed before mounting the volume.\n\nContinue mounting?</entry>
<entrylang="ka"key="FILE_IN_USE_FAILED">შეცდომა! ტომის მიერთება შეუძლებელია. ფაილი/მოწყობილობა უკვე გამოიყენება. მონოპოლური წვდომის გარეშე მიერთების მცდელობა ასევე წარუმატებლად დასრულდა.</entry>
<entrylang="ka"key="FILE_OPEN_FAILED">ფაილის გახსნა შეუძლებელია.</entry>
<entrylang="en"key="FILESYS_PAGE_HELP_QUESTION">Do you intend to store files larger than 4 GB in this VeraCrypt volume?</entry>
<entrylang="en"key="FILESYS_PAGE_HELP_EXPLANATION">Depending on your choice above, VeraCrypt will choose a suitable default file system for the VeraCrypt volume (you will be able to select a file system in the next step).</entry>
<entrylang="en"key="FILESYS_PAGE_HELP_EXPLANATION_HIDVOL">As you are creating an outer volume, you should consider choosing 'No'. If you choose 'Yes', the default filesystem will be NTFS, which is not as suitable for outer volumes as FAT (for example, the maximum possible size of the hidden volume will be significantly greater if the outer volume is formatted as FAT). Normally, FAT is the default for both hidden and normal volumes (so FAT volumes are not suspicious). However, if the user indicates intent to store files larger than 4 GB (which the FAT file system does not allow), then FAT is not the default.</entry>
<entrylang="en"key="FILESYS_PAGE_HELP_EXPLANATION_HIDVOL_CONFIRM">Are you sure you want to choose 'Yes'?</entry>
<entrylang="en"key="DEVICE_TRANSFORM_MODE_PAGE_FORMAT_HELP">This is the fastest way to create a partition-hosted or device-hosted VeraCrypt volume (in-place encryption, which is the other option, is slower because content of each sector has to be first read, encrypted, and then written). Any data currently stored on the selected partition/device will be lost (the data will NOT be encrypted; it will be overwritten with random data). If you want to encrypt existing data on a partition, choose the other option.</entry>
<entrylang="en"key="DEVICE_TRANSFORM_MODE_PAGE_INPLACE_HELP">The entire selected partition and all data stored on it will be encrypted in place. If the partition is empty, you should choose the other option (the volume will be created much faster).</entry>
<entrylang="en"key="SHOW_MORE_INFORMATION">Show more information</entry>
<entrylang="en"key="DO_NOT_SHOW_THIS_AGAIN">Do not show this again</entry>
<entrylang="en"key="WIPE_FINISHED">The content of the partition/device has been successfully erased.</entry>
<entrylang="en"key="WIPE_FINISHED_DECOY_SYSTEM_PARTITION">The content of the partition where the original system (of which the hidden system is a clone) resided has been successfully erased.</entry>
<entrylang="en"key="DECOY_OS_VERSION_WARNING">Please make sure the version of Windows you are going to install (on the wiped partition) is the same as the version of Windows you are currently running. This is required due to the fact that both systems will share a common boot partition.</entry>
<entrylang="en"key="SYSTEM_ENCRYPTION_FINISHED">The system partition/drive has been successfully encrypted.\n\nNote: If there are non-system VeraCrypt volumes that you need to have mounted automatically every time Windows starts, you can set it up by mounting each of them and selecting 'Favorites' > 'Add Mounted Volume to System Favorites').</entry>
<entrylang="ka"key="SYSTEM_DECRYPTION_FINISHED">სისტემური განაყოფის/მოწყობილობის დეშიფრაცია წარმატებით დასრულდა..</entry>
<entrylang="ka"key="FORMAT_FINISHED_HELP">\n\nVeraCrypt-ის ტომი შექმნილია და გამოყენებისათვის მზადაა. თუ გსურთ სხვა ტომის შექმნა, დააჭირეთ ღილაკს "შემდეგ".</entry>
<entrylang="en"key="SYSENC_HIDDEN_VOL_FORMAT_FINISHED_HELP">\n\nThe hidden VeraCrypt volume has been successfully created (the hidden operating system will reside within this hidden volume).\n\nClick Next to continue.</entry>
<entrylang="en"key="NONSYS_INPLACE_ENC_FINISHED_INFO">IMPORTANT: TO MOUNT THIS NEWLY CREATED VERACRYPT VOLUME AND TO ACCESS DATA STORED IN IT, CLICK 'Auto-Mount Devices' IN THE MAIN VERACRYPT WINDOW. After you enter the correct password (and/or supply correct keyfiles), the volume will be mounted to the drive letter you select from the list in the main VeraCrypt window (and you will be able to access the encrypted data via the selected drive letter).\n\nPLEASE REMEMBER OR WRITE DOWN THE ABOVE STEPS. YOU MUST FOLLOW THEM WHENEVER YOU WANT TO MOUNT THE VOLUME AND ACCESS DATA STORED IN IT. Alternatively, in the main VeraCrypt window, click 'Select Device', then select this partition/volume, and click 'Mount'.\n\nThe partition/volume has been successfully encrypted (it contains a fully encrypted VeraCrypt volume now) and is ready for use.</entry>
<entrylang="en"key="NONSYS_INPLACE_DEC_FINISHED_INFO">The VeraCrypt volume has been successfully decrypted.</entry>
<entrylang="en"key="NONSYS_INPLACE_DEC_FINISHED_DRIVE_LETTER_SEL_INFO">The VeraCrypt volume has been successfully decrypted.\n\nPlease select a drive letter that you wish to assign to the decrypted volume and then click Finish.\n\nIMPORTANT: Until a drive letter is assigned to the decrypted volume, you will not be able to access data stored on the volume.</entry>
<entrylang="en"key="NONSYS_INPLACE_DEC_FINISHED_NO_DRIVE_LETTER_AVAILABLE">Warning: To be able to access the decrypted data, a drive letter needs to be assigned to the decrypted volume. However, no drive letter is currently available.\n\nPlease vacate a drive letter (for example, by disconnecting a USB flash drive or external hard drive, etc.) and then click OK.</entry>
<entrylang="ka"key="FORMAT_FINISHED_INFO">VeraCrypt-ს ტომი წარმატებით შეიქმნა.</entry>
<entrylang="ka"key="FORMAT_HELP">მნიშვნელოვანია: ამოძრავეთ მაუსი რაც შეიძლება რთული ტრაექტორიით და დიდხანს. ეს აამაღლებს გასაღების კრიპტოგრაფიული დაცულობის დონეს. შემდეგ დაწკაპეთ "ფორმატირება" ახალი ტომის შესაქმნელად.</entry>
<entrylang="ka"key="FORMAT_HIDVOL_HOST_HELP">დაწკაპეთ "ფორმატირება" გარე ტომის შესაქმნელად. დამატებით ინფორმაციისათვის მიმართეთ დოკუმენტაციას.</entry>
<entrylang="ka"key="FORMAT_HIDVOL_HOST_TITLE">გარე ტომის ფორმატირება</entry>
<entrylang="ka"key="FORMAT_HIDVOL_TITLE">ფარული ტომის ფორმატირება</entry>
<entrylang="ka"key="HELP_READER_ERROR">მომხმარებლის სახელმძღვანელოს წასაკითხად/დასაბეჭდად საჭიროა პროგრამა Adobe Reader (ან თავსებადი). Adobe Reader შეიძლება ჩამოტვირთულ იქნას (უფასოდ) საიტიდან www.adobe.com\n\nგსურთ ამის ნაცვლად Online-დოკუმენტაცია იხილოთ?</entry>
<entrylang="ka"key="HIDDEN_VOL_WIZARD_MODE_NORMAL_HELP">თუ აირჩევთ ამ ოფციას, ოსტატი დაგეხმარებათ ჯერ ჩვეულებრივი ტომის შექმნაში, ხოლო შემდგომ ფარული ტომის შექმნაში მის შიგნით. გამოუცდელი მომხმარებლებისათვის რეკომენდებულია ამ ოფციის გამოყენება.</entry>
<entrylang="ka"key="HIDDEN_VOL_WIZARD_MODE_DIRECT_HELP">თუ აირჩევთ ამ ოფციას, შეიქმნება ფარული ტომი ჩვეულებრივი ტომის შიგნით. იგულისხმება, რომ ეს ჩვეულებრივი ტომი უკვე შექმნილია.</entry>
<entrylang="ka"key="HIDDEN_VOL_WIZARD_MODE_TITLE">ტომის შექმნის რეჟიმი</entry>
<entrylang="ka"key="HIDVOL_FORMAT_FINISHED_TITLE">ფარული ტომი შექმნილია</entry>
<entrylang="en"key="HIDVOL_FORMAT_FINISHED_HELP">The hidden VeraCrypt volume has been successfully created and is ready for use. If all the instructions have been followed and if the precautions and requirements listed in the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the VeraCrypt User's Guide are followed, it should be impossible to prove that the hidden volume exists, even when the outer volume is mounted.\n\nWARNING: IF YOU DO NOT PROTECT THE HIDDEN VOLUME (FOR INFORMATION ON HOW TO DO SO, REFER TO THE SECTION "PROTECTION OF HIDDEN VOLUMES AGAINST DAMAGE" IN THE VERACRYPT USER'S GUIDE), DO NOT WRITE TO THE OUTER VOLUME. OTHERWISE, YOU MAY OVERWRITE AND DAMAGE THE HIDDEN VOLUME!</entry>
<entrylang="en"key="FIRST_HIDDEN_OS_BOOT_INFO">You have started the hidden operating system. As you may have noticed, the hidden operating system appears to be installed on the same partition as the original operating system. However, in reality, it is installed within the partition behind it (in the hidden volume). All read and write operations are being transparently redirected from the original system partition to the hidden volume.\n\nNeither the operating system nor applications will know that data written to and read from the system partition are actually written to and read from the partition behind it (from/to a hidden volume). Any such data is encrypted and decrypted on the fly as usual (with an encryption key different from the one that will be used for the decoy operating system).\n\n\nPlease click Next to continue.</entry>
<entrylang="en"key="HIDVOL_HOST_FILLING_HELP_SYSENC">The outer volume has been created and mounted as drive %hc:. To this outer volume you should now copy some sensitive-looking files that you actually do NOT want to hide. They will be there for anyone forcing you to disclose the password for the first partition behind the system partition, where both the outer volume and the hidden volume (containing the hidden operating system) will reside. You will be able to reveal the password for this outer volume, and the existence of the hidden volume (and of the hidden operating system) will remain secret.\n\nIMPORTANT: The files you copy to the outer volume should not occupy more than %s. Otherwise, there may not be enough free space on the outer volume for the hidden volume (and you will not be able to continue). After you finish copying, click Next (do not dismount the volume).</entry>
<entrylang="ka"key="HIDVOL_HOST_FILLING_HELP">გარე ტომი შექმნილია და მიერთებულია, როგორც დისკი %hc:. ამ ტომში საჭიროა გადმოიწეროს რაიმე ფაილები, რომლებიც არ შეიცავენ თქვენთვის მნიშვნელოვან რაიმე ინფორმაციას, რათა შეცდომაში შეიყვანოთ უცხო პირი, თუკი ის გარე ტომის პაროლს გამოგძალავთ. ამ შემთხვევაში თქვენ მას გადასცემთ მხოლოდ გარე, და არა ფარული ტომის, პაროლს. ფაილები, თქვენთვის ნამდვილად ღირებული ინფორმაციით, შეინახება ფარულ ტომზე. როდესაც მორჩებით ფაილების გადმოწერას,დააჭირეთ "შემდეგ"-ს'. არ გამოაერთოთ ეს ტომი. შენიშვნა: "შემდეგ"-ზე დაჭერა გაუშვებს გარე ტომის კლასტერების რუკის სკანირების პროცესს, უწყვეტი თავისუფალი სივრცის გამოსავლენად, რომლის დაბოლოება ახალი ტომის დაბოლოება გახდება. ეს მონაკვეთი გამოყენებულ იქნება ფარული ტომის განსათავსებლად, ანუ მისი ზომით განისაზღვრება ფარული ტომის მაქსიმალური მოცულობა. კლასტერების რუკის სკანირება იმის გარანტია, რომ გარე ტომის მონაცემები არ დაზიანდება ფარული ტომში მომხდარი ჩანაწერების შედეგად.</entry>
<entrylang="ka"key="HIDVOL_HOST_FILLING_TITLE">გარე ტომის მონაცემები</entry>
<entrylang="ka"key="HIDVOL_HOST_PRE_CIPHER_HELP">\n\nშემდგომ ეტაპებზე მიუთითეთ გარე ტომის პარამეტრები</entry>
<entrylang="en"key="HIDVOL_HOST_PRE_CIPHER_HELP_SYSENC">\n\nIn the next steps, you will create a so-called outer VeraCrypt volume within the first partition behind the system partition (as was explained in one of the previous steps).</entry>
<entrylang="en"key="HIDDEN_OS_PRE_CIPHER_HELP">In the following steps, you will set the options and password for the hidden volume, which will contain the hidden operating system.\n\nRemark: The cluster bitmap of the outer volume has been scanned in order to determine the size of uninterrupted area of free space whose end is aligned with the end of the outer volume. This area will accommodate the hidden volume, so it limits its maximum possible size. The maximum possible size of the hidden volume has been determined and confirmed to be greater than the size of the system partition (which is required, because the entire content of the system partition will need to be copied to the hidden volume). This ensures that no data currently stored on the outer volume will be overwritten by data written to the area of the hidden volume.</entry>
<entrylang="en"key="HIDDEN_OS_PRE_CIPHER_WARNING">IMPORTANT: Please remember the algorithms that you select in this step. You will have to select the same algorithms for the decoy system. Otherwise, the hidden system will be inaccessible! (The decoy system must be encrypted with the same encryption algorithm as the hidden system.)\n\nNote: The reason is that the decoy system and the hidden system will share a single boot loader, which supports only a single algorithm, selected by the user (for each algorithm, there is a special version of the VeraCrypt Boot Loader).</entry>
<entrylang="ka"key="HIDVOL_PRE_CIPHER_HELP">\n\nტომის კლასტერების რუკა გავლილია, ფარული ტომის მაქსიმალური ზომა განისაზღვრა. შემდგომ ეტაპებზე აირჩიეთ ფარული ტომის პარამეტრები, ზომა და პაროლი.</entry>
<entrylang="ka"key="HIDVOL_PROT_WARN_AFTER_MOUNT">ფარული ტომი დაცული იქნება მანამ, ვიდრე გარე ტომი მიერთებულია.\n\nყურადღება: თუ ფარული ტომის არეალში მონაცემთა ჩაწერის მცდელობა იქნება, ჩაირთვება მთელი ტომის (გარე და ფარული) დაცვა ჩაწერისგან, ვიდრე ტომები არ იქნება გამოერთებული. ამან შესაძლოა გარე ტომზე ფაილური სისტემის დაზიანება გამოიწვიოს, რის გამოც (გამეორების შემთხვევაში) ფარული ტომის არსებობის უარყოფა ნაკლებ დამაჯერებელი იქნება. ამიტომ ყველა ღონე უნდა იხმაროთ, რათა ფარული ტომის არეალში ჩაწერა თავიდან აიცილოთ. ნებისმიერი ჩასაწერი ინფორმაცია, რომლის ამ არეალში ჩაწერის მცდელობაც იქნება, დაიკარგება. Windows-მა შესაძლოა ამ დროს გამოიტანოს შეცდომის შეტყობინება ("Delayed Write Failed" ან "The parameter is incorrect").</entry>
<entrylang="ka"key="HIDVOL_PROT_WARN_AFTER_MOUNT_PLURAL">ყოველი ფარული ტომი ახლად მიერთებულ გარე ტომებში დაცული იქნება დაზიანებისგან.\n\nთუ ფარული ტომის არეალში მონაცემთა ჩაწერის მცდელობა იქნება, ჩაირთვება მთელი ტომის (გარე და ფარული) დაცვა ჩაწერისგან, ვიდრე ტომები არ იქნება გამოერთებული. ამან შესაძლოა გარე ტომზე ფაილური სისტემის დაზიანება გამოიწვიოს, რის გამოც (გამეორების შემთხვევაში) ფარული ტომის არსებობის უარყოფა ნაკლებ დამაჯერებელი იქნება. ამიტომ ყველა ღონე უნდა იხმაროთ, რათა ფარული ტომის არეალში ჩაწერა თავიდან აიცილოთ. ნებისმიერი ჩასაწერი ინფორმაცია, რომლის ამ არეალში ჩაწერის მცდელობაც იქნება, დაიკარგება. Windows-მა შესაძლოა ამ დროს გამოიტანოს შეცდომის შეტყობინება ("Delayed Write Failed" ან "The parameter is incorrect").</entry>
<entrylang="ka"key="DAMAGE_TO_HIDDEN_VOLUME_PREVENTED">გაფრთხილება: იყო ფარული ტომის არეალში მონაცემების ჩაწერის მცდელობა დისკზე, რომელიც მიერთებულია, როგორც %c:! VeraCrypt-მა დაბლოკა ეს მონაცემები ჩაწერისგან, რათა დაეცვა ფარული ტომი დაზიანებისგან. ამან შესაძლოა გარე ტომის ფაილური სისტემის დაზიანება გამოიწვია, Windows-მა შესაძლოა გამოიტანოს შეცდომის შეტყობინება ("Delayed Write Failed" ან "The parameter is incorrect"). მთლიანი ტომი (გარე და ფარული) მათ გამოერთებამდე დაცული იქნება ჩაწერისგან. თუ ეს ჩაწერისაგან დაცვის პირველი შემთხვევა არ არის, ფარული ტომის არსებობის უარყოფა ნაკლებ დამაჯერებელი იქნება (გარე ფაილურ სისტემაში კორელაციური დარღვევების გამო). ამიტომ უმჯობესი იქნება შექმნათ ახალი VeraCrypt ტომი (სწრაფი ფორმატირების გარეშე) და არსებული ფაილები გადაიტანოთ ახალ ტომში; ძველი ტომი დაცულად უნდა წაიშალოს (გარე და ფარული ტომები). რეკომენდებულია ახლავე გადატვირთოთ ოპერაციული სისტემა.</entry>
<entrylang="en"key="CANNOT_SATISFY_OVER_4G_FILE_SIZE_REQ">You have indicated intent to store files larger than 4 GB on the volume. This requires the volume to be formatted as NTFS, which, however, will not be possible.</entry>
<entrylang="en"key="CANNOT_CREATE_NON_HIDDEN_NTFS_VOLUMES_UNDER_HIDDEN_OS">Please note that when a hidden operating system is running, non-hidden VeraCrypt volumes cannot be formatted as NTFS. The reason is that the volume would need to be temporarily mounted without write protection in order to allow the operating system to format it as NTFS (whereas formatting as FAT is performed by VeraCrypt, not by the operating system, and without mounting the volume). For further technical details, see below. You can create a non-hidden NTFS volume from within the decoy operating system.</entry>
<entrylang="en"key="HIDDEN_VOL_CREATION_UNDER_HIDDEN_OS_HOWTO">For security reasons, when a hidden operating system is running, hidden volumes can be created only in the 'direct' mode (because outer volumes must always be mounted as read-only). To create a hidden volume securely, follow these steps:\n\n1) Boot the decoy system.\n\n2) Create a normal VeraCrypt volume and, to this volume, copy some sensitive-looking files that you actually do NOT want to hide (the volume will become the outer volume).\n\n3) Boot the hidden system and start the VeraCrypt Volume Creation Wizard. If the volume is file-hosted, move it to the system partition or to another hidden volume (otherwise, the newly created hidden volume would be mounted as read-only and could not be formatted). Follow the instructions in the wizard so as to select the 'direct' hidden volume creation mode.\n\n4) In the wizard, select the volume you created in step 2 and then follow the instructions to create a hidden volume within it.</entry>
<entrylang="en"key="HIDDEN_OS_WRITE_PROTECTION_BRIEF_INFO">For security reasons, when a hidden operating system is running, local unencrypted filesystems and non-hidden VeraCrypt volumes are mounted as read-only (no data can be written to such filesystems or VeraCrypt volumes).\n\nData is allowed to be written to any filesystem that resides within a hidden VeraCrypt volume (provided that the hidden volume is not located in a container stored on an unencrypted filesystem or on any other read-only filesystem).</entry>
<entrylang="en"key="HIDDEN_OS_WRITE_PROTECTION_EXPLANATION">There are three main reasons why such countermeasures have been implemented:\n\n- It enables the creation of a secure platform for mounting of hidden VeraCrypt volumes. Note that we officially recommend that hidden volumes are mounted only when a hidden operating system is running. (For more information, see the subsection 'Security Requirements and Precautions Pertaining to Hidden Volumes' in the documentation.)\n\n- In some cases, it is possible to determine that, at a certain time, a particular filesystem was not mounted under (or that a particular file on the filesystem was not saved or accessed from within) a particular instance of an operating system (e.g. by analyzing and comparing filesystem journals, file timestamps, application logs, error logs, etc). This might indicate that a hidden operating system is installed on the computer. The countermeasures prevent these issues.\n\n- It prevents data corruption and allows safe hibernation. When Windows resumes from hibernation, it assumes that all mounted filesystems are in the same state as when the system entered hibernation. VeraCrypt ensures this by write-protecting any filesystem accessible both from within the decoy and hidden systems. Without such protection, the filesystem could become corrupted when mounted by one system while the other system is hibernated.</entry>
<entrylang="en"key="DECOY_TO_HIDDEN_OS_DATA_TRANSFER_HOWTO">Note: If you need to securely transfer files from the decoy system to the hidden system, follow these steps:\n1) Start the decoy system.\n2) Save the files to an unencrypted volume or to an outer/normal VeraCrypt volume.\n3) Start the hidden system.\n4) If you saved the files to a VeraCrypt volume, mount it (it will be automatically mounted as read-only).\n5) Copy the files to the hidden system partition or to another hidden volume.</entry>
<entrylang="ka"key="ERR_GETTING_SYSTEM_ENCRYPTION_STATUS">სისტემის შიფრაციის სტატუსის მიღების დროს მოხდა შეცდომა.</entry>
<entrylang="en"key="ERR_PASSWORD_MISSING">No password specified in the command line. The volume can't be created.</entry>
<entrylang="en"key="ERR_SIZE_MISSING">No volume size specified in the command line. The volume can't be created.</entry>
<entrylang="en"key="ERR_NTFS_INVALID_VOLUME_SIZE">The volume file size specified in the command line is incompatible with selected NTFS filesystem.</entry>
<entrylang="en"key="ERR_FAT_INVALID_VOLUME_SIZE">The volume file size specified in the command line is incompatible with selected FAT32 filesystem.</entry>
<entrylang="en"key="ERR_DYNAMIC_NOT_SUPPORTED">The filesystem on the target drive doesn't support creating sparse files which is required for dynamic volumes.</entry>
<entrylang="en"key="ERR_DEVICE_CLI_CREATE_NOT_SUPPORTED">Only container files can be created through the command line.</entry>
<entrylang="en"key="ERR_CONTAINER_SIZE_TOO_BIG">The container file size specified in the command line is greater than the available disk free space. Volume can't be created.</entry>
<entrylang="en"key="ERR_VOLUME_SIZE_TOO_SMALL">The volume size specified in the command line is too small. The volume can't be created.</entry>
<entrylang="en"key="ERR_VOLUME_SIZE_TOO_BIG">The volume size specified in the command line is too big. The volume can't be created.</entry>
<entrylang="ka"key="INIT_SYS_ENC">ვერ ხერხდება სისტემის შიფრაციისათვის პროგრამის კომპონენტების ინიციალიზაცია.</entry>
<entrylang="ka"key="INIT_RAND">შემთხვევითი რიცხვების გენერატორის ინიციალიზაციის შეცდომა.</entry>
<entrylang="en"key="CAPI_RAND">Windows Crypto API failed!\n\n\n(If you report a bug in connection with this, please include the following technical information in the bug report:\n%hs, Last Error = 0x%.8X)</entry>
<entrylang="ka"key="INIT_REGISTER">პროგრამის ინიციალიზაციის შეცდომა. Dialog კლასის რეგისტრირება შეუძლებელია.</entry>
<entrylang="en"key="INIT_RICHEDIT">Error: Failed to load the Rich Edit system library.</entry>
<entrylang="ka"key="INTRO_TITLE">VeraCrypt-ის ტომების შექმნის ოსტატი</entry>
<entrylang="ka"key="MAX_HIDVOL_SIZE_BYTES">ამ ტომზე ფარული ტომის მაქსიმალური ზომა შეადგენს %.2f ბაიტს</entry>
<entrylang="ka"key="MAX_HIDVOL_SIZE_KB">ამ ტომზე ფარული ტომის მაქსიმალური ზომა შეადგენს %.2f კბ-ს</entry>
<entrylang="ka"key="MAX_HIDVOL_SIZE_MB">ამ ტომზე ფარული ტომის მაქსიმალური ზომა შეადგენს %.2f მბ-ს</entry>
<entrylang="en"key="MAX_HIDVOL_SIZE_GB">Maximum possible hidden volume size for this volume is %.2f GB.</entry>
<entrylang="en"key="MAX_HIDVOL_SIZE_TB">Maximum possible hidden volume size for this volume is %.2f TB.</entry>
<entrylang="ka"key="MOUNTED_NOPWCHANGE">მიერთებული ტომის პაროლის/გასაღების ფაილების შეცვლა შეუძლებელია. გამოაერთეთ ტომი.</entry>
<entrylang="ka"key="MOUNTED_NO_PKCS5_PRF_CHANGE">სანამ ტომი მიერთებულია, ამ ტომის სათაურის გასაღების დერივაციის ალგორითმის შეცვლა არ შეიძლება. ჯერ გამოაერთეთ ტომი.</entry>
<entrylang="ka"key="NEW_VERSION_REQUIRED">ამ ტომის მიერთებისათვის საჭიროა VeraCrypt-ის უფრო ახალი ვერსია.</entry>
<entrylang="ka"key="VOL_CREATION_WIZARD_NOT_FOUND">შეცდომა! ტომების შექმნის ოსტატი ვერ მოიძებნა.\n\nშეამოწმეთ, "VeraCrypt.exe"-ს ფოლდერში არის თუ არა ფაილი "VeraCrypt Format.exe". თუ არ არის, ხელახლა დააინსტალირეთ VeraCrypt ან მოძებნეთ დისკებზე ფაილი "VeraCrypt Format.exe" და გაუშვით.</entry>
<entrylang="en"key="VOL_EXPANDER_NOT_FOUND">Error: Volume Expander not found.\n\nPlease make sure that the file 'VeraCryptExpander.exe' is in the folder from which 'VeraCrypt.exe' was launched. If it is not, please reinstall VeraCrypt, or locate 'VeraCryptExpander.exe' on your disk and run it.</entry>
<entrylang="ka"key="NEXT">შემდეგ</entry>
<entrylang="ka"key="FINALIZE">მზადაა</entry>
<entrylang="ka"key="INSTALL">ინსტალაცია</entry>
<entrylang="ka"key="EXTRACT">დეარქივაცია</entry>
<entrylang="ka"key="NODRIVER">VeraCrypt-ის მოწყობილობის დრაივერთან მიერთება არ ხერხდება. VeraCrypt-ის ფუნქციონირება ამ დრაივერის გარეშე შეუძლებელია.\n\nმოწყობილობის დრაივერის ჩართვამდე, შესაძლოა საჭირო გახდეს სისტემიდან გამოსვლა ან სისტემის გადატვირთვა.</entry>
<entrylang="ka"key="NOT_FOUND">დისკის ასო არ მოიძებნა ან არ იქნა მითითებული.</entry>
<entrylang="en"key="ERR_CANNOT_ASSIGN_DRIVE_LETTER_NONSYS_DEC">Error: Cannot assign drive letter.\n\nUntil a drive letter is assigned to the decrypted volume, you will not be able to access data stored on the volume.\n\nRetry?</entry>
<entrylang="ka"key="DRIVE_LETTER_UNAVAILABLE">დისკის სახელი არ არის თავისუფალი.</entry>
<entrylang="ka"key="NO_FILE_SELECTED">ფაილი არ არის არჩეული.</entry>
<entrylang="ka"key="NO_FREE_DRIVES">დისკის თავისუფალი სახელები არ არის.</entry>
<entrylang="ka"key="NO_FREE_DRIVE_FOR_OUTER_VOL">დისკის თავისუფალი სახელი გარე ტომისათვის აღარ არის. ტომის შექმნის გაგრძელება შეუძლებელია.</entry>
<entrylang="ka"key="NO_OS_VER">ოპერაციული სისტემის ვერსიის განსაზღვრა ვერ მოხერხდა, ან გამოიყენება არათავსებადი სისტემა.</entry>
<entrylang="ka"key="NO_PATH_SELECTED">მისამართი არ არის მითითებული.</entry>
<entrylang="ka"key="NO_SPACE_FOR_HIDDEN_VOL">ფარილი ტომისათვის არასაკმარისი თავისუფალი ადგილია. ტომის შექმნის გაგრძელება შეუძლებელია.</entry>
<entrylang="en"key="HIDDEN_VOLUME_TOO_SMALL_FOR_OS_CLONE">Error: The files you copied to the outer volume occupy too much space. Therefore, there is not enough free space on the outer volume for the hidden volume.\n\nNote that the hidden volume must be as large as the system partition (the partition where the currently running operating system is installed). The reason is that the hidden operating system needs to be created by copying the content of the system partition to the hidden volume.\n\n\nThe process of creation of the hidden operating system cannot continue.</entry>
<entrylang="ka"key="OPENFILES_DRIVER">დრაივერის მიერ ტომის გამოერთება ვერ ხერხდება. შესაძლოა, ტომზე ფარული ფაილებია.</entry>
<entrylang="ka"key="OPENFILES_LOCK">ტომის ბლოკირება შეუძლებელია. მასზე განთავსებულია ფარული ფაილებია, ამიტომ მისი გამოერთება არ შეიძლება.</entry>
<entrylang="en"key="VOL_LOCK_FAILED_OFFER_FORCED_DISMOUNT">VeraCrypt cannot lock the volume because it is in use by the system or applications (there may be open files on the volume).\n\nDo you want to force dismount on the volume?</entry>
<entrylang="en"key="FORMAT_DEVICE_FOR_ADVANCED_ONLY">IMPORTANT: We strongly recommend that inexperienced users create a VeraCrypt file container on the selected device/partition, instead of attempting to encrypt the entire device/partition.\n\nWhen you create a VeraCrypt file container (as opposed to encrypting a device or partition) there is, for example, no risk of destroying a large number of files. Note that a VeraCrypt file container (even though it contains a virtual encrypted disk) is actually just like any normal file. For more information, see the chapter Beginner's Tutorial in the VeraCrypt User Guide.\n\nAre you sure you want to encrypt the entire device/partition?</entry>
<entrylang="ka"key="OVERWRITEPROMPT">გაფრთხილება: ფაილი '%s' უკვე არსებობს!\n\nVeraCrypt არ დაშიფრავს ფაილს, იგი წაიშლება. დარწმუნებული ხართ, რომ გსურთ ამ ფაილის წაშლა და ახალი ფაილ-კონტეინერის შექმნა?</entry>
<entrylang="en"key="NONSYS_INPLACE_ENC_CONFIRM">WARNING: You will not be able to mount the volume or access any files stored on it until it has been fully encrypted.\n\nAre you sure you want to start encrypting the selected %s '%s'%s?</entry>
<entrylang="en"key="NONSYS_INPLACE_DEC_CONFIRM">WARNING: You will not be able to mount the volume or access any files stored on it until it has been fully decrypted.\n\nAre you sure you want to start decrypting the selected %s '%s'%s?</entry>
<entrylang="en"key="NONSYS_INPLACE_ENC_CONFIRM_BACKUP">WARNING: Please note that if power supply is suddenly interrupted while encrypting/decrypting existing data in place, or when the operating system crashes due to a software error or hardware malfunction while VeraCrypt is encrypting/decrypting existing data in place, portions of the data will be corrupted or lost. Therefore, before you start encrypting/decrypting, please make sure that you have backup copies of the files you want to encrypt/decrypt.\n\nDo you have such a backup?</entry>
<entrylang="en"key="OVERWRITEPROMPT_DEVICE_HIDDEN_OS_PARTITION">CAUTION: ANY FILES CURRENTLY STORED ON THE PARTITION '%s'%s (I.E. ON THE FIRST PARTITION BEHIND THE SYSTEM PARTITION) WILL BE ERASED AND LOST (THEY WILL NOT BE ENCRYPTED)!\n\nAre you sure you want to proceed with format?</entry>
<entrylang="en"key="OVERWRITEPROMPT_DEVICE_SECOND_WARNING_LOTS_OF_DATA">WARNING: THE SELECTED PARTITION CONTAINS A LARGE AMOUNT OF DATA! Any files stored on the partition will be erased and lost (they will NOT be encrypted)!</entry>
<entrylang="en"key="ERASE_FILES_BY_CREATING_VOLUME">Erase any files stored on the partition by creating a VeraCrypt volume within it</entry>
<entrylang="ka"key="PASSWORD">პაროლი</entry>
<entrylang="en"key="PIM">PIM</entry>
<entrylang="ka"key="IDD_PCDM_CHANGE_PKCS5_PRF">სათაურის გასაღების დერივაციის ალგორითმი</entry>
<entrylang="ka"key="IDD_PCDM_ADD_REMOVE_VOL_KEYFILES">ტომ(ებ)იდან გასაღების ფაილ(ებ)ის დამატება/წაშლა</entry>
<entrylang="ka"key="IDD_PCDM_REMOVE_ALL_KEYFILES_FROM_VOL">ტომიდან ყველა გასაღების ფაილის წაშლა</entry>
<entrylang="en"key="PASSWORD_CHANGED">Password, PIM and/or keyfile(s) successfully changed.\n\nIMPORTANT: Please make sure you have read the section 'Changing Passwords and Keyfiles' in the chapter 'Security Requirements and Precautions' in the VeraCrypt User Guide.</entry>
<entrylang="en"key="FAVORITE_PIM_CHANGED">This volume is registered as a System Favorite and its PIM was changed.\nDo you want VeraCrypt to automatically update the System Favorite configuration (administrator privileges required)?\n\nPlease note that if you answer no, you'll have to update the System Favorite manually.</entry>
<entrylang="en"key="SYS_PASSWORD_CHANGED_ASK_RESCUE_DISK">IMPORTANT: If you did not destroy your VeraCrypt Rescue Disk, your system partition/drive can still be decrypted using the old password (by booting the VeraCrypt Rescue Disk and entering the old password). You should create a new VeraCrypt Rescue Disk and then destroy the old one.\n\nDo you want to create a new VeraCrypt Rescue Disk?</entry>
<entrylang="ka"key="SYS_HKD_ALGO_CHANGED_ASK_RESCUE_DISK">შენიშვნა:VeraCrypt-ის აღმდგენი დისკი ჯერჯერობით ისევ ძველ ალგორითმს იყენებს. თუ ძველი ალგორითმი დაუცველად მიგაჩბნიათ, მაშინ შექმენით ახალი აღმდგენი დისკი და ძველი გაანადგურეთ.\n\nგსურთ ახალი აღმდგენი დისკის შექმნა?</entry>
<entrylang="en"key="KEYFILES_NOTE">Any kind of file (for example, .mp3, .jpg, .zip, .avi) may be used as a VeraCrypt keyfile. Note that VeraCrypt never modifies the keyfile contents. You can select more than one keyfile (the order does not matter). If you add a folder, all non-hidden files found in it will be used as keyfiles. Click 'Add Token Files' to select keyfiles stored on security tokens or smart cards (or to import keyfiles to security tokens or smart cards).</entry>
<entrylang="ka"key="KEYFILE_CHANGED">გასაღების ფაილები წარმატებით დაემატა/წაიშალა.</entry>
<entrylang="ka"key="PKCS5_PRF_CHANGED">სათაურის გასაღების დერივაციის ალგორითმი წარმატებით დაყენდა.</entry>
<entrylang="en"key="NONSYS_INPLACE_ENC_RESUME_PASSWORD_PAGE_HELP">Please enter the password and/or keyfile(s) for the non-system volume where you want to resume the process of in-place encryption.\n\n\nRemark: After you click Next, VeraCrypt will attempt to find all non-system volumes where the process of encryption has been interrupted and where the VeraCrypt volume header can be decrypted using the supplied password and/or keyfile(s). If more than one such volume is found, you will need to select one of them in the next step.</entry>
<entrylang="en"key="NONSYS_INPLACE_ENC_RESUME_VOL_SELECT_HELP">Please select one of the listed volumes. The list contains every accessible non-system volume where the process of encryption has been interrupted and whose header could be decrypted using the supplied password and/or keyfile(s).</entry>
<entrylang="en"key="NONSYS_INPLACE_DEC_PASSWORD_PAGE_HELP">Please enter the password and/or keyfile(s) for the non-system VeraCrypt volume that you want to decrypt.</entry>
<entrylang="en"key="PASSWORD_HELP">It is very important that you choose a good password. You should avoid choosing one that contains only a single word that can be found in a dictionary (or a combination of 2, 3, or 4 such words). It should not contain any names or dates of birth. It should not be easy to guess. A good password is a random combination of upper and lower case letters, numbers, and special characters, such as @ ^ = $ * + etc. We recommend choosing a password consisting of 20 or more characters (the longer, the better). The maximum possible length is 128 characters.</entry>
<entrylang="en"key="PASSWORD_HIDDEN_OS_HELP">Please choose a password for the hidden operating system (i.e. for the hidden volume). </entry>
<entrylang="en"key="PASSWORD_HIDDEN_OS_NOTE">IMPORTANT: The password that you choose for the hidden operating system in this step must be substantially different from the other two passwords (i.e. from the password for the outer volume and from the password for the decoy operating system).</entry>
<entrylang="ka"key="PASSWORD_HIDDENVOL_HOST_DIRECT_HELP">შეიტანეთ პაროლი ტომისათვის, რომლის შიგნით შეიქმნება ფარული ტომი.\n\n"შემდეგ"-ის დაჭერით VeraCrypt შეეცდება მიაერთოს ტომი, რის შემდეგაც მოხდება მიერებულ ტომზე თავისუფალი არის კლასტერების რუკის სკანირება, რომლის ბოლოშიც იქნება ტომის დაბოლოება. ამ ადგილას განთავსდება ფარული ტომი, ანუ განისაზღვრება მისი მაქსიმალური ზომა. რუკის სკანირება გარანტიას იძლევა, რომ ფარული ტომის მონაცემები არ დააზიანებს გარე ტომის მონაცემებს.</entry>
<entrylang="en"key="PASSWORD_HIDDENVOL_HOST_HELP">\nPlease choose a password for the outer volume. This will be the password that you will be able to reveal to an adversary if you are asked or forced to do so.\n\nIMPORTANT: The password must be substantially different from the one you will choose for the hidden volume.\n\nNote: The maximum possible password length is 128 characters.</entry>
<entrylang="en"key="PASSWORD_SYSENC_OUTERVOL_HELP">Please choose a password for the outer volume. This will be the password you will be able to reveal to anyone forcing you to disclose the password for the first partition behind the system partition, where both the outer volume and the hidden volume (containing the hidden operating system) will reside. The existence of the hidden volume (and of the hidden operating system) will remain secret. Note that this password is not for the decoy operating system.\n\nIMPORTANT: The password must be substantially different from the one you will choose for the hidden volume (i.e. for the hidden operating system).</entry>
<entrylang="ka"key="PASSWORD_HIDVOL_HOST_TITLE">გარე ტომის პაროლი</entry>
<entrylang="ka"key="PASSWORD_HIDVOL_TITLE">ფარული ტომის პაროლი</entry>
<entrylang="en"key="PASSWORD_HIDDEN_OS_TITLE">Password for Hidden Operating System</entry>
<entrylang="ka"key="PASSWORD_LENGTH_WARNING">ყურადღება: მოკლე პაროლები ადვილი გამოსაცნობია გადარჩევის ხერხით.\n\nრეკომენდებულია 20 სიმბოლოზე გრძელი პაროლების გამოყენება.\n\nნამდვილად გსურთ მაკლე პაროლის გამოყენება?</entry>
<entrylang="en"key="PIM_HIDDEN_OS_TITLE">PIM for Hidden Operating System</entry>
<entrylang="en"key="PIM_HELP">PIM (Personal Iterations Multiplier) is a value that controls the number of iterations used by the header key derivation as follows:\n Iterations = 15000 + (PIM x 1000).\n\nWhen left empty or set to 0, VeraCrypt will use a default value (485) that ensures a high security.\n\nWhen the password is less than 20 characters, PIM can't be smaller than 485 in order to maintain a minimal security level.\nWhen the password is 20 characters or more, PIM can be set to any value.\n\nA PIM value larger than 485 will lead to slower mount. A small PIM value (less than 485) will lead to a quicker mount but it can reduce security if the password is not strong enough.</entry>
<entrylang="en"key="PIM_SYSENC_HELP">PIM (Personal Iterations Multiplier) is a value that controls the number of iterations used by the header key derivation as follows:\n Iterations = PIM x 2048.\n\nWhen left empty or set to 0, VeraCrypt will use a default value that ensures a high security.\n\nWhen the password is less than 20 characters, PIM can't be smaller than 98 in order to maintain a minimal security level.\nWhen the password is 20 characters or more, PIM can be set to any value.\n\nA PIM value larger than 98 will lead to slower boot. A small PIM value (less than 98) will lead to a quicker boot but it can reduce security if the password is not strong enough.</entry>
<entrylang="en"key="PIM_SYSENC_CHANGE_WARNING">Remember Number to Boot System</entry>
<entrylang="en"key="PIM_LARGE_WARNING">You have chosen a PIM value that is larger than VeraCrypt default value.\nPlease note that this will lead to much slower mount/boot.</entry>
<entrylang="en"key="PIM_SMALL_WARNING">You have chosen a Personal Iterations Multiplier (PIM) that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to a weaker security.\n\nDo you confirm that you are using a strong password?</entry>
<entrylang="en"key="PIM_SYSENC_TOO_BIG">Personal Iterations Multiplier (PIM) maximum value for system encryption is 65535.</entry>
<entrylang="en"key="PIM_TITLE">Volume PIM</entry>
<entrylang="en"key="HIDDEN_FILES_PRESENT_IN_KEYFILE_PATH">\n\nWARNING: Hidden file(s) have been found in a keyfile search path. Such hidden files cannot be used as keyfiles. If you need to use them as keyfiles, remove their 'Hidden' attribute (right-click each of them, select 'Properties', uncheck 'Hidden' and click OK). Note: Hidden files are visible only if the corresponding option is enabled (Computer > Organize > 'Folder and search options' > View).</entry>
<entrylang="en"key="HIDDEN_VOL_PROT_PASSWORD_US_KEYB_LAYOUT">If you are attempting to protect a hidden volume containing a hidden system, please make sure you are using the standard US keyboard layout when typing the password for the hidden volume. This is required due to the fact that the password needs to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available.</entry>
<entrylang="en"key="FOUND_NO_PARTITION_W_DEFERRED_INPLACE_ENC">VeraCrypt has not found any volume where non-system encryption has been interrupted and where the volume header can be decrypted using the supplied password and/or keyfile(s).\n\nPlease make sure the password and/or keyfile(s) are correct and that the partition/volume is not being used by the system or applications (including antivirus software).</entry>
<entrylang="en"key="SELECTED_PARTITION_ALREADY_INPLACE_ENC">The selected partition/device is already fully encrypted.\nHeader Flags = 0x%.8X</entry>
<entrylang="en"key="SELECTED_PARTITION_NOT_INPLACE_ENC">The selected partition/device is not using in-place encryption.\nHeader Flags = 0x%.8X</entry>
<entrylang="ka"key="SYSENC_MOUNT_WITHOUT_PBA_NOTE">\n\nშენიშვნა: თუ ცდილობთ დაშიფრულ სისტემურ დისკზე მოთავსებული განაყოფის მიერთებას, ჩატვირთვისწინა აუთენტიფიკაციის გარეშე ან დაშიფრული სისტემური განაყოფის მიერთებას, რომელზეც სისტემა არ მუშაობს, მაშინ აირჩიეთ "სისტემა">"ჩატვირთვისწინა აუთენტიფიკაციის გარეშე".</entry>
<entrylang="en"key="MOUNT_WITHOUT_PBA_VOL_ON_ACTIVE_SYSENC_DRIVE">In this mode, you cannot mount a partition located on a drive whose portion is within the key scope of active system encryption.\n\nBefore you can mount this partition in this mode, you need to either boot an operating system installed on a different drive (encrypted or unencrypted) or boot an unencrypted operating system.</entry>
<entrylang="en"key="CANT_DECRYPT_PARTITION_ON_ENTIRELY_ENCRYPTED_SYS_DRIVE">VeraCrypt cannot decrypt an individual partition on an entirely encrypted system drive (you can decrypt only the entire system drive).</entry>
<entrylang="en"key="CANT_DECRYPT_PARTITION_ON_ENTIRELY_ENCRYPTED_SYS_DRIVE_UNSURE">Warning: As the drive contains the VeraCrypt Boot Loader, it may be an entirely encrypted system drive. If it is, please note that VeraCrypt cannot decrypt an individual partition on an entirely encrypted system drive (you can decrypt only the entire system drive). If that is the case, you will be able to continue now but you will receive the 'Incorrect password' error message later.</entry>
<entrylang="ka"key="PREV">უკან</entry>
<entrylang="ka"key="RAWDEVICES">სისტემაში არსებული raw-მოწყობილობების სიის ჩვენება შეუძლებელია.</entry>
<entrylang="ka"key="READONLYPROMPT">ტომი '%s' არსებობს და წვდომადია მხოლოდ კითხვისათვის. ნამდვილად გსურთ მისი შეცვლა?</entry>
<entrylang="ka"key="SELECT_KEYFILE">აირჩიეთ გასაღების ფაილი</entry>
<entrylang="ka"key="SELECT_KEYFILE_PATH">აირჩიეთ გასაღების ფაილების ძიების მისამართი. ყურადღება: შეინახება მხოლოდ მისამართი, და არა ფაილების სახელები.</entry>
<entrylang="en"key="SELECT_KEYFILE_GENERATION_DIRECTORY">Select a directory where to store the keyfiles.</entry>
<entrylang="en"key="SELECTED_KEYFILE_IS_CONTAINER_FILE">The current container file was selected as a keyfile. It will be skipped.</entry>
<entrylang="ka"key="SERPENT_HELP">შემუშავებულია როს ანდერსონის, ელი ბიჰამის და ლარს კნუდსენის მიერ. გამოქვეყნდა 1998წ. 256-ბიტი გასაღები, 128-ბიტი ბლოკი. ქმედების რეჟიმი - XTS. AES-ის ფინალისტი.</entry>
<entrylang="en"key="SIZE_HELP">Please specify the size of the container you want to create.\n\nIf you create a dynamic (sparse-file) container, this parameter will specify its maximum possible size.\n\nNote that the minimum possible size of a FAT volume is 292 KB. The minimum possible size of an NTFS volume is 3792 KB.</entry>
<entrylang="en"key="SIZE_HELP_HIDDEN_HOST_VOL">Please specify the size of the outer volume to be created (you will first create the outer volume and then a hidden volume within it). The minimum possible size of a volume within which a hidden volume is intended to be created is 340 KB.</entry>
<entrylang="en"key="SIZE_HELP_HIDDEN_VOL">Please specify the size of the hidden volume to create. The minimum possible size of a hidden volume is 40 KB (or 3664 KB if it is formatted as NTFS). The maximum possible size you can specify for the hidden volume is displayed above.</entry>
<entrylang="ka"key="SIZE_HIDVOL_HOST_TITLE">გარე ტომის ზომა</entry>
<entrylang="ka"key="SIZE_HIDVOL_TITLE">ფარული ტომის ზომა</entry>
<entrylang="en"key="SIZE_PARTITION_HELP">Please verify that the size of the selected device/partition shown above is correct and click Next.</entry>
<entrylang="en"key="SIZE_PARTITION_HIDDEN_SYSENC_HELP">The outer volume and the hidden volume (containing the hidden operating system) will reside within the above partition. It should be the first partition behind the system partition.\n\nPlease verify that the size of the partition and its number shown above are correct, and if they are, click Next.</entry>
<entrylang="en"key="SIZE_PARTITION_HIDDEN_VOL_HELP">\n\nNote that the minimum possible size of a volume within which a hidden volume is intended to be created is 340 KB.</entry>
<entrylang="ka"key="TEST_INCORRECT_TEST_DATA_UNIT_SIZE">მითითებული მონაცემთა ერთეულის ნომერი ძალიან გრძელი ან ძალიან მოკლეა.</entry>
<entrylang="ka"key="TEST_INCORRECT_SECONDARY_KEY_SIZE">მითითებული მეორეადი გასაღები ძალიან გრძელი ან ძალიან მოკლეა.</entry>
<entrylang="ka"key="TEST_CIPHERTEXT_SIZE">სატესტო დაშიფრული ტექსტის სიგრძე არასწორია.</entry>
<entrylang="ka"key="TEST_KEY_SIZE">სატესტო გასაღების სიგრძე არასწორია.</entry>
<entrylang="ka"key="TEST_PLAINTEXT_SIZE">სატესტო ღია ტექსტის სიგრძე არასწორია.</entry>
<entrylang="ka"key="TWO_LAYER_CASCADE_HELP">ორი შიფრი, მოქმედი კასკადურად XTS რეჟიმში. ყოველი ბლოკი იშიფრება ჯერ %s-ით (%d-ბიტი გასაღები) და შემდგომ %s-ით (%d-ბიტი გასაღები). ყოველი შიფრი იყენებს დამოუკიდებელ გასაღებს.</entry>
<entrylang="ka"key="THREE_LAYER_CASCADE_HELP">სამი შიფრი, მოქმედი კასკადურად XTS რეჟიმში. ყოველი ბლოკი იშიფრება %s-ით (%d-ბიტი გასაღები), %s-ით (%d-ბიტი გასაღები), და %s-ით (%d-ბიტი გასაღები). ყოველი შიფრი იყენებს დამოუკიდებელ გასაღებს.</entry>
<entrylang="en"key="AUTORUN_MAY_NOT_ALWAYS_WORK">Note that, depending on the operating system configuration, these auto-run and auto-mount features may work only when the traveler disk files are created on a non-writable CD/DVD-like medium. Also note that this is not a bug in VeraCrypt (it is a limitation of Windows).</entry>
<entrylang="en"key="TRAVELER_DISK_CREATED">VeraCrypt traveler disk has been successfully created.\n\nNote that you need administrator privileges to run VeraCrypt in portable mode. Also note that, after examining the registry file, it may be possible to tell that VeraCrypt was run on a Windows system even if it is run in portable mode.</entry>
<entrylang="ka"key="TWOFISH_HELP">შემუშავებულია ბრუს შნეიერის, ჯონ კელსის, დაგ ვაითინგის, დევიდ ვაგნერის, კრის ჰოლის და ნილს ფერგიუსონის მიერ. გამოქვეყნდა 1998წ. 256-ბიტი გასაღები, 128-ბიტი ბლოკი. ქმედების რეჟიმი-XTS. AES ფინალისტი.</entry>
<entrylang="ka"key="MORE_INFO_ABOUT">დამატებით ინფორმაცია იხ. %s</entry>
<entrylang="ka"key="UNKNOWN">უცნობია</entry>
<entrylang="en"key="ERR_UNKNOWN">An unspecified or unknown error occurred (%d).</entry>
<entrylang="ka"key="UNMOUNTALL_LOCK_FAILED">ზოგიერთი ტომი შეიცავს ფაილებს ან ფოლდერებს, რომლებიც გამოიყენება სისტემის ან პროგრამების მიერ.\n\nმაინც გსურთ გამოერთება?</entry>
<entrylang="ka"key="UNMOUNT_LOCK_FAILED">ტომი შეიცავს ფაილებს ან ფოლდერებს, რომლებიც გამოიყენება სისტემის ან პროგრამების მიერ.\n\nმაინც გსურთ გამოერთება?</entry>
<entrylang="en"key="NO_VOLUME_MOUNTED_TO_DRIVE">No volume is mounted to the specified drive letter.</entry>
<entrylang="ka"key="VOL_ALREADY_MOUNTED">ეს ტომი უკვე მიერთებულია. </entry>
<entrylang="ka"key="VOL_MOUNT_FAILED">შეცდომა ტომის მიერთების მცდელობისას.</entry>
<entrylang="ka"key="VOL_SIZE_WRONG">შეცდომა: ტომის არასწორი ზომა.</entry>
<entrylang="en"key="WARN_QUICK_FORMAT">WARNING: You should use Quick Format only in the following cases:\n\n1) The device contains no sensitive data and you do not need plausible deniability.\n2) The device has already been securely and fully encrypted.\n\nAre you sure you want to use Quick Format?</entry>
<entrylang="en"key="CONFIRM_SPARSE_FILE">Dynamic container is a pre-allocated NTFS sparse file whose physical size (actual disk space used) grows as new data is added to it.\n\nWARNING: Performance of sparse-file-hosted volumes is significantly worse than performance of regular volumes. Sparse-file-hosted volumes are also less secure, because it is possible to tell which volume sectors are unused. Furthermore, sparse-file-hosted volumes cannot provide plausible deniability (host a hidden volume). Also note that if data is written to a sparse file container when there is not enough free space in the host file system, the encrypted file system may get corrupted.\n\nAre you sure you want to create a sparse-file-hosted volume?</entry>
<entrylang="en"key="SPARSE_FILE_SIZE_NOTE">Note that the size of the dynamic container reported by Windows and by VeraCrypt will always be equal to its maximum size. To find out current physical size of the container (actual disk space it uses), right-click the container file (in a Windows Explorer window, not in VeraCrypt), then select 'Properties' and see the 'Size on disk' value.\n\nAlso note that if you move a dynamic container to another volume or drive, the physical size of the container will be extended to the maximum. (You can prevent that by creating a new dynamic container in the destination location, mounting it and then moving the files from the old container to the new one.)</entry>
<entrylang="en"key="PASSWORD_CACHE_WIPED">Passwords (and/or processed keyfile contents) stored in the VeraCrypt driver cache have been wiped.</entry>
<entrylang="ka"key="WRONG_VOL_TYPE">VeraCrypt ვერ შეცვლის მისთვის უცნობი ტიპის ტომის პაროლს.</entry>
<entrylang="ka"key="SELECT_FREE_DRIVE">აირჩიეთ სიიდან დისკის თავისუფალი ასო.</entry>
<entrylang="ka"key="SELECT_A_MOUNTED_VOLUME">აირჩიეთ დისკების ასოების სიაში მიერთებული ტომი.</entry>
<entrylang="en"key="AMBIGUOUS_VOL_SELECTION">Warning: Two different volumes/devices are currently selected (the first is selected in the drive letter list and the second is selected in the input field below the drive letter list).\n\nPlease confirm your choice:</entry>
<entrylang="ka"key="CANT_CREATE_AUTORUN">შეცდომა: autorun.inf ფაილის შექმნა შეუძლებელია</entry>
<entrylang="ka"key="ERR_PROCESS_KEYFILE">შეცდომა გასაღების ფაილის დამუშავებისას.</entry>
<entrylang="ka"key="ERR_PROCESS_KEYFILE_PATH">შეცდომა გასაღების ფაილის მისამართის დამუშავებისას.</entry>
<entrylang="en"key="ERR_KEYFILE_PATH_EMPTY">The keyfile path contains no files.\n\nPlease note that folders (and files they contain) found in keyfile search paths are ignored.</entry>
<entrylang="ka"key="UNSUPPORTED_OS">VeraCrypt არათავსებადია ამ ოპერაციულ სისტემასთან.</entry>
<entrylang="en"key="UNSUPPORTED_BETA_OS">Error: VeraCrypt supports only stable versions of this operating system (beta/RC versions are not supported).</entry>
<entrylang="ka"key="ERR_PERF_COUNTER">შეცდომა: წარმადობის მთვლელის მნიშვნელობის აღდგენა შეუძლებელია.</entry>
<entrylang="ka"key="ERR_VOL_FORMAT_BAD">შეცდომა: ტომის არასწორი ფორმატი.</entry>
<entrylang="en"key="ERR_HIDDEN_NOT_NORMAL_VOLUME">Error: You supplied a password for a hidden volume (not for a normal volume).</entry>
<entrylang="en"key="ERR_HIDDEN_VOL_HOST_ENCRYPTED_INPLACE">For security reasons, a hidden volume cannot be created within a VeraCrypt volume containing a filesystem that has been encrypted in place (because the free space on the volume has not been filled with random data).</entry>
<entrylang="ka"key="FORMAT_NTFS_FAILED">Windows ვერ აფორმატირებს ამ ტომს, როგორც NTFS.\n\nაირჩიეთ სხვა ფაილური სისტემა და გაიმეორეთ ცდა. ან შეგიძლიათ დასტოვოთ ეს ტომი დაუფორმატებელი (ფაილური სისტემის არჩევის ველში მიუთითეთ "არა"), დახურეტ ოსტატის ფანჯარა, მიაერთეთ ტომი, შემდეგ კი სისტემური ან სხვა უტილიტის დააფორმატირეთ მიერთებული ტომი (ამ დროს ტომი დაშიფრული რჩება).</entry>
<entrylang="ka"key="FORMAT_NTFS_FAILED_ASK_FAT">ტომის NTFS ფორმატირება არ მოხერხდა.\n\nგსურთ დააფორმატოთ ტომი როგორც FAT?</entry>
<entrylang="ka"key="CLUSTER_TOO_SMALL">ამ ტომისათვის არჩეულია კლასტერების მეტად მცირე ზომა. გამოყენებულ იქნება შედარებით დიდი ზომის კლასტერი.</entry>
<entrylang="ka"key="CANT_GET_VOLSIZE">შეცდომა! ტომის ზომის დათვლა შეუძლებელია.\n\nშეამოწმეთ, ხომ არ გამოიყენება არჩეული ტომი სისტემის ან სხვა პროგრამის მიერ.</entry>
<entrylang="en"key="HIDDEN_VOL_HOST_SPARSE">Hidden volumes must not be created within dynamic (sparse file) containers. To achieve plausible deniability, the hidden volume needs to be created within a non-dynamic container.</entry>
<entrylang="ka"key="HIDDEN_VOL_HOST_UNSUPPORTED_FILESYS">VeraCrypt-ის ტომების შექმნის ოსტატს ფარული ტომის შექმნა შეუძლია მხოლოდ FAT ან NTFS ტომში.</entry>
<entrylang="ka"key="HIDDEN_VOL_HOST_UNSUPPORTED_FILESYS_WIN2000">Windows 2000-ში, VeraCrypt-ის ტომების შექმნის ოსტატს ფარული ტომის შექმნა შეუძლია მხოლოდ FAT ტომში.</entry>
<entrylang="en"key="HIDDEN_VOL_HOST_NTFS">Note: The FAT/exFAT file system is more suitable for outer volumes than the NTFS file system (for example, the maximum possible size of the hidden volume would very likely have been significantly greater if the outer volume had been formatted as FAT/exFAT).</entry>
<entrylang="en"key="HIDDEN_VOL_HOST_NTFS_ASK">Note that the FAT/exFAT file system is more suitable for outer volumes than the NTFS file system. For example, the maximum possible size of the hidden volume will very likely be significantly greater if the outer volume is formatted as FAT/exFAT (the reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume can reside only in the second half of the outer volume).\n\nAre you sure you want to format the outer volume as NTFS?</entry>
<entrylang="en"key="OFFER_FAT_FORMAT_ALTERNATIVE">Do you want to format the volume as FAT instead?</entry>
<entrylang="en"key="FAT_NOT_AVAILABLE_FOR_SO_LARGE_VOLUME">Note: This volume cannot be formatted as FAT, because it exceeds the maximum volume size supported by the FAT32 filesystem for the applicable sector size (2 TB for 512-byte sectors and 16 TB for 4096-byte sectors).</entry>
<entrylang="en"key="PARTITION_TOO_SMALL_FOR_HIDDEN_OS">Error: The partition for the hidden operating system (i.e. the first partition behind the system partition) must be at least 5% larger than the system partition (the system partition is the one where the currently running operating system is installed).</entry>
<entrylang="en"key="PARTITION_TOO_SMALL_FOR_HIDDEN_OS_NTFS">Error: The partition for the hidden operating system (i.e. the first partition behind the system partition) must be at least 110% (2.1 times) larger than the system partition (the system partition is the one where the currently running operating system is installed). The reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume (which is to contain a clone of the system partition) can reside only in the second half of the partition.</entry>
<entrylang="en"key="OUTER_VOLUME_TOO_SMALL_FOR_HIDDEN_OS_NTFS">Error: If the outer volume is formatted as NTFS, it must be at least 110% (2.1 times) larger than the system partition. The reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume (which is to contain a clone of the system partition) can reside only in the second half of the outer volume.\n\nNote: The outer volume needs to reside within the same partition as the hidden operating system (i.e. within the first partition behind the system partition).</entry>
<entrylang="en"key="NO_PARTITION_FOLLOWS_BOOT_PARTITION">Error: There is no partition behind the system partition.\n\nNote that before you can create a hidden operating system, you need to create a partition for it on the system drive. It must be the first partition behind the system partition and it must be at least 5% larger than the system partition (the system partition is the one where the currently running operating system is installed). However, if the outer volume (not to be confused with the system partition) is formatted as NTFS, the partition for the hidden operating system must be at least 110% (2.1 times) larger than the system partition (the reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume, which is to contain a clone of the system partition, can reside only in the second half of the partition).</entry>
<entrylang="en"key="TWO_SYSTEMS_IN_ONE_PARTITION_REMARK">Remark: It is not practical (and therefore is not supported) to install operating systems in two VeraCrypt volumes that are embedded within a single partition, because using the outer operating system would often require data to be written to the area of the hidden operating system (and if such write operations were prevented using the hidden volume protection feature, it would inherently cause system crashes, i.e. 'Blue Screen' errors).</entry>
<entrylang="en"key="FOR_MORE_INFO_ON_PARTITIONS">For information on how to create and manage partitions, please refer to the documentation supplied with your operating system or contact your computer vendor's technical support team for assistance.</entry>
<entrylang="en"key="SYSTEM_PARTITION_NOT_ACTIVE">Error: The currently running operating system is not installed on the boot partition (first Active partition). This is not supported.</entry>
<entrylang="en"key="CONFIRM_FAT_FOR_FILES_OVER_4GB">You indicated that you intend to store files larger than 4 GB in this VeraCrypt volume. However, you chose the FAT file system, on which files larger than 4 GB cannot be stored.\n\nAre you sure you want to format the volume as FAT?</entry>
<entrylang="en"key="NONSYS_INPLACE_DECRYPTION_BAD_VOL_FORMAT">Error: VeraCrypt does not support in-place decryption of legacy non-system volumes created by VeraCrypt 1.0b or earlier.\n\nNote: You can still decrypt files stored on the volume by copying/moving them to any unencrypted volume.</entry>
<entrylang="en"key="NONSYS_INPLACE_DECRYPTION_CANT_DECRYPT_HID_VOL">Error: VeraCrypt cannot in-place decrypt a hidden VeraCrypt volume.\n\nNote: You can still decrypt files stored on the volume by copying/moving them to any unencrypted volume.</entry>
<entrylang="en"key="CONFIRM_VOL_CONTAINS_NO_HIDDEN_VOL">Warning: Note that VeraCrypt cannot in-place decrypt a volume that contains a hidden VeraCrypt volume (the hidden volume would be overwritten with pseudorandom data).\n\nPlease confirm that the volume you are about to decrypt contains no hidden volume.\n\nNote: If the volume contains a hidden volume but you do not mind losing the hidden volume, you can select Proceed (the outer volume will be safely decrypted).</entry>
<entrylang="en"key="VOL_CONTAINS_NO_HIDDEN_VOL">The volume does not contain any hidden volume. Proceed.</entry>
<entrylang="en"key="VOL_CONTAINS_A_HIDDEN_VOL">The volume contains a hidden volume. Cancel.</entry>
<entrylang="ka"key="CANT_ACCESS_VOL">შეცდომა! ტომთან წვდომა არ არის.\n\nშეამოწმეთ, არსებობს თუ არა ეს ტომი, არ არის მიერთებული, არ გამოიყენება სისტემის ან სხვა პროგრამის მიერ, და დაცული არ არის ჩაწერისაგან.</entry>
<entrylang="en"key="INPLACE_ENC_CANT_ACCESS_OR_GET_INFO_ON_VOL">Error: Cannot access the volume and/or obtain information about the volume.\n\nMake sure that the selected volume exists, that it is not being used by the system or applications, that you have read/write permission for the volume, and that it is not write-protected.</entry>
<entrylang="en"key="INPLACE_ENC_CANT_ACCESS_OR_GET_INFO_ON_VOL_ALT">Error: Cannot access the volume and/or obtain information about the volume. Make sure that the selected volume exists, that it is not being used by the system or applications, that you have read/write permission for the volume, and that it is not write-protected.\n\nIf the problem persists, it might help to follow the below steps.</entry>
<entrylang="en"key="INPLACE_ENC_GENERIC_ERR_ALT_STEPS">An error prevented VeraCrypt from encrypting the partition. Please try fixing any previously reported problems and then try again. If the problems persist, it might help to follow the below steps.</entry>
<entrylang="en"key="INPLACE_ENC_GENERIC_ERR_RESUME">An error prevented VeraCrypt from resuming the process of encryption of the partition.\n\nPlease try fixing any previously reported problems and then try resuming the process again. Note that the volume cannot be mounted until it has been fully encrypted.</entry>
<entrylang="en"key="INPLACE_DEC_GENERIC_ERR">An error prevented VeraCrypt from decrypting the volume. Please try fixing any previously reported problems and then try again if possible.</entry>
<entrylang="ka"key="CANT_DISMOUNT_OUTER_VOL">შეცდომა! გარე ტომის გამოერთება შეუძლებელია.\n\nტომის გამოერთება შეუძლებელია, თუ იგი შეიცავს ფაილებს ან ფოლდერებს, რომლებიც გამოიყენება სისტემის ან სხვა პროგრამის მიერ.\n\nდახურეთ ყველა პროგრამა, რომლებიც შესაძლოა იყენებენ ფაილებს ამ ტომში, და დააჭირეთ "გამეორება"-ს.</entry>
<entrylang="ka"key="CANT_GET_OUTER_VOL_INFO">შეცდომა: გარე ტომის შესახებ ინფორმაციის მიღება ვერ ხერხდება! ტომის შექმნის პროცესი შეწყვეტილია.</entry>
<entrylang="ka"key="CANT_ACCESS_OUTER_VOL">შეცდომა! გარე ტომთან წვდომა არ არის. ტომის შექმნის გაგრძელება შეუძლებელია.</entry>
<entrylang="ka"key="CANT_MOUNT_OUTER_VOL">შეცდომა! გარე ტომის მიერთება შეუძლებელია. ტომის შექმნის გაგრძელება შეუძლებელია.</entry>
<entrylang="ka"key="CANT_GET_CLUSTER_BITMAP">შეცდომა! ტომის კლასტერების რუკის მიღება შეუძლებელია. ტომის შექმნის გაგრძელება შეუძლებელია.</entry>
<entrylang="en"key="SETUP_MODE_INFO">Select one of the modes. If you are not sure which to select, use the default mode.</entry>
<entrylang="en"key="SETUP_MODE_HELP_INSTALL">Select this option if you want to install VeraCrypt on this system.</entry>
<entrylang="en"key="SETUP_MODE_HELP_UPGRADE">Note: You can upgrade without decrypting even if the system partition/drive is encrypted or you use a hidden operating system.</entry>
<entrylang="en"key="SETUP_MODE_HELP_EXTRACT">If you select this option, all files will be extracted from this package but nothing will be installed on the system. Do not select it if you intend to encrypt the system partition or system drive. Selecting this option can be useful, for example, if you want to run VeraCrypt in so-called portable mode. VeraCrypt does not have to be installed on the operating system under which it is run. After all files are extracted, you can directly run the extracted file 'VeraCrypt.exe' (then VeraCrypt will run in portable mode).</entry>
<entrylang="ka"key="EXTRACTION_FINISHED_INFO">ყველა ფაილი წარმატებით იქნა დეარქივირებული მითითებულ მისამართზე.</entry>
<entrylang="ka"key="AUTO_FOLDER_CREATION">თუ მითითებული ფოლდერი არ არსებობს, იგი ავტომატურად შეიქმნება.</entry>
<entrylang="en"key="SETUP_UPGRADE_DESTINATION">The VeraCrypt program files will be upgraded in the location where VeraCrypt is installed. If you need to select a different location, please uninstall VeraCrypt first.</entry>
<entrylang="ka"key="AFTER_UPGRADE_RELEASE_NOTES">გსურთ იხილოთ VeraCrypt-ის მიმდინარე ვერსიის ანოტაცია?</entry>
<entrylang="en"key="SETUP_ADMIN">To successfully install/uninstall VeraCrypt, you must have administrator privileges. Do you want to continue?</entry>
<entrylang="en"key="TC_INSTALLER_IS_RUNNING">VeraCrypt Installer is currently running on this system and performing or preparing installation or update of VeraCrypt. Before you proceed, please wait for it to finish or close it. If you cannot close it, please restart your computer before proceeding.</entry>
<entrylang="ka"key="INSTALL_OK">პროგრამა VeraCrypt წარმატებით ინსტალირებულია.</entry>
<entrylang="en"key="SETUP_UPDATE_OK">VeraCrypt has been successfully updated.</entry>
<entrylang="en"key="UPGRADE_OK_REBOOT_REQUIRED">VeraCrypt has been successfully upgraded. However, before you can start using it, the computer must be restarted.\n\nDo you want to restart it now?</entry>
<entrylang="en"key="SYS_ENC_UPGRADE_FAILED">Failed to upgrade VeraCrypt!\n\nIMPORTANT: Before you shut down or restart the system, we strongly recommend that you use System Restore (Windows Start menu > All programs > Accessories > System Tools > System Restore) to restore your system to the restore point named 'VeraCrypt installation'. If System Restore is not available, you should try installing the original or the new version of VeraCrypt again before you shut down or restart the system.</entry>
<entrylang="ka"key="UNINSTALL_OK">პროგრამა VeraCrypt წარმატებით დეინსტალირებულია.\n\nდააჭირეთ ღილაკს "მზადაა", რათა წაიშალოს VeraCrypt-ის ინსტალატორი და ფოლდერი %s. ფოლდერი არ წაიშლება, თუ იგი შეიცავს ფაილებს, რომლებიც ინსტალატორის ან VeraCrypt-ის მიერ არაა შექმნილი.</entry>
<entrylang="ka"key="CANT_CREATE_FOLDER">%s' ფოლდერის შექმნა არ მოხდა.</entry>
<entrylang="ka"key="CLOSE_TC_FIRST">VeraCrypt-ის დრაივერის ამოტვირთვა შეუძლებელია.\n\nდახურეთ VeraCrypt-ის ყველა გახსნილი ფანჯარა. თუ შედეგი არ არის, გადატვირთეთ Windows და სცადეთ ხელახლა.</entry>
<entrylang="ka"key="DISMOUNT_ALL_FIRST">ინსტალაციის გაგრძელებამდე, საჭიროა VeraCrypt-ის ყველა მიერთებული ტომის გამოერთება.</entry>
<entrylang="en"key="UNINSTALL_OLD_VERSION_FIRST">An obsolete version of VeraCrypt is currently installed on this system. It needs to be uninstalled before you can install this new version of VeraCrypt.\n\nAs soon as you close this message box, the uninstaller of the old version will be launched. Note that no volume will be decrypted when you uninstall VeraCrypt. After you uninstall the old version of VeraCrypt, run the installer of the new version of VeraCrypt again.</entry>
<entrylang="ka"key="REG_INSTALL_FAILED">შეცდომა რეესტრში ელემენტების რეგისტრაციისას</entry>
<entrylang="ka"key="DRIVER_INSTALL_FAILED">შეცდომა მოწყობილობის დრაივერის ინსტალაციისას. გადატვირთეთ Windows და სცადეთ VeraCrypt-ის ინსტალაცია ხელახლა.</entry>
<entrylang="ka"key="DRIVER_UINSTALL_FAILED">მოწყობილობის დრაივერის დეინსტალაცია ჩაიშალა. პროცესის გაგრძელებამდე შესაძლოა საჭირო გახდეს Windows-იდან გამოსვლა ან/და სისტემის გადატვირთვა.</entry>
<entrylang="ka"key="COM_REG_FAILED">შეცდომა მომხმარებლის ანგარიშების მართვის (User Account Control) დამხმარე ბიბლიოთეკის რეგისტრაციისას.</entry>
<entrylang="ka"key="COM_DEREG_FAILED">შეცდომა მომხმარებლის ანგარიშების მართვის (User Account Control) დამხმარე ბიბლიოთეკის რეგისტრაციის უარყოფისას.</entry>
<entrylang="en"key="TRAVELER_LIMITATIONS_NOTE">Note about portable mode:\n\nPlease note that the operating system requires drivers to be registered with it before they can be started. Hence, the VeraCrypt driver is not (and cannot be) fully portable (whereas the VeraCrypt applications are fully portable, i.e. they do not have to be installed or registered with the operating system). Also note that VeraCrypt needs a driver to provide transparent on-the-fly encryption/decryption.</entry>
<entrylang="en"key="TRAVELER_UAC_NOTE">Note that if you decide to run VeraCrypt in portable mode (as opposed to running an installed copy of VeraCrypt), the system will ask you for permission to run VeraCrypt (UAC prompt) every time you attempt to run it.\n\nThe reason is that when you run VeraCrypt in portable mode, VeraCrypt needs to load and start the VeraCrypt device driver. VeraCrypt needs a device driver to provide transparent on-the-fly encryption/decryption, and users without administrator privileges cannot start device drivers in Windows. Therefore, the system will ask you for permission to run VeraCrypt with administrator privileges (UAC prompt).\n\nNote that if you install VeraCrypt on the system (as opposed to running VeraCrypt in portable mode), the system will NOT ask you for permission to run VeraCrypt (UAC prompt) every time you attempt to run it.\n\nAre you sure you want to extract the files?</entry>
<entrylang="en"key="CONTAINER_ADMIN_WARNING">Warning: This instance of the Volume Creation Wizard has administrator privileges.\n\nYour new volume may be created with permissions that will not allow you to write to the volume when it is mounted. If you want to avoid that, close this instance of the Volume Creation Wizard and launch a new one without administrator privileges.\n\nDo you want to close this instance of the Volume Creation Wizard?</entry>
<entrylang="ka"key="CANNOT_DISPLAY_LICENSE">შეცდომა: ლიცენზიის ჩვენება არ ხერხდება.</entry>
<entrylang="en"key="SYS_FAVORITE_VOLUMES_SAVED">System favorite volumes saved.\n\nTo enable mounting of system favorite volumes when the system starts, please select 'Settings' > 'System Favorite Volumes' > 'Mount system favorite volumes when Windows starts'.</entry>
<entrylang="en"key="FAVORITE_ADD_DRIVE_DEV_WARNING">The volume you are adding to favorites is neither a partition nor a dynamic volume. Therefore, VeraCrypt will be unable to mount this favorite volume if the device number changes.</entry>
<entrylang="en"key="FAVORITE_ADD_PARTITION_TYPE_WARNING">The volume you are adding to favorites is a partition not recognized by Windows.\n\nVeraCrypt will be unable to mount this favorite volume if the device number changes. Please set the type of the partition to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then add the partition to favorites again.</entry>
<entrylang="en"key="FAVORITE_ARRIVAL_MOUNT_BACKGROUND_TASK_ERR">VeraCrypt Background Task is disabled or it is configured to exit when there are no mounted volumes (or VeraCrypt is running in portable mode). This may prevent your favorite volumes from being automatically mounted when devices hosting them get connected.\n\nNote: To enable the VeraCrypt Background Task, select Settings > Preferences and check the 'Enabled' checkbox in the section 'VeraCrypt Background Task'.</entry>
<entrylang="en"key="FAVORITE_ARRIVAL_MOUNT_NETWORK_PATH_ERR">A container stored in a remote filesystem shared over a network cannot be automatically mounted when its host device gets connected.</entry>
<entrylang="en"key="FAVORITE_ARRIVAL_MOUNT_DEVICE_PATH_ERR">The device displayed below is neither a partition nor a dynamic volume. Therefore, the volume hosted on the device cannot be automatically mounted when the device gets connected.</entry>
<entrylang="en"key="FAVORITE_ARRIVAL_MOUNT_PARTITION_TYPE_ERR">Please set the type of the partition displayed below to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then remove the partition from favorites and add it again. This will enable the volume hosted on the device to be automatically mounted when the device gets connected.</entry>
<entrylang="en"key="FAVORITE_LABEL_DEVICE_PATH_ERR">The device displayed below is neither a partition nor a dynamic volume. Therefore, no label can be assigned to it.</entry>
<entrylang="en"key="FAVORITE_LABEL_PARTITION_TYPE_ERR">Please set the type of the partition displayed below to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then remove the partition from favorites and add it again. This will enable VeraCrypt to assign a label to the partition.</entry>
<entrylang="en"key="SYSTEM_FAVORITE_NETWORK_PATH_ERR">Due to a Windows limitation, a container stored in a remote filesystem shared over a network cannot be mounted as a system favorite volume (however, it can be mounted as a non-system favorite volume when a user logs on).</entry>
<entrylang="en"key="KEYFILE_EMPTY_BASE_NAME">Please enter a name for the keyfile(s) to be generated</entry>
<entrylang="en"key="KEYFILE_INVALID_BASE_NAME">The base name of the keyfile(s) is invalid</entry>
<entrylang="en"key="KEYFILE_ALREADY_EXISTS">The keyfile '%s' already exists.\nDo you want to overwrite it? The generation process will be stopped if you answer No.</entry>
<entrylang="en"key="HEADER_DAMAGED_AUTO_USED_HEADER_BAK">WARNING: The header of this volume is damaged! VeraCrypt automatically used the backup of the volume header embedded in the volume.\n\nYou should repair the volume header by selecting 'Tools' > 'Restore Volume Header'.</entry>
<entrylang="ka"key="VOL_HEADER_BACKED_UP">ტომის სათაურის სარეზერვო ასლი წარმატებით შეიქმნა.\n\nმნიშვნელოვანია: ამ ასლიდან სათაურის აღდგენისას ასევე აღდგება ტომის მიმდინარე პაროლი. მეტიც, თუ ტომის მიერთებისას გამოიყენება გასაღების ფაილები, მაშინ სათაურის აღდგენის შემდეგ ტომის მისაერთებლად საჭირო იქნება იგივე გასაღების ფაილები.\n\nყურადღება: სათაურის ეს ასლი შეიძლება გამოყენებულ იქნას მხოლოდ ამ კონკრეტული ტომისათვის. სხვა ტომისათვის ამ ასლის გამოყენების შემდეგ ტომის მიერთება შესაძლებელი იქნება, მაგრამ ტომიდან რაიმე მონაცემის წაკითხვა - შეუძლებელი (რადგან შეიცვლება მისი გასაღები).</entry>
<entrylang="ka"key="VOL_HEADER_RESTORED">ტომის სათაური წარმატებით აღდგა.\n\nმნიშვნელოვანია: გაიტვალისწინეთ, რომ სათაურის აღდგენით შესაძლოა აღდგა ძველი პაროლიც. მეტიც, თუ ტომის მიერთებისას გამოიყენება გასაღების ფაილები, მაშინ სათაურის აღდგენის შემდეგ ტომის მისაერთებლად საჭირო იქნება იგივე გასაღების ფაილები</entry>
<entrylang="en"key="EXTERNAL_VOL_HEADER_BAK_FIRST_INFO">For security reasons, you will have to enter the correct password (and/or supply the correct keyfiles) for the volume.\n\nNote: If the volume contains a hidden volume, you will have to enter the correct password (and/or supply the correct keyfiles) for the outer volume first. Afterwards, if you choose to back up the header of the hidden volume, you will have to enter the correct password (and/or supply the correct keyfiles) for the hidden volume.</entry>
<entrylang="en"key="CONFIRM_VOL_HEADER_BAK">Are you sure you want to create volume header backup for %s?\n\nAfter you click Yes, you will prompted for a filename for the header backup.\n\nNote: Both the standard and the hidden volume headers will be re-encrypted using a new salt and stored in the backup file. If there is no hidden volume within this volume, the area reserved for the hidden volume header in the backup file will be filled with random data (to preserve plausible deniability). When restoring a volume header from the backup file, you will need to enter the correct password (and/or to supply the correct keyfiles) that was/were valid when the volume header backup was created. The password (and/or keyfiles) will also automatically determine the type of the volume header to restore, i.e. standard or hidden (note that VeraCrypt determines the type through the process of trial and error).</entry>
<entrylang="ka"key="CONFIRM_VOL_HEADER_RESTORE">ნამდვილად გსურთ %s ტომის სათაურის აღდგენა?\n\nყურადღება: სათაურის აღდგენისას ასევე აღდგება პაროლი, რომელიც მოქმედებდა სარეზერვო ასლის შენახვის დროს. მეტიც, თუ ტომის მიერთებისას გამოიყენება გასაღების ფაილები, მაშინ სათაურის აღდგენის შემდეგ ტომის მისაერთებლად საჭირო იქნება იგივე გასაღების ფაილები.\n\nდააჭირეთ "დიახ"-ს, რათა აირჩიოთ სათაურის სარეზერვო ასლის ფაილი.</entry>
<entrylang="en"key="DOES_VOLUME_CONTAIN_HIDDEN">Does the volume contain a hidden volume?</entry>
<entrylang="en"key="VOLUME_CONTAINS_HIDDEN">The volume contains a hidden volume</entry>
<entrylang="en"key="VOLUME_DOES_NOT_CONTAIN_HIDDEN">The volume does not contain a hidden volume</entry>
<entrylang="en"key="HEADER_RESTORE_EXTERNAL_INTERNAL">Please select the type of volume header backup you want to use:</entry>
<entrylang="en"key="HEADER_RESTORE_INTERNAL">Restore the volume header from the backup embedded in the volume</entry>
<entrylang="en"key="HEADER_RESTORE_EXTERNAL">Restore the volume header from an external backup file</entry>
<entrylang="en"key="HEADER_BACKUP_SIZE_INCORRECT">The size of the volume header backup file is incorrect.</entry>
<entrylang="en"key="VOLUME_HAS_NO_BACKUP_HEADER">There is no backup header embedded in this volume (note that only volumes created by TrueCrypt 6.0 or later contain embedded backup headers).</entry>
<entrylang="ka"key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">თქვენ ცდილობთ სისტემური განაყოფის/მოწყობილობის სათაურის რეზერვირებას. ეს არ არის ნებადართული. სისტემური დისკის რეზევირება/აღდგენის ოპერაციები შიძლება განხორციელდეს მხოლოდ VeraCrypt-ის აღმდგენი დისკის გამოყენებით.\n\nგსურთ VeraCrypt-ის აღმდგენი დისკის შექმნა?</entry>
<entrylang="ka"key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">თქვენ ცდილობთ VeraCrypt-ის ვირტუალური ტომის სათაურის აღდგენას, მაგრამ არჩეულია სისტემური განაყოფი/მოწყობილობა. ეს არ არის ნებადართული. სისტემური დისკის რეზევირება/აღდგენის ოპერაციები შიძლება განხორციელდეს მხოლოდ VeraCrypt-ის აღმდგენი დისკის გამოყენებით.\n\nგსურთ VeraCrypt-ის აღმდგენი დისკის შექმნა?</entry>
<entrylang="ka"key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">OK-ის დაწკაპების შემდეგ აირჩიეთ VeraCrypt-ის ახალი აღმდგენი დისკის ISO ფაილის სახელი და მისამართი.</entry>
<entrylang="en"key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' > 'Verify Rescue Disk' to verify that it has been correctly burned.</entry>
<entrylang="en"key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' > 'Verify Rescue Disk' to verify that it has been correctly burned.</entry>
<entrylang="ka"key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">მოათავსეთ VeraCrypt-ის აღმდგენი დისკი CD/DVD მოწყობილობაში და დაწკაპეთ OK.</entry>
<entrylang="ka"key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">VeraCrypt-ის აღმდგენი დისკი წარმატებით შემოწმდა.</entry>
<entrylang="ka"key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">აღმდგენი დისკის ჩაწერის სისწორის შემოწმება ვერ მოხერხდა.\n\nთუ აღმდგენი დისკი ჩაწერილია, დისკი გამოიღეთ და ხელახლა ჩადეთ CD/DVD მოწყობილობაში. თუ ეს არ შველის, მაშინ გამოიყენეთ სხვა დისკი ან/და სხვა ჩამწერი პროგრამა.\n\nთუ ამოწმებთ სხვა მთავარი გასაღებისათვის, მარილისათვის და ა.შ. შექმნილ აღმდგენ დისკს, შემოწმება ყოველთვის მცდარ შედეგს აჩვენებს. მიმდინარე კონფიგურაციის თავსებადი აღმდგენი დისკის შექმნისათვის, აირჩიეთ სისტემა>აღმდგენი დისკის შექმნა.</entry>
<entrylang="en"key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</entry>
<entrylang="en"key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</entry>
<entrylang="ka"key="ERROR_CREATING_RESCUE_DISK">VeraCrypt-ის აღმდგენი დისკის Rescue Disk.</entry>
<entrylang="en"key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a VeraCrypt Rescue Disk, boot the decoy operating system and then select 'System' > 'Create Rescue Disk'.</entry>
<entrylang="en"key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</entry>
<entrylang="en"key="RESCUE_DISK_CHECK_FAILED_SENTENCE_APPENDIX"> and/or other CD/DVD recording software</entry>
<entrylang="en"key="SYSTEM_FAVORITES_DLG_TITLE">VeraCrypt - System Favorite Volumes</entry>
<entrylang="en"key="SYS_FAVORITES_HELP_LINK">What are system favorite volumes?</entry>
<entrylang="en"key="SYS_FAVORITES_REQUIRE_PBA">The system partition/drive does not appear to be encrypted.\n\nSystem favorite volumes can be mounted using only a pre-boot authentication password. Therefore, to enable use of system favorite volumes, you need to encrypt the system partition/drive first.</entry>
<entrylang="ka"key="UNSUPPORTED_CHARS_IN_PWD">შეცდომა! პაროლი უნდა შეიცავდეს მხოლოდ სტანდარტულ ASCII სიმბოლოებს.\n\nარა-ASCII სიმბოლოების გამოყენება შეუძლებელს გახდის ტომის მიერთებას, თუ სისტემის კონფიგურაცია შეიცვლება.\n\nნებადართულია შემდეგი სიმბოლოების გამოყენება:\n\n ! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ \\ ] ^ _ ` a b c d e f g h i j k l m n o p q r s t u v w x y z { | } ~</entry>
<entrylang="ka"key="UNSUPPORTED_CHARS_IN_PWD_RECOM">ყურადღება! პაროლი შეიცავს არა-ASCII სიმბოლოებს. ეს შეუძლებელს გახდის ტომის მიერთებას, თუ სისტემის კონფიგურაცია შეიცვლება..\n\nშეცვალეთ ყველა არა-ASCII სიმბოლო ASCII სიმბოლოებით.\n\nASCII სიმბოლოებია:\n\n ! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ \\ ] ^ _ ` a b c d e f g h i j k l m n o p q r s t u v w x y z { | } ~</entry>
<entrylang="en"key="EXE_FILE_EXTENSION_CONFIRM">WARNING: We strongly recommend that you avoid file extensions that are used for executable files (such as .exe, .sys, or .dll) and other similarly problematic file extensions. Using such file extensions causes Windows and antivirus software to interfere with the container, which adversely affects the performance of the volume and may also cause other serious problems.\n\nWe strongly recommend that you remove the file extension or change it (e.g., to '.hc').\n\nAre you sure you want to use the problematic file extension?</entry>
<entrylang="en"key="EXE_FILE_EXTENSION_MOUNT_WARNING">WARNING: This container has a file extension that is used for executable files (such as .exe, .sys, or .dll) or some other file extension that is similarly problematic. It will very likely cause Windows and antivirus software to interfere with the container, which will adversely affect the performance of the volume and may also cause other serious problems.\n\nWe strongly recommend that you remove the file extension of the container or change it (e.g., to '.hc') after you dismount the volume.</entry>
<entrylang="ka"key="HOMEPAGE">ვებ-გვერდი</entry>
<entrylang="ka"key="LARGE_IDE_WARNING_XP">ყურადღება: სისტემაში არ არის ინსტალირებული Windows-ის არცერთი განახლების პაკეტი (Service Pack).თუ Windows XP-ზე არ არის ინსტალირებული Service Pack 1 (ან უფრო ახალი), 128გბ-ზე მეტი მოცულობის IDE დისკებზე ჩაწერა არ არის რეკომენდებული, რადგან ეს გამოიწვევს მონაცემთა დაზიანებას (მიუხედავად იმისა, ეხება ეს VeraCrypt-ის ტომს თუ არა). ეს Windows-ის შეზღუდვაა და არა შეცდომა VeraCrypt-ში.</entry>
<entrylang="ka"key="LARGE_IDE_WARNING_2K">ყურადღება: სისტემაში არ არის ინსტალირებულიWindows-ის განახლების პაკეტი Service Pack 3 (ან ახალი). თუ Windows 2000-ზე არ არის ინსტალირებულია Service Pack 3 (ან ახალი), 128გბ-ზე მეტი მოცულობის IDE დისკებზე ჩაწერა არ არის რეკომენდებული, რადგან ეს გამოიწვევს მონაცემთა დაზიანებას (მიუხედავად იმისა, ეხება ეს VeraCrypt-ის ტომს თუ არა). ეს Windows-ის შეზღუდვაა და არა შეცდომა VeraCrypt-ში. ამის გარდა, შესაძლოა საჭირო გახდეს რეესტრში LBA-ს 48 ბიტიანი ადრესაციის მხარდაჭერის ჩართვა; დაწვრილებით იხ. http://support.microsoft.com/kb/305098/EN-US</entry>
<entrylang="ka"key="LARGE_IDE_WARNING_2K_REGISTRY">ყურადღება: 48-bit LBA ATAPI-ის მხარდაჭერა სისტემაში გამორთულია. შესაბსამისად,128გბ-ზე მეტი მოცულობის IDE დისკებზე ჩაწერა არ შეიძლება! წინააღმდეგ შემთხვევაში შესაძლებელია მონაცემთა დაზიანება. ეს Windows-ის შეზღუდვაა და არა შეცდომა VeraCrypt-ში.\n\n48-ბიტიანი LBA მხარდაჭერის დამატებისათვის, რეგიტრში მისამართზე HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\atapi\\Parameters ჩაამატეთ მნიშვნელობა "EnableBigLba" და მიანიჭეთ 1.\n\nდამატებით იხ. http://support.microsoft.com/kb/305098</entry>
<entrylang="en"key="VOLUME_TOO_LARGE_FOR_FAT32">Error: Files larger than 4 GB cannot be stored on a FAT32 file system. Therefore, file-hosted VeraCrypt volumes (containers) stored on a FAT32 file system cannot be larger than 4 GB.\n\nIf you need a larger volume, create it on an NTFS file system (or, if you use Windows Vista SP1 or later, on an exFAT file system) or, instead of creating a file-hosted volume, encrypt an entire partition or device.</entry>
<entrylang="en"key="VOLUME_TOO_LARGE_FOR_WINXP">Warning: Windows XP does not support files larger than 2048 GB (it will report that "Not enough storage is available"). Therefore, you cannot create a file-hosted VeraCrypt volume (container) larger than 2048 GB under Windows XP.\n\nNote that it is still possible to encrypt the entire drive or create a partition-hosted VeraCrypt volume larger than 2048 GB under Windows XP.</entry>
<entrylang="ka"key="FREE_SPACE_FOR_WRITING_TO_OUTER_VOLUME">ყურადღება: თუ მომავალში დაგჭირდებათ გარე ტომში მონაცემების/ფაილების დამატება, წინასწარ იზრუნეთ მასში არსებული ფარული ტომის ზომის შემცირებაზე.\n\nგსურთ გააგრძელოთ და გამოიყენოთ თქვენს მიერ მითითებული ზომა?</entry>
<entrylang="ka"key="NO_VOLUME_SELECTED">ტომი არ არის არჩეული.\n\nდააჭირეთ ღილაკს "მოწყობილობა" ან "ფაილი" და აირჩიეთ VeraCrypt-ის ტომი.</entry>
<entrylang="ka"key="NO_SYSENC_PARTITION_SELECTED">ასარჩევია განაყოფი.\n\nდაწკაპეთ "აირჩიეთ მოწყობილობა" განაყოფის ასარჩევად, რომელიც ჩატვირთვისწინა აუთენტიფიკაციას მოითხოვს (მაგ. დაშიფრულ სისტემურ დისკზე მოთავსებული განაყოფი, ოპერაციული სისტემით, რომელიც არ მუშაობს).\n\nშენიშვნა: ეს განაყოფი მიერთდება, როგორც ჩვეულებრივი VeraCrypt-ის ტომი, ჩატვირთვისწინა აუთენტიფიკაციის გარეშე. ეს გამოსადეგია მაგ. რეზერვირების ან აღდგენის ოპერაციებისათვის.</entry>
<entrylang="ka"key="CONFIRM_SAVE_DEFAULT_KEYFILES">გაფრთხილება: თუ საწყისი გასაღების ფაილები დანიშნულია, იმ ტომების მიერთება, რომლებიც არ იყენებენ ასეთ ფაილებს, შეუძლებელი იქნება. ამიტომ, საწყისი გასაღების ფაილების დანიშვნის შემდეგ, არ დაგავიწყდეთ, ასეთი ტომის ყოველი მიერთებისას გამორთოთ ოფცია "გამოიყენე გასაღების ფაილი' (პაროლის ველის ქვემოთ).\n\nნამდვილად გსურთ დანიშნოთ მითითებული გასაღების ფაილები საწყისად?</entry>
<entrylang="ka"key="CANNOT_USE_RESERVED_KEY">შეცდომა! ეს "ცხელი კლავიში" რეზერვირებულია. აირჩიეთ სხვა.</entry>
<entrylang="ka"key="SHORTCUT_ALREADY_IN_USE">შეცდომა! ეს "ცხელი კლავიში" უკვე გამოიყენება.</entry>
<entrylang="ka"key="HOTKEY_REGISTRATION_ERROR">ყურადღება: ზოგიერთი საერთოსისტემური "ცხელი კლავიშები" VeraCrypt-ში არ იმუშავებს!\n\nშეამოწმეთ, ხომ არ გამოიყენება ეს კომბინაცია ოპერაციული სისტემის ან სხვა პროგრამების მიერ.</entry>
<entrylang="en"key="PAGING_FILE_CREATION_PREVENTED">Paging file creation has been prevented.\n\nPlease note that, due to Windows issues, paging files cannot be located on non-system VeraCrypt volumes (including system favorite volumes). VeraCrypt supports creation of paging files only on an encrypted system partition/drive.</entry>
<entrylang="en"key="SYS_ENC_HIBERNATION_PREVENTED">An error or incompatibility prevents VeraCrypt from encrypting the hibernation file. Therefore, hibernation has been prevented.\n\nNote: When a computer hibernates (or enters a power-saving mode), the content of its system memory is written to a hibernation storage file residing on the system drive. VeraCrypt would not be able to prevent encryption keys and the contents of sensitive files opened in RAM from being saved unencrypted to the hibernation storage file.</entry>
<entrylang="en"key="HIDDEN_OS_HIBERNATION_PREVENTED">Hibernation has been prevented.\n\nVeraCrypt does not support hibernation on hidden operating systems that use an extra boot partition. Please note that the boot partition is shared by both the decoy and the hidden system. Therefore, in order to prevent data leaks and problems while resuming from hibernation, VeraCrypt has to prevent the hidden system from writing to the shared boot partition and from hibernating.</entry>
<entrylang="en"key="VOLUME_MOUNTED_AS_DRIVE_LETTER_X_DISMOUNTED">VeraCrypt volume mounted as %c: has been dismounted.</entry>
<entrylang="en"key="MOUNTED_VOLUMES_DISMOUNTED">VeraCrypt volumes have been dismounted.</entry>
<entrylang="en"key="VOLUMES_DISMOUNTED_CACHE_WIPED">VeraCrypt volumes have been dismounted and password cache has been wiped.</entry>
<entrylang="en"key="CONFIRM_BACKGROUND_TASK_DISABLED">WARNING: If the VeraCrypt Background Task is disabled, the following functions will be disabled:\n\n1) Hot keys\n2) Auto-dismount (e.g., upon logoff, inadvertent host device removal, time-out, etc.)\n3) Auto-mount of favorite volumes\n4) Notifications (e.g., when damage to hidden volume is prevented)\n5) Tray icon\n\nNote: You can shut down the Background Task anytime by right-clicking the VeraCrypt tray icon and selecting 'Exit'.\n\nAre you sure you want to permanently disable the VeraCrypt Background Task?</entry>
<entrylang="ka"key="CONFIRM_NO_FORCED_AUTODISMOUNT">ყურადღება: თუ ეს ოპცია გამორთულია, ტომების, რომლებიც გახსნილ ფაილებს/ფოლდერებს შეიცავენ, აუტოგამოერთება არ მოხდება.\n\nნამდვილად გსურთ ამ ოპციის გამორთვა?</entry>
<entrylang="ka"key="WARN_PREF_AUTO_DISMOUNT">ყურადღება: ტომების, რომლებიც გახსნილ ფაილებს/ფოლდერებს შეიცავენ, აუტოგამოერთება არ მოხდება.\n\nამის თავიდან ასაცილებლად, ჩართეთ შესაბამისი ოფცია მენიუში"</entry>
<entrylang="en"key="WARN_PREF_AUTO_DISMOUNT_ON_POWER">WARNING: When the notebook battery power is low, Windows may omit sending the appropriate messages to running applications when the computer is entering power saving mode. Therefore, VeraCrypt may fail to auto-dismount volumes in such cases.</entry>
<entrylang="en"key="NONSYS_INPLACE_ENC_RESUME_PROMPT">You have scheduled the process of encryption of a partition/volume. The process has not been completed yet.\n\nDo you want to resume the process now?</entry>
<entrylang="ka"key="SYSTEM_ENCRYPTION_RESUME_PROMPT">თქვენ დაგეგმილი გაქვთ სისტემური განაოფის/მოწყობილობის შიფრაცია/დეშიფრაცია. ეს პროცესი ჯერ არ დასრულებულა.\n\nგსურთ ამ პროცესის დაწყება (გაგრძელება) ახლავე?</entry>
<entrylang="en"key="ASK_NONSYS_INPLACE_ENC_NOTIFICATION_REMOVAL">Do you want to be prompted about whether you want to resume the currently scheduled processes of encryption of non-system partitions/volumes?</entry>
<entrylang="en"key="DO_NOT_PROMPT_ME">No, do not prompt me</entry>
<entrylang="en"key="NONSYS_INPLACE_ENC_NOTIFICATION_REMOVAL_NOTE">IMPORTANT: Keep in mind that you can resume the process of encryption of any non-system partition/volume by selecting 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main VeraCrypt window.</entry>
<entrylang="ka"key="SYSTEM_ENCRYPTION_SCHEDULED_BUT_PBA_FAILED">თქვენ დაგეგმილი გაქვთ სისტემური განაყოფის/დისკის შიფრაცია ან დეშიფრაცია. თუმცა ჩატვირთვისწინა აუთენტიფიკაცია ჩაიშალა ან არ გამოიტოვა.\n\nშენიშვნა: თუ ჩატვირთვის დროს სისტემურ განაყოფს/დისკს დეშიფრაცია გაუკეთეთ, მაშინ დაასრულეთ პროცესი - აირჩიეთ მენიუში "სისტემა">"სისტემური განაყოფის/დისკის სამუდამო დეშიფრაცია".</entry>
<entrylang="en"key="CONFIRM_EXIT">WARNING: If VeraCrypt exits now, the following functions will be disabled:\n\n1) Hot keys\n2) Auto-dismount (e.g., upon logoff, inadvertent host device removal, time-out, etc.)\n3) Auto-mount of favorite volumes\n4) Notifications (e.g., when damage to hidden volume is prevented)\n\nNote: If you do not wish VeraCrypt to run in the background, disable the VeraCrypt Background Task in the Preferences (and, if necessary, disable the automatic start of VeraCrypt in the Preferences).\n\nAre you sure you want VeraCrypt to exit?</entry>
<entrylang="ka"key="CHOOSE_ENCRYPT_OR_DECRYPT">VeraCrypt არ აქვს საკმარისი ინფორმაცია, შეასრულოს შიფრაციის თუ დეშიფრაციის ოპერაცია.</entry>
<entrylang="ka"key="CHOOSE_ENCRYPT_OR_DECRYPT_FINALIZE_DECRYPT_NOTE">VeraCrypt ვერ წყვეტს რა შეასრულოს, შიფრაცია თუ დეშიფრაცია.\n\nშენიშვნა: თუ ჩატვირთვის დროს სისტემურ განაყოფს/დისკს დეშიფრაცია გაუკეთეთ, მასინ დაასრულეთ პროცესი - დაწკაპეთ "დეშიფრაცია".</entry>
<entrylang="en"key="NONSYS_INPLACE_ENC_REVERSE_INFO">Note: When you are encrypting a non-system partition/volume in place and an error persistently prevents you from finishing the process, you will not be able to mount the volume (and access data stored on it) until you entirely DECRYPT the volume (i.e. reverse the process).\n\nIf you need to do so, follow these steps:\n1) Exit this wizard.\n2) In the main VeraCrypt window, select 'Volumes' > 'Resume Interrupted Process'.\n3) Select 'Decrypt'.</entry>
<entrylang="en"key="NONSYS_INPLACE_ENC_DEFER_CONFIRM">Do you want to interrupt and postpone the process of encryption of the partition/volume?\n\nNote: Keep in mind that the volume cannot be mounted until it has been fully encrypted. You will be able to resume the process of encryption and it will continue from the point it was stopped. You can do so, for example, by selecting 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main VeraCrypt window.</entry>
<entrylang="ka"key="SYSTEM_ENCRYPTION_DEFER_CONFIRM">გსურთ შეწყვითოთ და გადადოთ სისტემური განაყოფის/მოწყობილობის შიფრაციის პროცესი?\n\nმომავალში შესაძლებლობა გექქნებათ შეწყვეტილი მომენტიდან გააგრძელოთ ეს პროცესი. ეს შეგიძლიათ გააკეთოთ შემდეგნაირად: აირჩიეთ მენიუდან სისტემა>შეწყვეტილი პროცესის გაგრძელება. თუ სამუდამოდ გსურთ შეწყვიტოთ ან უკუაგდოთ შიფრაციის პროცესი, აირჩიეთ სისტემა>სისტემური განაყოფის/მოწყობილობის სამუდამოდ დეშიფრაცია.</entry>
<entrylang="ka"key="SYSTEM_DECRYPTION_DEFER_CONFIRM">გსურთ შეწყვითოთ და გადადოთ სისტემური განაყოფის/მოწყობილობის დეშიფრაციის პროცესი?\n\nმომავალში შესაძლებლობა გექქნებათ შეწყვეტილი მომენტიდან გააგრძელოთ ეს პროცესი. ეს შეგიძლიათ გააკეთოთ შემდეგნაირად: აირჩიეთ მენიუდან სისტემა>შეწყვეტილი პროცესის გაგრძელება. თუ გსურთ დეშიფრაციის პროცესის უკან დაბრუნება (და შიფრაციის დაწყება), აირჩიეთ სისტემა>სისტემური განაყოფის/მოწყობილობის შიფრაცია.</entry>
<entrylang="ka"key="FAILED_TO_INTERRUPT_SYSTEM_ENCRYPTION">შეცდომა: სისტემური განაყოფის/მოწყობილობის შიფრაცია/დეშიფრაციის პროცესის შეწყვეტა შეუძლებელია.</entry>
<entrylang="en"key="FAILED_TO_INTERRUPT_WIPING">Error: Failed to interrupt the process of wiping.</entry>
<entrylang="ka"key="FAILED_TO_RESUME_SYSTEM_ENCRYPTION">შეცდომა: სისტემური განაყოფის/მოწყობილობის შიფრაცია/დეშიფრაციის პროცესის გაგრძელება შეუძლებელია.</entry>
<entrylang="en"key="FAILED_TO_START_WIPING">Error: Failed to start the process of wiping.</entry>
<entrylang="ka"key="INCONSISTENCY_RESOLVED">გაუმართაობა აღმოფხვრილია.\n\n\n(თუ გამოგზავნით ამ შეცდომასთან დაკავშირებით ინფორმაციას, დაურთეთ შემდეგი ტექნიკური ინფორმაცია: %hs)</entry>
<entrylang="en"key="UNEXPECTED_STATE">Error: Unexpected state.\n\n\n(If you report a bug in connection with this, please include the following technical information in the bug report:\n%hs)</entry>
<entrylang="en"key="NO_SYS_ENC_PROCESS_TO_RESUME">There is no interrupted process of encryption/decryption of the system partition/drive to resume.\n\nNote: If you want to resume an interrupted process of encryption/decryption of a non-system partition/volume, select 'Volumes' > 'Resume Interrupted Process'.</entry>
<entrylang="ka"key="HIDVOL_PROT_BKG_TASK_WARNING">ყურადღება: VeraCrypt-ის ფონური რეჟიმი გამორთულია. VeraCrypt-ის დახურვის შემდეგ, იგი არ შეგატყობინებთ ფარული ტომის დაზიანების შემთხვევაზე.\n\nგსურთ ჩართოთ VeraCrypt-ის ფონური რეჟიმი?</entry>
<entrylang="ka"key="CHECKING_FS">მიმდინარეობს %s-ად მიერთებული ტომის ფაილური სისტემის შემოწმება...</entry>
<entrylang="ka"key="REPAIRING_FS">მიმდინარეობს %s-ად მიერთებული ტომის ფაილური სისტემის აღდგენა...</entry>
<entrylang="ka"key="WARN_64_BIT_BLOCK_CIPHER">ყურადღება: ეს ტომი დაშიფრულია 64-ბიტი ბლოკიანი შიფრაციის ალგორითმით.\n\n64-ბიტი ბლოკიანი დაშიფრვის ალგორითმები (Blowfish, CAST-128, and Triple DES) მოძველებულია. ამ ტომის მიერთება VeraCrypt 5.0-ით ან შემდგომი ვერსიებით შეუძლებელია. რეკომენდებულია შექმნათ VeraCrypt-ის ახალი ტომი 128 ბიტი ბლოკიანი სიფრაციის ალგორითმით (მაგ. AES, Serpent, Twofish) და შემდეგ გადაიტანოთ ამ ტომიდან ფაილები ახალ ტომში.</entry>
<entrylang="ka"key="SYS_AUTOMOUNT_DISABLED">სისტემა არაა კონფიგურირებული ახალი ტომების ავტომიერთებისათვის. მოწყობილობის ბაზაზე არსებული ტომების მიერთება შესაძლოა ვერ მოხდეს. ავტომიერთების ჩართვა შეიძლება შემდეგი ბრძანების შესრულებით და სისტემის გადატვირთვით.\n\nmountvol.exe /E</entry>
<entrylang="ka"key="SYS_ASSIGN_DRIVE_LETTER">გთხოვთ განაყოფს/მოწყობილობას მიანიჭოთ დისკის ასო (Control Panel>System and Maintenance>Administrative Tools - Create and format hard disk partitions).\n\nგაითვალისწინეთ, რომ ეს ოპერაციული სისტემის მოთხოვნაა.</entry>
<entrylang="ka"key="MOUNT_TC_VOLUME">VeraCrypt-ის ტომის მიერთება</entry>
<entrylang="ka"key="DISMOUNT_ALL_TC_VOLUMES">VeraCrypt-ის ყველა ტომის გამოერთება</entry>
<entrylang="ka"key="UAC_INIT_ERROR"> VeraCrypt-მა ვერ მოიპოვა ადმინისტრატორის პრივილეგიები.</entry>
<entrylang="ka"key="ERR_ACCESS_DENIED">ოპერაციულ სისტემასთან წვდომა არ არის.\n\nშესაძლო მიზეზებია: ოპერაციული სისტემა მოითხოვს, რომ გქონდეთ ჩაწერა/წაკითხვის უფლებები (ან ადმინისტრატორის პრივილეგიები) გარკვეულ ფოლდერებზე, ფაილებზედა მოწყობილობებზე, რათა წაიკითხოთ/ჩაწეროთ მათზე. ჩვეულებრივ, მომხმარებელს (ადმინისტრატორის პრივილეგიების გარეშე) უფლება აქვს წაიკითხოს, შექმნას და ჩაწეროს საკუთარ My Documents ფოლდერში.</entry>
<entrylang="en"key="SECTOR_SIZE_UNSUPPORTED">Error: The drive uses an unsupported sector size.\n\nIt is currently not possible to create partition/device-hosted volumes on drives that use sectors larger than 4096 bytes. However, note that you can create file-hosted volumes (containers) on such drives.</entry>
<entrylang="en"key="SYSENC_UNSUPPORTED_SECTOR_SIZE_BIOS">It is currently not possible to encrypt a system installed on a disk that uses a sector size other than 512 bytes.</entry>
<entrylang="ka"key="NO_SPACE_FOR_BOOT_LOADER">VeraCrypt ჩატვირთვის მოდული საჭიროებს მინიმუმ 32კბ თავისუფალ სივრცეს სისტემური დისკის დასაწყისში. სამწუხაროდ, თქვენი დისკი ამ პირობებს ვერ აკმაყოფილებს.\n\nგთხოვთ, ნუ ჩათვლით ამას VeraCrypt-ის შეცდომად. ამ პრობლემის აღმოსაფხვრელად, ხელახლა დაყავიტ თქვენი დისკი და დატოვეთ პირველი 32კბ თავისუფალი სივრცე (როგორც წესი, უბრალოდ წაშალეთ და თავიდან შექმენით პირველი განაყოფი). რეკომენდებულია Microsoft partition manager-ის გამოყენება, რომელიც Windows-ის ინსტალაციის დროს შეგხვდებათ.</entry>
<entrylang="ka"key="FEATURE_UNSUPPORTED_ON_CURRENT_OS">ეს ფუნქცია ამ ოპერაციულ სისტემის ვერსიასთან თავსებადი არ არის.</entry>
<entrylang="ka"key="SYS_ENCRYPTION_UNSUPPORTED_ON_CURRENT_OS">VeraCrypt-ის ეს ვერსიას არ აქვს ამ ოპერაციულ სისტემის ვერსიაში სისტემური განაყოფის/მოწყობილობის შიფრაციის მხარდაჭერა.</entry>
<entrylang="en"key="SYS_ENCRYPTION_UNSUPPORTED_ON_VISTA_SP0">Before you can encrypt the system partition/drive on Windows Vista, you need to install Service Pack 1 or higher for Windows Vista (no such Service Pack has been installed on this system yet).\n\nNote: Service Pack 1 for Windows Vista resolved an issue causing a shortage of free base memory during system boot.</entry>
<entrylang="en"key="SYS_ENCRYPTION_UPGRADE_UNSUPPORTED_ON_VISTA_SP0">VeraCrypt no longer supports encryption of the system partition/drive on Windows Vista with no Service Pack installed. Before upgrading VeraCrypt, please install Service Pack 1 or higher for Windows Vista.</entry>
<entrylang="en"key="FEATURE_REQUIRES_INSTALLATION">Error: This feature requires VeraCrypt to be installed on the system (you are running VeraCrypt in portable mode).\n\nPlease install VeraCrypt and then try again.</entry>
<entrylang="en"key="WINDOWS_NOT_ON_BOOT_DRIVE_ERROR">WARNING: Windows does not appear to be installed on the drive from which it boots. This is not supported.\n\nYou should continue only if you are sure that Windows is installed on the drive from which it boots.\n\nDo you want to continue?</entry>
<entrylang="ka"key="TC_BOOT_LOADER_ALREADY_INSTALLED">VeraCrypt-ის საწყისი ჩამტვირთავი ამ სისტემურ დისკზე უკვე ინსტალირებულია!\n\nშესაძლებელია თქვენს სისტემაში არსებული სხვა ოპერაციული სისტემა უკვე დაშიფრულია.\n\nგაფრთხილება: მიმდინარე სისტემის შიფრაციის მცდელობამ შესაძლოა გამოიწვიოს სხვა სისტემის ჩატვირთვის შეუძლებლობა და მისი მონაცემების დაკარგვა.\n\nნამდვილად გსურთ გაგრძელება?</entry>
<entrylang="en"key="SYS_LOADER_RESTORE_FAILED">Failed to restore the original system loader.\n\nPlease use your VeraCrypt Rescue Disk ('Repair Options' > 'Restore original system loader') or Windows installation medium to replace the VeraCrypt Boot Loader with the Windows system loader.</entry>
<entrylang="ka"key="SYS_LOADER_UNAVAILABLE_FOR_RESCUE_DISK">სისტემის ორიგინალი ჩამტვირთი არ შეინახება აღმდგენ დისკზე (შესაძლო მიზეზი: დაკარგულია სარეზერვო ფაილი).</entry>
<entrylang="ka"key="ERROR_MBR_PROTECTED">MBR სექტორის ჩაწერა ჩაიშალა.\n\nთქვენი BIOS შესაძლოა ჩაწერისაგან იცავს MBR სექტორს. შეამოწმეთ BIOS-ის პარამეტრები.</entry>
<entrylang="en"key="BOOT_LOADER_FINGERPRINT_CHECK_FAILED">WARNING: The verification of VeraCrypt bootloader fingerprint failed!\nYour disk may have been tampered with by an attacker ("Evil Maid" attack).\n\nThis warning can also be triggered if you restored VeraCrypt boot loader using an Rescue Disk generated using a different VeraCrypt version.\n\nYou are advised to change your password immediately which will also restore the correct VeraCrypt bootloader. It is recommended to reinstall VeraCrypt and to take measures to avoid access to this machine by untrusted entities.</entry>
<entrylang="en"key="BOOT_LOADER_VERSION_INCORRECT_PREFERENCES">The required version of the VeraCrypt Boot Loader is currently not installed. This may prevent some of the settings from being saved.</entry>
<entrylang="en"key="CUSTOM_BOOT_LOADER_MESSAGE_HELP">Note: In some situations, you may wish to prevent a person (adversary) that is watching you start the computer from knowing that you use VeraCrypt. The above options allow you to do that by customizing the VeraCrypt boot loader screen. If you enable the first option, no texts will be displayed by the boot loader (not even when you enter the wrong password). The computer will appear to be "frozen" while you can type your password. In addition, a custom message can be displayed to mislead the adversary. For example, fake error messages such as "Missing operating system" (which is normally displayed by the Windows boot loader if it finds no Windows boot partition). It is, however, important to note that if the adversary can analyze the content of the hard drive, he can still find out that it contains the VeraCrypt boot loader.</entry>
<entrylang="en"key="CUSTOM_BOOT_LOADER_MESSAGE_PROMPT">WARNING: Please keep in mind that if you enable this option, the VeraCrypt boot loader will not display any texts (not even when you enter the wrong password). The computer will appear to be "frozen" (unresponsive) while you can type your password (the cursor will NOT move and no asterisk will be displayed when you press a key).\n\nAre you sure you want to enable this option?</entry>
<entrylang="ka"key="SYS_PARTITION_OR_DRIVE_APPEARS_FULLY_ENCRYPTED">თქვენი სისტემური განაყოფი/დისკი მთლიანად დაშიფრულია.</entry>
<entrylang="ka"key="SYSENC_UNSUPPORTED_FOR_DYNAMIC_DISK">VeraCrypt-ს არ აქვს იმ სისტემური დისკის შიფრაციის მხარდაჭერა, რომელიც გარდაიქმნა დინამიურ დისკად</entry>
<entrylang="en"key="WDE_UNSUPPORTED_FOR_EXTENDED_PARTITIONS">The system drive contains extended (logical) partitions.\n\nYou can encrypt an entire system drive containing extended (logical) partitions only on Windows Vista and later versions of Windows. On Windows XP, you can encrypt an entire system drive provided that it contains only primary partitions.\n\nNote: You can still encrypt the system partition instead of the entire system drive (and, in addition to that, you can create partition-hosted VeraCrypt volumes within any non-system partitions on the drive).</entry>
<entrylang="en"key="WDE_EXTENDED_PARTITIONS_WARNING">WARNING: As you are running Windows XP/2003, after you start encrypting the drive, you must NOT create any extended (logical) partitions on it (you may create only primary partitions). Any extended (logical) partition on the drive would be inaccessible after you start encrypting (the drive currently does not contain any such partition).\n\nNote: If this limitation is not acceptable, you can go back and choose to encrypt only the system partition instead of the entire drive (and, in addition to that, you can create partition-hosted VeraCrypt volumes within any non-system partitions on the drive).\n\nAlternatively, if this limitation is not acceptable, you may want to consider upgrading to Windows Vista or a later version of Windows (you can encrypt an entire system drive containing extended/logical partitions only on Windows Vista or later).</entry>
<entrylang="en"key="SYSDRIVE_NON_STANDARD_PARTITIONS">Your system drive contains a non-standard partition.\n\nIf you are using a notebook, your system drive probably contains a special recovery partition. After the whole system drive is encrypted (including any recovery partition), your system might become unbootable if your computer is using an inappropriately designed BIOS. It would also be impossible to use any recovery partition until the system drive is decrypted. Therefore, we recommend that you encrypt only the system partition.</entry>
<entrylang="ka"key="ASK_ENCRYPT_PARTITION_INSTEAD_OF_DRIVE">გსურთ სისტემური განაყოფის შიფრაცია, ნაცვლად მთელი დისკის შიფრაციისა?\n\n თქვენ შეგიძლიათ შექმნათ განაყოფზე დაფუძნებული ტომები დისკზე არსებულ არასისტემურ განაყოფებზე.</entry>
<entrylang="ka"key="WHOLE_SYC_DEVICE_RECOM">რადგან თქვენი სისტემური დისკი მოიცავს მხოლოდ ერთ განაყოფს, რომელიც მთელ დისკს იკავებს, უმჯობესია (უფრო დაცულია) დაშიფროთ მთელი დისკი თავისუფალი სივრცის ჩათვლით.\n\nგსურთ მთელი სისტემური დისკის დაშიფრვა?</entry>
<entrylang="en"key="TEMP_NOT_ON_SYS_PARTITION">Your system is configured to store temporary files on a non-system partition.\n\nTemporary files may be stored only on the system partition.</entry>
<entrylang="en"key="USER_PROFILE_NOT_ON_SYS_PARTITION">Your user profile files are not stored on the system partition.\n\nUser profile files may be stored only on the system partition.</entry>
<entrylang="en"key="PAGING_FILE_NOT_ON_SYS_PARTITION">There is/are paging file(s) on non-system partitions.\n\nPaging files may be located only on the system partition.</entry>
<entrylang="en"key="RESTRICT_PAGING_FILES_TO_SYS_PARTITION">Do you want to configure Windows to create paging files only on the Windows partition now?\n\nNote that if you click 'Yes', the computer will be restarted. Then start VeraCrypt and try creating the hidden OS again.</entry>
<entrylang="en"key="LEAKS_OUTSIDE_SYSPART_UNIVERSAL_EXPLANATION"> Otherwise, plausible deniability of the hidden operating system might be adversely affected.\n\nNote: If an adversary analyzed the content of such files (residing on a non-system partition), he might find out that you used this wizard in the hidden-system-creation mode (which might indicate the existence of a hidden operating system on your computer). Also note that any such files stored on the system partition will be securely erased by VeraCrypt during the process of creation of the hidden operating system.</entry>
<entrylang="en"key="DECOY_OS_REINSTALL_WARNING">WARNING: During the process of creation of the hidden operating system, you will be required to fully reinstall the currently running system (in order to create a decoy system securely).\n\nNote: The currently running operating system and the entire content of the system partition will be copied to the hidden volume (in order to create the hidden system).\n\n\nAre you sure you will be able to install Windows using a Windows Setup medium (or using a service partition)?</entry>
<entrylang="en"key="DECOY_OS_REQUIREMENTS">For security reasons, if the currently running operating system requires activation, it must be activated before proceeding. Note that the hidden operating system will be created by copying the content of the system partition to a hidden volume (so if this operating system is not activated, the hidden operating system will not be activated either). For more information, see the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the VeraCrypt User's Guide.\n\nImportant: Before proceeding, please make sure you have read the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the VeraCrypt User's Guide.\n\n\nDoes the currently running operating system meet the above condition?</entry>
<entrylang="en"key="CONFIRM_HIDDEN_OS_EXTRA_BOOT_PARTITION">Your system uses an extra boot partition. VeraCrypt does not support hibernation on hidden operating systems that use an extra boot partition (decoy systems can be hibernated without any problems).\n\nPlease note that the boot partition would be shared by both the decoy and the hidden system. Therefore, in order to prevent data leaks and problems while resuming from hibernation, VeraCrypt has to prevent the hidden system from writing to the shared boot partition and from hibernating.\n\n\nDo you want to continue? If you select 'No', instructions for removing the extra boot partition will be displayed.</entry>
<entrylang="en"key="EXTRA_BOOT_PARTITION_REMOVAL_INSTRUCTIONS">\nThe extra boot partition can be removed before installing Windows. To do so, follow these steps:\n\n1) Boot your Windows installation disc.\n\n2) In the Windows installer screen, click 'Install now' > 'Custom (advanced)'.\n\n3) Click 'Drive Options'.\n\n4) Select the main system partition and delete it by clicking 'Delete' and 'OK'.\n\n5) Select the 'System Reserved' partition, click 'Extend', and increase its size so that the operating system can be installed to it.\n\n6) Click 'Apply' and 'OK'.\n\n7) Install Windows on the 'System Reserved' partition.\n\n\nShould an attacker ask why you removed the extra boot partition, you can answer that you wanted to prevent any possible data leaks to the unencrypted boot partition.\n\nNote: You can print this text by clicking the 'Print' button below. If you save a copy of this text or print it (strongly recommended, unless your printer stores copies of documents it prints on its internal drive), you should destroy any copies of it after removing the extra boot partition (otherwise, if such a copy was found, it might indicate that there is a hidden operating system on this computer).</entry>
<entrylang="en"key="GAP_BETWEEN_SYS_AND_HIDDEN_OS_PARTITION">Warning: There is unallocated space between the system partition and the first partition behind it. After you create the hidden operating system, you must not create any new partitions in that unallocated space. Otherwise, the hidden operating system will be impossible to boot (until you delete such newly created partitions).</entry>
<entrylang="ka"key="ALGO_NOT_SUPPORTED_FOR_SYS_ENCRYPTION">სისტემის შიფრაციისათვის ეს ალგორითმი ჯერჯერობით არათავსებადია.</entry>
<entrylang="en"key="ALGO_NOT_SUPPORTED_FOR_TRUECRYPT_MODE">This algorithm is not supported for TrueCrypt mode.</entry>
<entrylang="en"key="PIM_NOT_SUPPORTED_FOR_TRUECRYPT_MODE">PIM (Personal Iterations Multiplier) not supported for TrueCrypt mode.</entry>
<entrylang="en"key="PIM_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified PIM.\nShorter passwords can only be used if the PIM is 485 or greater.</entry>
<entrylang="en"key="BOOT_PIM_REQUIRE_LONG_PASSWORD">Pre-boot authentication Password must contain 20 or more characters in order to use the specified PIM.\nShorter passwords can only be used if the PIM is 98 or greater.</entry>
<entrylang="en"key="KEYFILES_NOT_SUPPORTED_FOR_SYS_ENCRYPTION">Keyfiles are currently not supported for system encryption.</entry>
<entrylang="ka"key="CANNOT_RESTORE_KEYBOARD_LAYOUT">გაფრთხილება: VeraCrypt ვერ აღადგენს კლავიატურის ორიგინალ განლაგებას. ამან შესაძლოა პაროლის არასწორი შეტანა გამოიწვიოს.</entry>
<entrylang="ka"key="CANT_CHANGE_KEYB_LAYOUT_FOR_SYS_ENCRYPTION">შეცდომა: VeraCrypt-ისთვის კლავიატურის სტანდარტული US განლაგების დაყენება ვერ ხერხდება.\n\nპაროლი შეტანილ უნდა იქნას ჩატვირთვის პროცესში (Windows-ის სტარტამდე), როდესაც არა-US განლაგების ჩართვა შეუძლებელია. ამიტომ პაროლი აკრეფილნ უნდა იქნას კლავიატურის სტანდარტული US განლაგებით.</entry>
<entrylang="ka"key="ALT_KEY_CHARS_NOT_FOR_SYS_ENCRYPTION">VeraCrypt-მა კლავიატურის განლაგება დროებით სტანდარტულ US განლაგებაზე შეცვალა, ამიტომ სიმბოლოების აკრეფა მარჯვენა Alt კლავიშის დაჭერით შეუძლებელია. თუმცა ამ სიმბოლოების უმეტესობა შეგიძლიათ აკრიფოთ Shift კლავიშის დაჭერით.</entry>
<entrylang="ka"key="KEYB_LAYOUT_SYS_ENC_EXPLANATION">შენიშვნა: პაროლი შეტანილ უნდა იქნას ჩატვირეთვის დროს (Windows-ის სტარტამდე), სადაც არა-US კლავიატურის განლაგებები გამორთულია. ამიტომ პაროლი ყოველთვის სტანდარტული US განლაგებით უნდა იქნას შეტანილი. თუმცა, რეალური US კლავიატურის ქონა აუცილებელი არ არის. VeraCrypt ავტომატურად უქზრუნველყოფს პაროლის სწორად შეტანას ყველა შემთხვევაში.</entry>
<entrylang="en"key="RESCUE_DISK_INFO">Before you can encrypt the partition/drive, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition/drive before Windows starts.\n\n- The VRD will contain a backup of the present content of the first drive track (which typically contains a system loader or boot manager) and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ISO image will be created in the location specified below.</entry>
<entrylang="en"key="RESCUE_DISK_WIN_ISOBURN_PRELAUNCH_NOTE">After you click OK, Microsoft Windows Disc Image Burner will be launched. Please use it to burn the VeraCrypt Rescue Disk ISO image to a CD or DVD.\n\nAfter you do so, return to the VeraCrypt Volume Creation Wizard and follow its instructions.</entry>
<entrylang="en"key="RESCUE_DISK_BURN_INFO">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn it to a CD or DVD.\n\n%lsAfter you burn the Rescue Disk, click Next to verify that it has been correctly burned.</entry>
<entrylang="en"key="RESCUE_DISK_BURN_INFO_NO_CHECK">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you should either burn the image to a CD/DVD or move it to a safe location for later use.\n\n%lsClick Next to continue.</entry>
<entrylang="en"key="RESCUE_DISK_BURN_INFO_NONWIN_ISO_BURNER">IMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software. If you do not have any CD/DVD recording software that can write the ISO disk image to a CD/DVD, click the link below to download such free software.\n\n</entry>
<entrylang="en"key="LAUNCH_WIN_ISOBURN">Launch Microsoft Windows Disc Image Burner</entry>
<entrylang="en"key="RESCUE_DISK_BURN_NO_CHECK_WARN">WARNING: If you already created a VeraCrypt Rescue Disk in the past, it cannot be reused for this system partition/drive because it was created for a different master key! Every time you encrypt a system partition/drive, you must create a new VeraCrypt Rescue Disk for it even if you use the same password.</entry>
<entrylang="ka"key="CANNOT_SAVE_SYS_ENCRYPTION_SETTINGS">შეცდომა: სისტემის შიფრაციის პარამეტრების შენახვა შეუძლებელია.</entry>
<entrylang="en"key="INPLACE_ENC_WIPE_MODE_INFO">On some types of storage media, when data is overwritten with other data, it may be possible to recover the overwritten data using techniques such as magnetic force microscopy. This also applies to data that are overwritten with their encrypted form (which happens when VeraCrypt initially encrypts an unencrypted partition or drive). According to some studies and governmental publications, recovery of overwritten data can be prevented (or made very difficult) by overwritting the data with pseudorandom and certain non-random data a certain number of times. Therefore, if you believe that an adversary might be able to use such techniques to recover the data you intend encrypt, you may want to select one of the wipe modes (existing data will NOT be lost). Note that wiping will NOT be performed after the partition/drive is encrypted. When the partition/drive is fully encrypted, no unencrypted data is written to it. Any data being written to it is first encrypted on the fly in memory and only then is the (encrypted) data written to the disk.</entry>
<entrylang="en"key="WIPE_MODE_INFO">On some types of storage media, when data is overwritten with other data (e.g. when the data is erased), it may be possible to recover the overwritten data using techniques such as magnetic force microscopy. According to some studies and governmental publications, recovery of overwritten data can be prevented (or made very difficult) by overwritting the data with pseudorandom and certain non-random data a certain number of times. Therefore, if you believe that an adversary might be able to use such techniques to recover the data that is to be erased, you may want to select one of the multi-pass wipe modes.\n\nNote: The more wipe passes you use, the longer it takes to erase the data.</entry>
<entrylang="en"key="DEVICE_WIPE_PAGE_INFO_HIDDEN_OS">\nNote: You can interrupt the process of wiping, shut down your computer, start the hidden system again and then resume the process (this wizard will be launched automatically). However, if you interrupt it, the entire process of wiping will have to start from the beginning.</entry>
<entrylang="en"key="DEVICE_WIPE_PAGE_INFO">\n\nNote: If you interrupt the process of wiping and then attempt to resume it, the entire process will have to start from the beginning.</entry>
<entrylang="en"key="CONFIRM_WIPE_ABORT">Do you want to abort the process of wiping?</entry>
<entrylang="en"key="CONFIRM_WIPE_START">Warning: The entire content of the selected partition/device will be erased and lost.</entry>
<entrylang="en"key="CONFIRM_WIPE_START_DECOY_SYS_PARTITION">The entire content of the partition where the original system resides will be erased.\n\nNote: The entire content of the partition that is to be erased has been copied to this hidden system partition.</entry>
<entrylang="en"key="WIPE_MODE_WARN">WARNING: Note that when you choose e.g. the 3-pass wipe mode, the time necessary to encrypt the partition/drive will be up to 4 times longer. Likewise, if you choose the 35-pass wipe mode, it will be up to 36 times longer (it might even take several weeks).\n\nHowever, please note that wiping will NOT be performed after the partition/drive is fully encrypted. When the partition/drive is fully encrypted, no unencrypted data is written to it. Any data being written to it is first encrypted on the fly in memory and only then is the (encrypted) data written to the disk (so the performance will NOT be affected).\n\nAre you sure you want to use the wipe mode?</entry>
<entrylang="en"key="HIDDEN_OS_MULTI_BOOT">When creating/using a hidden operating system, VeraCrypt supports multi-boot configurations only when the following conditions are met:\n\n- The currently running operating system must be installed on the boot drive, which must not contain any other operating systems.\n\n- Operating systems installed on other drives must not use any boot loader residing on the drive on which the currently running operating system is installed.\n\nAre the above conditions met?</entry>
<entrylang="en"key="UNSUPPORTED_HIDDEN_OS_MULTI_BOOT_CFG">VeraCrypt does not support this multi-boot configuration when creating/using a hidden operating system.</entry>
<entrylang="ka"key="SYSENC_MULTI_BOOT_SYS_EQ_BOOT_HELP">მიმდინარე ოპერაციული სისტემა ინსტალირებულია ჩამტვირთ დისკზე?\n\nშენიშვნა:ზოგჯერ Windows არ არის ინსტალირებული იმავე დისკზე, საიდანაც იტვირთება. თუ ეს ის შემთხვევაა, აირჩიეთ "არა".</entry>
<entrylang="ka"key="SYS_PARTITION_MUST_BE_ON_BOOT_DRIVE">VeraCrypt-ს ამჟამად არ აქვს იმ ოპერაციული სისტემების შიფრაციის მხარდაჭერა, რომლებიც ინსტალირებულია არაჩამტვირთავ დისკზე.</entry>
<entrylang="ka"key="SYSENC_MULTI_BOOT_NBR_SYS_DRIVES_HELP">რამდენი დისკი მოიცავს ოპერაციულ სისტემას?\n\nშენიშვნა: მაგ., თუ გაქვთ რომელიმე ოპერაციული სისტემა (Windows, Mac OS X, Linux, ა.შ.) ინსტალირებული პირველად დისკზე, და დამატებით ოპერაციული სისტემა ინსტალირებული მეორად დისკზე, აირჩიეთ "2 ან მეტი".</entry>
<entrylang="ka"key="WDE_UNSUPPORTED_FOR_MULTIPLE_SYSTEMS_ON_ONE_DRIVE">VeraCrypt-ს არ აქვს მხარდაჭერა დისკებისა, რომლებიც მოიცავენ რამდენიმე ოპერაციულ სისტემას.\n\nშესაძლო გამოსავალი:\n\n- შეგიძლიათ დაშიფროთ რომელიმე სისტემა, თუ დაბრუნდებიტ უკან და აირჩევთ მხოლოდ ერთ სისტემურ განაყოფს (მთელი დისკის დაშიფვრის ნაცვლად).\n\n- შეგიძლიათ დაშიფროთ მთელი დისკი, თუ დისკზე დატოვებთ მხოლოდ ერთ ოპერაციულ სისტემას, ხოლო დანარჩენებს სხვაგან გადაიტანთ.</entry>
<entrylang="ka"key="SYSENC_MULTI_BOOT_ADJACENT_SYS_TITLE">რამდენიმე ოპერაციული სისტემა ერთ დისკზე</entry>
<entrylang="ka"key="SYSENC_MULTI_BOOT_ADJACENT_SYS_HELP">იმავე დისკზე, რომელზეც მიმდინარე ოპერაციული სისტემაა ინსტალირებული, არის თუ არა სხვა ოპერაციული სისტემები?\n\nშენიშვნა: თუ მაგ. მიმდინარე ოპერაციული სისტემა ინსტალირებულია დისკზე #0, რომელიც მოიცავს რამდენიმე განაყოფს, და რომელიმე განაყოფზე ინსტალირებულია სხვა ოპერაციული სისტემა (Windows, Mac OS X, Linux, ა.შ.), დაწკაპეთ "დიახ".</entry>
<entrylang="ka"key="SYSENC_MULTI_BOOT_NONWIN_BOOT_LOADER_TITLE">არა-Windows-ის საწყისი ჩამტვირთი</entry>
<entrylang="en"key="SYSENC_MULTI_BOOT_NONWIN_BOOT_LOADER_HELP">Is a non-Windows boot loader (or boot manager) installed in the master boot record (MBR)?\n\nNote: For example, if the first track of the boot drive contains GRUB, LILO, XOSL, or some other non-Windows boot manager (or boot loader), select 'Yes'.</entry>
<entrylang="ka"key="CUSTOM_BOOT_MANAGERS_IN_MBR_UNSUPPORTED">VeraCrypt-ს არ აქვს მრავალ-ჩამტვირთი კონფუგურაციის მხარდაჭერა, როდესაც MBR-ზე ინსტალირებულია არა-Windows-ის ჩამტვირთი მოდული.\n\nშესაძლო გამოსავალი:\n\n- თუ იყენებთ ჩატვირთვის მენეჯერს Windows-ის და Linux-ის ჩასატვირთად, ჩატვირთვის მენეჯერი (GRUB) გადაიტანეთ MBR-დან განაყოფში. შემდეგ გაუშვით ეს ოსტატი ხელახლა და დაშიფრეტ სისტემური განაყოფი/დისკი. VeraCrypt-ის ჩამტვირთი მოდული გახდება მთავარი ჩამტვირთი მოდული და იგი მოგცემთ საშუალებას გაუშვათ ორიგინალი ჩამტვირთი (GRUB) როგორც მეორადი ჩატვირთვის მენეჯერი (Esc დაჭერით VeraCrypt-ის ჩამტვირთის ეკრანზე) და ამდენად ჩატვირთოთ Linux.</entry>
<entrylang="en"key="WINDOWS_BOOT_LOADER_HINTS">If the currently running operating system is installed on the boot partition, then, after you encrypt it, you will need to enter the correct password even if you want to start any other unencrypted Windows system(s) (as they will share a single encrypted Windows boot loader/manager).\n\nIn contrast, if the currently running operating system is not installed on the boot partition (or if the Windows boot loader/manager is not used by any other system), then, after you encrypt this system, you will not need to enter the correct password to boot the other unencrypted system(s) -- you will only need to press the Esc key to start the unencrypted system (if there are multiple unencrypted systems, you will also need to choose which system to start in the VeraCrypt Boot Manager menu).\n\nNote: Typically, the earliest installed Windows system is installed on the boot partition.</entry>
<entrylang="en"key="SYSENC_PRE_DRIVE_ANALYSIS_TITLE">Encryption of Host Protected Area</entry>
<entrylang="en"key="SYSENC_PRE_DRIVE_ANALYSIS_HELP">At the end of many drives, there is an area that is normally hidden from the operating system (such areas are usually referred to as Host Protected Areas). However, some programs can read and write data from/to such areas.\n\nWARNING: Some computer manufacturers may use such areas to store tools and data for RAID, system recovery, system setup, diagnostic, or other purposes. If such tools or data must be accessible before booting, the hidden area should NOT be encrypted (choose 'No' above).\n\nDo you want VeraCrypt to detect and encrypt such a hidden area (if any) at the end of the system drive?</entry>
<entrylang="en"key="SYSENC_TYPE_PAGE_TITLE">Type of System Encryption</entry>
<entrylang="en"key="SYSENC_NORMAL_TYPE_HELP">Select this option if you merely want to encrypt the system partition or the entire system drive.</entry>
<entrylang="en"key="SYSENC_HIDDEN_TYPE_HELP">It may happen that you are forced by somebody to decrypt the operating system. There are many situations where you cannot refuse to do so (for example, due to extortion). If you select this option, you will create a hidden operating system whose existence should be impossible to prove (provided that certain guidelines are followed). Thus, you will not have to decrypt or reveal the password to the hidden operating system. For a detailed explanation, please click the link below.</entry>
<entrylang="en"key="HIDDEN_OS_PREINFO">It may happen that you are forced by somebody to decrypt the operating system. There are many situations where you cannot refuse to do so (for example, due to extortion).\n\nUsing this wizard, you can create a hidden operating system whose existence should be impossible to prove (provided that certain guidelines are followed). Thus, you will not have to decrypt or reveal the password for the hidden operating system.</entry>
<entrylang="en"key="SYSENC_HIDDEN_OS_REQ_CHECK_PAGE_HELP">In the following steps, you will create two VeraCrypt volumes (outer and hidden) within the first partition behind the system partition. The hidden volume will contain the hidden operating system (OS). VeraCrypt will create the hidden OS by copying the content of the system partition (where the currently running OS is installed) to the hidden volume. To the outer volume, you will copy some sensitive looking files that you actually do NOT want to hide. They will be there for anyone forcing you to disclose the password for the hidden OS partition. You can reveal the password for the outer volume within the hidden OS partition (the existence of the hidden OS remains secret).\n\nFinally, on the system partition of the currently running OS, you will install a new OS, so-called decoy OS, and encrypt it. It must not contain sensitive data and will be there for anyone forcing you to reveal your pre-boot authentication password. In total, there will be three passwords. Two of them can be disclosed (for the decoy OS and outer volume). If you use the third one, the hidden OS will start.</entry>
<entrylang="en"key="SYSENC_DRIVE_ANALYSIS_INFO">Please wait while VeraCrypt is detecting possible hidden sectors at the end of the system drive. Note that it may take a long time to complete.\n\nNote: In very rare cases, on some computers, the system may become unresponsive during this detection process. If it happens, restart the computer, start VeraCrypt, repeat the previous steps but skip this detection process. Note that this issue is not caused by a bug in VeraCrypt.</entry>
<entrylang="en"key="SYS_ENCRYPTION_SPAN_WHOLE_SYS_DRIVE_HELP">Select this option if you want to encrypt the entire drive on which the currently running Windows system is installed. The whole drive, including all its partitions, will be encrypted except the first track where the VeraCrypt Boot Loader will reside. Anyone who wants to access a system installed on the drive, or files stored on the drive, will need to enter the correct password each time before the system starts. This option cannot be used to encrypt a secondary or external drive if Windows is not installed on it and does not boot from it.</entry>
<entrylang="ka"key="COLLECTING_RANDOM_DATA_TITLE">შემთხვევითი მონაცემების შეგროვება</entry>
<entrylang="en"key="CD_BURNER_NOT_PRESENT">VeraCrypt has found no CD/DVD burner connected to your computer. VeraCrypt needs a CD/DVD burner to burn a bootable VeraCrypt Rescue Disk containing a backup of the encryption keys, VeraCrypt boot loader, original system loader, etc.\n\nWe strongly recommend that you burn the VeraCrypt Rescue Disk.</entry>
<entrylang="en"key="CD_BURNER_NOT_PRESENT_WILL_STORE_ISO">I have no CD/DVD burner but I will store the Rescue Disk ISO image on a removable drive (e.g. USB flash drive).</entry>
<entrylang="en"key="CD_BURNER_NOT_PRESENT_WILL_CONNECT_LATER">I will connect a CD/DVD burner to my computer later. Terminate the process now.</entry>
<entrylang="en"key="CD_BURNER_NOT_PRESENT_CONNECTED_NOW">A CD/DVD burner is connected to my computer now. Continue and write the Rescue Disk.</entry>
<entrylang="en"key="CD_BURNER_NOT_PRESENT_WILL_STORE_ISO_INFO">Please follow these steps:\n\n1) Connect a removable drive, such as a USB flash drive, to your computer now.\n\n2) Copy the VeraCrypt Rescue Disk image file (%s) to the removable drive.\n\nIn case you need to use the VeraCrypt Rescue Disk in the future, you will be able to connect your removable drive (containing the VeraCrypt Rescue Disk image) to a computer with a CD/DVD burner and create a bootable VeraCrypt Rescue Disk by burning the image to a CD or DVD. IMPORTANT: Note that the VeraCrypt Rescue Disk image file must be written to the CD/DVD as an ISO disk image (not as an individual file).</entry>
<entrylang="ka"key="RESCUE_DISK_RECORDING_TITLE">აღდგენი დისკის ჩაწერა</entry>
<entrylang="ka"key="RESCUE_DISK_CREATED_TITLE">აღმდგენი დისკი შეიქმნა.</entry>
<entrylang="ka"key="RESCUE_DISK_DISK_VERIFIED_TITLE">აღმდგენი დისკი შემოწმებულია</entry>
<entrylang="ka"key="RESCUE_DISK_VERIFIED_INFO">\nVeraCrypt-ის აღმდგენი დისკი წარმატებით შემოწმდა. გამოიღეთ იგი და შეინახეთ დაცულ ადგილზე.\n\nდაწკაპეთ "შემდეგი" გასაგრძელებლად.</entry>
<entrylang="en"key="REMOVE_RESCUE_DISK_FROM_DRIVE">WARNING: During the next steps, the VeraCrypt Rescue Disk must not be in the drive. Otherwise, it will not be possible to complete the steps correctly.\n\nPlease remove it from the drive now and store it in a safe place. Then click OK.</entry>
<entrylang="ka"key="PREBOOT_NOT_LOCALIZED">გაფრთხილება: ჩატვირთვისწინა გარემოს ტექნიკური შეზღუდულობის გამო, VeraCrypt-ის მიერ გამოტანილი ტექსტი ვერ იქნება ლოკალიზებული. VeraCrypt ჩამტვირთი მოდულის ინტერფეისი მთლიანად ინგლისურ ენაზეა.\n\nგავაგრძელოთ?</entry>
<entrylang="ka"key="SYS_ENCRYPTION_PRETEST_INFO">სისტემური განაყოფის ან დისკის შიფრაციის წინ, VeraCrypt შეამოწმებს მუშაობის გამართულობას.\n\n"ტესტი"-ს დაწკაპუნების შემდეგ, ყველა საჭირო კომპონენტი (მაგ. VeraCrypt ჩამტვირთი მოდული) დაინსტალირდება და კომპიუტერი დარესტარტდება. VeraCrypt ჩატვირთვის მოდულის ეკრანზე შეიტანეთ სწორეი პაროლი. Windows-ის ჩატვირთვის შემდეგ ავტომატურად იქნება გამოტანილი ინფორმაცია საწყისი ტესტირების შესახებ.\n\nმოდიფიცირებული იქნება შემდეგი მოწყობილობა: დისკი #%d\n\n\nთუ დაწკაპებთ ღილაკს "უარი", მაშინ ინსტალაცია არ მოხდება და საწყისი ტესტი არ გაეშვება.</entry>
<entrylang="en"key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_1">IMPORTANT NOTES -- PLEASE READ OR PRINT (click 'Print'):\n\nNote that none of your files will be encrypted before you successfully restart your computer and start Windows. Thus, if anything fails, your data will NOT be lost. However, if something does go wrong, you might encounter difficulties in starting Windows. Therefore, please read (and, if possible, print) the following guidelines on what to do if Windows cannot start after you restart the computer.\n\n</entry>
<entrylang="en"key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_2">What to Do If Windows Cannot Start\n------------------------------------------------\n\nNote: These instructions are valid only if you have not started encrypting.\n\n- If Windows does not start after you enter the correct password (or if you repeatedly enter the correct password but VeraCrypt says that the password is incorrect), do not panic. Restart (power off and on) the computer, and in the VeraCrypt Boot Loader screen, press the Esc key on your keyboard (and if you have multiple systems, choose which to start). Then Windows should start (provided that it is not encrypted) and VeraCrypt will automatically ask whether you want to uninstall the pre-boot authentication component. Note that the previous steps do NOT work if the system partition/drive is encrypted (nobody can start Windows or access encrypted data on the drive without the correct password even if he or she follows the previous steps).\n\n</entry>
<entrylang="en"key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_3">- If the previous steps do not help or if the VeraCrypt Boot Loader screen does not appear (before Windows starts), insert the VeraCrypt Rescue Disk into your CD/DVD drive and restart your computer. If the VeraCrypt Rescue Disk screen does not appear (or if you do not see the 'Repair Options' item in the 'Keyboard Controls' section of the VeraCrypt Rescue Disk screen), it is possible that your BIOS is configured to attempt to boot from hard drives before CD/DVD drives. If that is the case, restart your computer, press F2 or Delete (as soon as you see a BIOS start-up screen), and wait until a BIOS configuration screen appears. If no BIOS configuration screen appears, restart (reset) the computer again and start pressing F2 or Delete repeatedly as soon as you restart (reset) the computer. When a BIOS configuration screen appears, configure your BIOS to boot from the CD/DVD drive first (for information on how to do so, please refer to the documentation for your BIOS/motherboard or contact your computer vendor's technical support team for assistance). Then restart your computer. The VeraCrypt Rescue Disk screen should appear now. In the VeraCrypt Rescue Disk screen, select 'Repair Options' by pressing F8 on your keyboard. From the 'Repair Options' menu, select 'Restore original system loader'. Then remove the Rescue Disk from your CD/DVD drive and restart your computer. Windows should start normally (provided that it is not encrypted).\n\n</entry>
<entrylang="en"key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_4">Note that the previous steps do NOT work if the system partition/drive is encrypted (nobody can start Windows or access encrypted data on the drive without the correct password even if he or she follows the previous steps).\n\n\nNote that even if you lose your VeraCrypt Rescue Disk and an attacker finds it, he or she will NOT be able to decrypt the system partition or drive without the correct password.</entry>
<entrylang="en"key="SYS_ENCRYPTION_PRETEST_RESULT_INFO">The pretest has been successfully completed.\n\nWARNING: Please note that if power supply is suddenly interrupted while encrypting existing data in place, or when the operating system crashes due to a software error or hardware malfunction while VeraCrypt is encrypting existing data in place, portions of the data will be corrupted or lost. Therefore, before you start encrypting, please make sure that you have backup copies of the files you want to encrypt. If you do not, please back up the files now (you can click Defer, back up the files, then run VeraCrypt again anytime, and select 'System' > 'Resume Interrupted Process' to start encrypting).\n\nWhen ready, click Encrypt to start encrypting.</entry>
<entrylang="en"key="SYSENC_ENCRYPTION_PAGE_INFO">You can click Pause or Defer anytime to interrupt the process of encryption or decryption, exit this wizard, restart or shut down your computer, and then resume the process, which will continue from the point it was stopped. To prevent slowdown when the system or applications write or read data from the system drive, VeraCrypt automatically waits until the data is written or read (see Status above) and then automatically continues encrypting or decrypting.</entry>
<entrylang="en"key="NONSYS_INPLACE_ENC_ENCRYPTION_PAGE_INFO">\n\nYou can click Pause or Defer anytime to interrupt the process of encryption, exit this wizard, restart or shut down your computer, and then resume the process, which will continue from the point it was stopped. Note that the volume cannot be mounted until it has been fully encrypted.</entry>
<entrylang="en"key="NONSYS_INPLACE_DEC_DECRYPTION_PAGE_INFO">\n\nYou can click Pause or Defer anytime to interrupt the process of decryption, exit this wizard, restart or shut down the computer, and then resume the process, which will continue from the point where it was stopped. Note that the volume cannot be mounted until it has been fully decrypted.</entry>
<entrylang="en"key="SYSENC_HIDDEN_OS_INITIAL_INFO_TITLE">Hidden System Started</entry>
<entrylang="en"key="SYSENC_HIDDEN_OS_WIPE_INFO">Windows creates (typically, without your knowledge or consent) various log files, temporary files, etc., on the system partition. It also saves the content of RAM to hibernation and paging files located on the system partition. Therefore, if an adversary analyzed files stored on the partition where the original system (of which the hidden system is a clone) resides, he might find out, for example, that you used the VeraCrypt wizard in the hidden-system-creation mode (which might indicate the existence of a hidden operating system on your computer).\n\nTo prevent such issues, VeraCrypt will, in the next steps, securely erase the entire content of the partition where the original system resides. Afterwards, in order to achieve plausible deniability, you will need to install a new system on the partition and encrypt it. Thus you will create the decoy system and the whole process of creation of the hidden operating system will be completed.</entry>
<entrylang="en"key="OS_WIPING_NOT_FINISHED_ASK">The hidden operating system has been successfully created. However, before you can start using it (and achieve plausible deniability), you need to securely erase (using VeraCrypt) the entire content of the partition where the currently running operating system is installed. Before you can do that, you need to restart the computer and, in the VeraCrypt Boot Loader screen (which appears before Windows starts), enter the pre-boot authentication password for the hidden operating system. Then, after the hidden system starts, the VeraCrypt wizard will be launched automatically.\n\nNote: If you choose to terminate the process of creation of the hidden operating system now, you will NOT be able to resume the process and the hidden system will NOT be accessible (because the VeraCrypt Boot Loader will be removed).</entry>
<entrylang="en"key="HIDDEN_OS_CREATION_NOT_FINISHED_ASK">You have scheduled the process of creation of a hidden operating system. The process has not been completed yet. To complete it, you need to restart the computer and, in the VeraCrypt Boot Loader screen (which appears before Windows starts), enter the password for the hidden operating system.\n\nNote: If you choose to terminate the process of creation of the hidden operating system now, you will NOT be able to resume the process.</entry>
<entrylang="en"key="HIDDEN_OS_CREATION_NOT_FINISHED_CHOICE_RETRY">Restart the computer and proceed</entry>
<entrylang="en"key="HIDDEN_OS_CREATION_NOT_FINISHED_CHOICE_TERMINATE">Permanently terminate the process of creation of the hidden operating system</entry>
<entrylang="en"key="HIDDEN_OS_CREATION_NOT_FINISHED_CHOICE_ASK_LATER">Do nothing now and ask again later</entry>
<entrylang="en"key="RESCUE_DISK_HELP_PORTION_1">\nIF POSSIBLE, PLEASE PRINT THIS TEXT (click 'Print' below).\n\n\nHow and When to Use VeraCrypt Rescue Disk (After Encrypting)\n-----------------------------------------------------------------------------------\n\n</entry>
<entrylang="en"key="RESCUE_DISK_HELP_PORTION_2">I. How to Boot VeraCrypt Rescue Disk\n\nTo boot a VeraCrypt Rescue Disk, insert it into your CD/DVD drive and restart your computer. If the VeraCrypt Rescue Disk screen does not appear (or if you do not see the 'Repair Options' item in the 'Keyboard Controls' section of the screen), it is possible that your BIOS is configured to attempt to boot from hard drives before CD/DVD drives. If that is the case, restart your computer, press F2 or Delete (as soon as you see a BIOS start-up screen), and wait until a BIOS configuration screen appears. If no BIOS configuration screen appears, restart (reset) the computer again and start pressing F2 or Delete repeatedly as soon as you restart (reset) the computer. When a BIOS configuration screen appears, configure your BIOS to boot from the CD/DVD drive first (for information on how to do so, please refer to the documentation for your BIOS/motherboard or contact your computer vendor's technical support team for assistance). Then restart your computer. The VeraCrypt Rescue Disk screen should appear now. Note: In the VeraCrypt Rescue Disk screen, you can select 'Repair Options' by pressing F8 on your keyboard.\n\n\n</entry>
<entrylang="en"key="RESCUE_DISK_HELP_PORTION_3">II. When and How to Use VeraCrypt Rescue Disk (After Encrypting)\n\n</entry>
<entrylang="en"key="RESCUE_DISK_HELP_PORTION_4">1) If the VeraCrypt Boot Loader screen does not appear after you start your computer (or if Windows does not boot), the VeraCrypt Boot Loader may be damaged. The VeraCrypt Rescue Disk allows you to restore it and thus to regain access to your encrypted system and data (however, note that you will still have to enter the correct password then). In the Rescue Disk screen, select 'Repair Options' > 'Restore VeraCrypt Boot Loader'. Then press 'Y' to confirm the action, remove the Rescue Disk from your CD/DVD drive and restart your computer.\n\n</entry>
<entrylang="en"key="RESCUE_DISK_HELP_PORTION_5">2) If you repeatedly enter the correct password but VeraCrypt says that the password is incorrect, the master key or other critical data may be damaged. The VeraCrypt Rescue Disk allows you to restore them and thus to regain access to your encrypted system and data (however, note that you will still have to enter the correct password then). In the Rescue Disk screen, select 'Repair Options' > 'Restore key data'. Then enter your password, press 'Y' to confirm the action, remove the Rescue Disk from your CD/DVD drive, and restart your computer.\n\n</entry>
<entrylang="en"key="RESCUE_DISK_HELP_PORTION_6">3) If the VeraCrypt Boot Loader is damaged, you can avoid running it by booting directly from the VeraCrypt Rescue Disk. Insert your Rescue Disk into your CD/DVD drive and then enter your password in the Rescue Disk screen.\n\n</entry>
<entrylang="en"key="RESCUE_DISK_HELP_PORTION_7">4) If Windows is damaged and cannot start, the VeraCrypt Rescue Disk allows you to permanently decrypt the partition/drive before Windows starts. In the Rescue Disk screen, select 'Repair Options' > 'Permanently decrypt system partition/drive'. Enter the correct password and wait until decryption is complete. Then you can e.g. boot your MS Windows setup CD/DVD to repair your Windows installation.\n\n</entry>
<entrylang="en"key="RESCUE_DISK_HELP_PORTION_8">Note: Alternatively, if Windows is damaged (cannot start) and you need to repair it (or access files on it), you can avoid decrypting the system partition/drive by following these steps: If you have multiple operating systems installed on your computer, boot the one that does not require pre-boot authentication. If you do not have multiple operating systems installed on your computer, you can boot a WinPE or BartPE CD/DVD or you can connect your system drive as a secondary or external drive to another computer and then boot the operating system installed on the computer. After you boot a system, run VeraCrypt, click 'Select Device', select the affected system partition, click 'OK', select 'System' > 'Mount Without Pre-Boot Authentication', enter your pre-boot authentication password and click 'OK'. The partition will be mounted as a regular VeraCrypt volume (data will be on-the-fly decrypted/encrypted in RAM on access, as usual).\n\n\n</entry>
<entrylang="en"key="RESCUE_DISK_HELP_PORTION_9">Note that even if you lose your VeraCrypt Rescue Disk and an attacker finds it, he or she will NOT be able to decrypt the system partition or drive without the correct password.</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_1">\n\nI M P O R T A N T -- PLEASE PRINT THIS TEXT IF POSSIBLE (click 'Print' below).\n\n\nNote: This text will be automatically displayed each time you start the hidden system until you start creating the decoy system.\n\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_2">How to Create Decoy System Safely and Securely\n----------------------------------------------------------------------------\n\nIn order to achieve plausible deniability, you need to create the decoy operating system now. To do so, follow these steps:\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_3">1) For security reasons, shut down your computer and leave it powered off for at least several minutes (the longer, the better). This is required to clear the memory, which contains sensitive data. Then turn on the computer but do not boot the hidden system.\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_4">2) Install Windows on the partition whose content has been erased (i.e. on the partition where the original system, of which the hidden system is a clone, was installed).\n\nIMPORTANT: WHEN YOU START INSTALLING THE DECOY SYSTEM, THE HIDDEN SYSTEM WILL *NOT* BE POSSIBLE TO BOOT (because the VeraCrypt Boot Loader will be erased by the Windows system installer). THIS IS NORMAL AND EXPECTED. PLEASE DO NOT PANIC. YOU WILL BE ABLE TO BOOT THE HIDDEN SYSTEM AGAIN AS SOON AS YOU START ENCRYPTING THE DECOY SYSTEM (because VeraCrypt will then automatically install the VeraCrypt Boot Loader on the system drive).\n\nImportant: The size of the decoy system partition must remain the same as the size of the hidden volume (this condition is now met). Moreover, you must not create any partition between the decoy system partition and the partition where the hidden system resides.\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_5">3) Boot the decoy system (which you installed in step 2 and install VeraCrypt on it).\n\nKeep in mind that the decoy system must never contain any sensitive data.\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_6">4) On the decoy system, run VeraCrypt and select 'System' > 'Encrypt System Partition/Drive'. The VeraCrypt Volume Creation Wizard window should appear.\n\nThe following steps apply to the VeraCrypt Volume Creation Wizard.\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_7">5) In the VeraCrypt Volume Creation Wizard, do NOT select the 'Hidden' option. Leave the 'Normal' option selected and click 'Next'.\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_8">6) Select the option 'Encrypt the Windows system partition' and then click 'Next'.\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_9">7) If there are only the hidden system and the decoy system installed on the computer, select the option 'Single-boot' (if there are more than these two systems installed on the computer, select 'Multi-boot'). Then click 'Next'.\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_10">8) IMPORTANT: In this step, FOR THE DECOY SYSTEM, YOU MUST SELECT THE SAME ENCRYPTION ALGORITHM AND HASH ALGORITHM THAT YOU SELECTED FOR THE HIDDEN SYSTEM! OTHERWISE, THE HIDDEN SYSTEM WILL BE INACCESSIBLE! In other words, the decoy system must be encrypted with the same encryption algorithm as the hidden system. Note: The reason is that the decoy system and the hidden system will share a single boot loader, which supports only a single algorithm, selected by the user (for each algorithm, there is a special version of the VeraCrypt Boot Loader).\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_11">9) In this step, choose a password for the decoy operating system. This will be the password that you will be able to reveal to an adversary if you are asked or forced to disclose your pre-boot authentication password (the other password you can reveal is the one for the outer volume). The existence of the third password (i.e. of the pre-boot authentication password for the hidden operating system) will remain secret.\n\nImportant: The password you choose for the decoy system must be substantially different from the one you chose for the hidden volume (i.e. for the hidden operating system).\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_12">10) Follow the remaining instructions in the wizard so as to encrypt the decoy operating system.\n\n\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_13">After Decoy System Is Created\n------------------------------------------------\n\nAfter you encrypt the decoy system, the whole process of creation of the hidden operating system will be completed and you will be able to use these three passwords:\n\n1) Pre-boot authentication password for the hidden operating system.\n\n2) Pre-boot authentication password for the decoy operating system.\n\n3) Password for the outer volume.\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_14">If you want to start the hidden operating system, you will just need to enter the password for the hidden operating system in the VeraCrypt Boot Loader screen (which appears after you turn on or restart your computer).\n\nIf you want to start the decoy operating system, you will just need to enter the password for the decoy operating system in the VeraCrypt Boot Loader screen.\n\nThe password for the decoy system can be disclosed to anyone forcing you to reveal your pre-boot authentication password. The existence of the hidden volume (and of the hidden operating system) will remain secret.\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_15">The third password (for the outer volume) can be disclosed to anyone forcing you to reveal the password for the first partition behind the system partition, where both the outer volume and the hidden volume (containing the hidden operating system) reside. The existence of the hidden volume (and of the hidden operating system) will remain secret.\n\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_16">If you revealed the password for the decoy system to an adversary and he asked you why the free space of the (decoy) system partition contains random data, you could answer, for example: "The partition previously contained a system encrypted by VeraCrypt, but I forgot the pre-boot authentication password (or the system was damaged and stopped booting), so I had to reinstall Windows and encrypt the partition again."\n\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_17">If all the instructions are followed and if the precautions and requirements listed in the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the VeraCrypt User's Guide are followed, it should be impossible to prove that the hidden volume and hidden operating system exist, even when the outer volume is mounted or when the decoy operating system is decrypted or started.\n\nIf you save a copy of this text or print it (strongly recommended, unless your printer stores copies of documents it prints on its internal drive), you should destroy any copies of it after you have created the decoy system and after you have understood all the information contained in the text (otherwise, if such a copy was found, it might indicate that there is a hidden operating system on this computer).\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_18">WARNING: IF YOU DO NOT PROTECT THE HIDDEN VOLUME (for information on how to do so, refer to the section "Protection of Hidden Volumes Against Damage" in the VeraCrypt User's Guide), DO NOT WRITE TO THE OUTER VOLUME (note that the decoy operating system is NOT installed in the outer volume). OTHERWISE, YOU MAY OVERWRITE AND DAMAGE THE HIDDEN VOLUME (AND THE HIDDEN OPERATING SYSTEM WITHIN IT)!</entry>
<entrylang="en"key="HIDDEN_OS_CREATION_PREINFO_TITLE">Operating System Cloning</entry>
<entrylang="en"key="HIDDEN_OS_CREATION_PREINFO_HELP">In the next steps, VeraCrypt will create the hidden operating system by copying the content of the system partition to the hidden volume (data being copied will be encrypted on the fly with an encryption key different from the one that will be used for the decoy operating system).\n\nPlease note that the process will be performed in the pre-boot environment (before Windows starts) and it may take a long time to complete; several hours or even several days (depending on the size of the system partition and on the performance of your computer).\n\nYou will be able to interrupt the process, shut down your computer, start the operating system and then resume the process. However, if you interrupt it, the entire process of copying the system will have to start from the beginning (because the content of the system partition must not change during cloning).</entry>
<entrylang="en"key="CONFIRM_CANCEL_HIDDEN_OS_CREATION">Do you want to cancel the entire process of creation of the hidden operating system?\n\nNote: You will NOT be able to resume the process if you cancel it now.</entry>
<entrylang="ka"key="CONFIRM_CANCEL_SYS_ENC_PRETEST">გსურთ სისტემის შიფრაციისწინა ტესტირების შეწყვეტა?</entry>
<entrylang="en"key="BOOT_PRETEST_FAILED_RETRY">The VeraCrypt system encryption pretest failed. Do you want to try again?\n\nIf you select 'No', the pre-boot authentication component will be uninstalled.\n\nNotes:\n\n- If the VeraCrypt Boot Loader did not ask you to enter the password before Windows started, it is possible that your operating system does not boot from the drive on which it is installed. This is not supported.\n\n- If you used an encryption algorithm other than AES and the pretest failed (and you entered the password), it may have been caused by an inappropriately designed driver. Select 'No', and try encrypting the system partition/drive again, but use the AES encryption algorithm (which has the lowest memory requirements).\n\n- For more possible causes and solutions, see: https://www.veracrypt.fr/en/Troubleshooting.html</entry>
<entrylang="ka"key="SYS_DRIVE_NOT_ENCRYPTED">სისტემური განაყოფი/დისკი არ არის დაშიფრული (ნაწილობრივ ან მთლიანად).</entry>
<entrylang="ka"key="SETUP_FAILED_BOOT_DRIVE_ENCRYPTED">სისტემური განაყოფი/დისკი დაშიფრულია (ნაწილობრივ ან მთლიანად).\n\nგაგრძელებამდე გთხოვთ, დეშიფრაცია გაუკეთოთ მთლიანად სისტემურ განაყოფს/დისკს. ამისათვის, აირჩიეთ პროგრამის მენიუში "სისტემა" > "სისტემური განაყოფის/დისკის სამუდამო დეშიფრაცია".</entry>
<entrylang="en"key="SETUP_FAILED_BOOT_DRIVE_ENCRYPTED_DOWNGRADE">When the system partition/drive is encrypted (partially or fully), you cannot downgrade VeraCrypt (but you can upgrade it or reinstall the same version).</entry>
<entrylang="ka"key="SYS_ENCRYPTION_OR_DECRYPTION_IN_PROGRESS">ამჟამად მიმდინარეობს სისტემური განაყოფის/დისკის შიფრაცია, დეშიფრაცია ან სხვა სახის მოდიფიცირება. ვიდრე გააგრძელებთ, გთხოვთ შეწყვიტოთ ეს პროცესი (ან მოიცადოთ მის დასრულებამდე).</entry>
<entrylang="ka"key="SYSTEM_ENCRYPTION_IN_PROGRESS_ELSEWHERE">VeraCrypt ტომის შექმნის ოსტატი უკვე გაშვებულია და ახდენს სისტემური განაყოფის/მოწყობილობის შიფრაცია/დეშიფრაციას. გაგრძელებამდე, გთხოვთ მოიცადოთ მის დასრულებამდე ან დახურეთ იგი. თუ იგი არ იხურება, ვიდრე გააგრძელებთ, გთხოვთ დაარესტარტოთ კომპიუტერი.</entry>
<entrylang="ka"key="SYSTEM_ENCRYPTION_NOT_COMPLETED">სისტემური მოწყობილობის/განაყოფის შიფრაციის ან დეშიფრაციის პროცესი არ დასრულებულა. გთხოვთ მოიცადოთ მის დასრულებამდე.</entry>
<entrylang="ka"key="ERR_ENCRYPTION_NOT_COMPLETED">შეცდომა: განაყოფის/დისკის შიფრაცია არ დასრულებულა. ჯერ ეს პროცესი უნდა დასრულდეს.</entry>
<entrylang="en"key="ERR_NONSYS_INPLACE_ENC_INCOMPLETE">Error: The process of encryption of the partition/volume has not been completed. It must be completed first.\n\nNote: To resume the process, select 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main VeraCrypt window.</entry>
<entrylang="en"key="ERR_SYS_HIDVOL_HEAD_REENC_MODE_WRONG">The password is correct, VeraCrypt has successfully decrypted the volume header and detected that this volume is a hidden system volume. However, you cannot modify the header of a hidden system volume this way.\n\nTo change the password for a hidden system volume, boot the operating system residing in the hidden volume, and then select 'System' > 'Change Password' from the menu bar of the main VeraCrypt window.\n\nTo set the header key derivation algorithm, boot the hidden operating system and then select 'System' > 'Set Header Key Derivation Algorithm'.</entry>
<entrylang="en"key="CANNOT_DECRYPT_HIDDEN_OS">VeraCrypt does not support in-place decryption of a hidden system partition.\n\nNote: If you want to decrypt the decoy system partition, boot the decoy system, and then select 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main VeraCrypt window.</entry>
<entrylang="ka"key="DEVICE_SELECTED_IN_NON_DEVICE_MODE">თქვენ აირჩიეთ განაყოფი ან მოწყობილობა, მაგრამ ოსტატის არჩეული რეჟიმი გამოდგება მხოლოდ ფაილ-კონტეინერებისათვის.\n\nგსურთ შეცვალოთ ოსტატის რეჟიმი?</entry>
<entrylang="ka"key="CONFIRM_CHANGE_WIZARD_MODE_TO_FILE_CONTAINER">გსურთ ამის ნაცვლად შექმნათ VeraCrypt-ის ფაილ-კონტეინერი?</entry>
<entrylang="en"key="CONFIRM_SYSTEM_ENCRYPTION_MODE">You have selected the system partition/drive (or the boot partition), but the wizard mode you selected is suitable only for non-system partitions/drives.\n\nDo you want to set up pre-boot authentication (which means that you will need to enter your password each time before Windows boots/starts) and encrypt the system partition/drive?</entry>
<entrylang="ka"key="CONFIRM_DECRYPT_SYS_DEVICE_CAUTION">გაფრთხილება: თუ სამუდამოდ გაშიფრავთ სისტემურ განაყოფს/დისკს, მასზე ჩაიწერება დაუშიფრავი მონაცემები.\n\nნამდვილად გსურთ სისტემური განაყოფის/დისკის სამუდამო დეშიფრაცია?</entry>
<entrylang="en"key="CONFIRM_DECRYPT_NON_SYS_DEVICE">Are you sure you want to permanently decrypt the following volume?</entry>
<entrylang="en"key="CONFIRM_DECRYPT_NON_SYS_DEVICE_CAUTION">CAUTION: If you permanently decrypt the VeraCrypt volume, unencrypted data will be written to the disk.\n\nAre you really sure you want to permanently decrypt the selected volume?</entry>
<entrylang="en"key="CONFIRM_CASCADE_FOR_SYS_ENCRYPTION">Warning: If you use a cascade of ciphers for system encryption, you may encounter the following issues:\n\n1) The VeraCrypt Boot Loader is larger than normal and, therefore, there is not enough space in the first drive track for a backup of the VeraCrypt Boot Loader. Hence, whenever it gets damaged (which often happens, for example, during inappropriately designed anti-piracy activation procedures of certain programs), you will need to use the VeraCrypt Rescue Disk to boot or to repair the VeraCrypt Boot Loader.\n\n2) On some computers, resuming from hibernation takes longer.\n\nThese potential issues can be prevented by choosing a non-cascade encryption algorithm (e.g. AES).\n\nAre you sure you want to use a cascade of ciphers?</entry>
<entrylang="ka"key="NOTE_CASCADE_FOR_SYS_ENCRYPTION">თუ რომელიმე ზემოთ აღწერილი პრობლემა შეგხვდათ, განაყოფს/დისკს გაუკეთეთ დეშიფრაცია და შემდეგ დაშიფრეტ არაკასკადური შიფრების გამოყენებით (მაგ. AES).</entry>
<entrylang="en"key="UPDATE_TC_IN_DECOY_OS_FIRST">WARNING: For safety and security reasons, you should update VeraCrypt on the decoy operating system before you update it on the hidden operating system.\n\nTo do so, boot the decoy system and run the VeraCrypt installer from within it. Then boot the hidden system and run the installer from within it as well.\n\nNote: The decoy system and the hidden system share a single boot loader. If you upgraded VeraCrypt only on the hidden system (but not on the decoy system), the decoy system would contain a VeraCrypt driver and VeraCrypt applications whose version numbers are different from the version number of the VeraCrypt Boot Loader. Such a discrepancy might indicate that there is a hidden operating system on this computer.\n\n\nDo you want to continue?</entry>
<entrylang="en"key="UPDATE_TC_IN_HIDDEN_OS_TOO">The version number of the VeraCrypt Boot Loader that booted this operating system is different from the version number of the VeraCrypt driver (and of the VeraCrypt applications) installed on this system.\n\nYou should run the VeraCrypt installer (whose version number is the same as the one of the VeraCrypt Boot Loader) to update VeraCrypt on this operating system.</entry>
<entrylang="en"key="BOOT_LOADER_VERSION_DIFFERENT_FROM_DRIVER_VERSION">The version number of the VeraCrypt Boot Loader that booted this operating system is different from the version number of the VeraCrypt driver (and of the VeraCrypt applications) installed on this system. Note that older versions may contain bugs fixed in later versions.\n\nIf you did not boot from the VeraCrypt Rescue Disk, you should reinstall VeraCrypt or upgrade it to the latest stable version (the boot loader will be updated too).\n\nIf you booted from the VeraCrypt Rescue Disk, you should update it ('System' > 'Create Rescue Disk').</entry>
<entrylang="ka"key="BOOT_LOADER_UPGRADE_OK">VeraCrypt ჩამტვირთი მოდული განახლდა.\n\nრეკომენდებულია შექმნათ VeraCrypt-ის ახალი აღმდგენი დისკი (რომელშიც ჩამტვირთი მოდულის ახალი ვერსია იქნება), აირჩიეთ მენიუში "სისტემა">"აღმდგენი დისკის შექმნა" კომპიუტერის რესტარტის შემდეგ.</entry>
<entrylang="en"key="BOOT_LOADER_UPGRADE_OK_HIDDEN_OS">The VeraCrypt Boot Loader has been upgraded.\n\nIt is strongly recommended that you boot the decoy operating system and then create a new VeraCrypt Rescue Disk (which will contain the new version of the VeraCrypt Boot Loader) by selecting 'System' > 'Create Rescue Disk'.</entry>
<entrylang="en"key="SYS_DRIVE_SIZE_PROBE_TIMEOUT">VeraCrypt failed to detect the real size of the system drive and, therefore, the size reported by the operating system (which may be smaller than the real size) will be used. Also note that this is not a bug in VeraCrypt.</entry>
<entrylang="ka"key="HIDDEN_SECTOR_DETECTION_FAILED_PREVIOUSLY">გაფრთხილება: როგორც ჩანს, VeraCrypt-მა უკვე სცადა სისტემურ დისკზე ფარული სექტორების მოძიება. თუ ამ პროცესის დროს პრობლემები შეგექმნათ, მაშინ შეგიძლიათ გამოტოვოთ ძიების პროცესი. VeraCrypt გამოიყენებს ოპერაციული სისტემის მიერ მითითებულ დისკის ზომას (რაც რეალურ ზომაზე ნაკლები შეიძლება იყოს).\n\nეს VeraCrypt-ის რაიმე შეცდომით არ არის გამოწვეული.</entry>
<entrylang="ka"key="SKIP_HIDDEN_SECTOR_DETECTION">გამოტოვეთ ფარული სექტორების ძიება (გამოიყენეთ ოპერაციული სისტემის მიერ მითითებული ზომა)</entry>
<entrylang="en"key="ENABLE_BAD_SECTOR_ZEROING">Error: Content of one or more sectors on the disk cannot be read (probably due to a physical defect).\n\nThe process of in-place encryption can continue only when the sectors have been made readable again. VeraCrypt can attempt to make these sectors readable by writing zeros to the sectors (subsequently such all-zero blocks would be encrypted). However, note that any data stored in the unreadable sectors will be lost. If you want to avoid that, you can attempt to recover portions of the corrupted data using appropriate third-party tools.\n\nNote: In case of physically damaged sectors (as opposed to mere data corruption and checksum errors) most types of storage devices internally reallocate the sectors when data is attempted to be written to them (so the existing data in the damaged sectors may remain unencrypted on the drive).\n\nDo you want VeraCrypt to write zeroes to unreadable sectors?</entry>
<entrylang="en"key="DISCARD_UNREADABLE_ENCRYPTED_SECTORS">Error: Content of one or more sectors on the disk cannot be read (probably due to a physical defect).\n\nTo be able to proceed with decryption, VeraCrypt will have to discard the content of the unreadable sectors (the content will be replaced with pseudorandom data). Please note that, before proceeding, you can attempt to recover portions of any corrupted data using appropriate third-party tools.\n\nDo you want VeraCrypt to discard data in the unreadable sectors now?</entry>
<entrylang="en"key="ZEROED_BAD_SECTOR_COUNT">Note: VeraCrypt has replaced the content of %I64d unreadable sectors (%s) with encrypted all-zero plaintext blocks.</entry>
<entrylang="en"key="SKIPPED_BAD_SECTOR_COUNT">Note: VeraCrypt has replaced the content of %I64d unreadable sectors (%s) with pseudorandom data.</entry>
<entrylang="en"key="ENTER_TOKEN_PASSWORD">Enter password/PIN for token '%s':</entry>
<entrylang="en"key="PKCS11_LIB_LOCATION_HELP">In order to allow VeraCrypt to access a security token or smart card, you need to install a PKCS #11 software library for the token or smart card first. Such a library may be supplied with the device or it may be available for download from the website of the vendor or other third parties.\n\nAfter you install the library, you can either select it manually by clicking 'Select Library' or you can let VeraCrypt find and select it automatically by clicking 'Auto-Detect Library' (only the Windows system directory will be searched).</entry>
<entrylang="en"key="SELECT_PKCS11_MODULE_HELP">Note: For the filename and location of the PKCS #11 library installed for your security token or smart card, please refer to the documentation supplied with the token, card, or third-party software.\n\nClick 'OK' to select the path and filename.</entry>
<entrylang="en"key="NO_PKCS11_MODULE_SPECIFIED">In order to allow VeraCrypt to access a security token or smart card, you need to select a PKCS #11 software library for the token/card first. To do so, select 'Settings' > 'Security Tokens'.</entry>
<entrylang="en"key="PKCS11_MODULE_INIT_FAILED">Failed to initialize PKCS #11 security token library.\n\nPlease make sure the specified path and filename refer to a valid PKCS #11 library. To specify a PKCS #11 library path and filename, select 'Settings' > 'Security Tokens'.</entry>
<entrylang="en"key="PKCS11_MODULE_AUTO_DETECTION_FAILED">No PKCS #11 library has been found in the Windows system directory.\n\nPlease make sure that a PKCS #11 library for your security token (or for your smart card) is installed (such a library may be supplied with the token/card or it may be available for download from the website of the vendor or other third parties). If it is installed in a directory other than the Windows system directory, click 'Select Library' to locate the library (e.g. in the folder where the software for the token/card is installed).</entry>
<entrylang="en"key="NO_TOKENS_FOUND">No security token found.\n\nPlease make sure your security token is connected to your computer and the correct device driver for your token is installed.</entry>
<entrylang="en"key="TOKEN_KEYFILE_NOT_FOUND">Security token keyfile not found.</entry>
<entrylang="en"key="TOKEN_KEYFILE_ALREADY_EXISTS">A security token keyfile with the same name already exists.</entry>
<entrylang="en"key="CONFIRM_SEL_FILES_DELETE">Do you want to delete the selected files?</entry>
<entrylang="en"key="INVALID_TOKEN_KEYFILE_PATH">Security token keyfile path is invalid.</entry>
<entrylang="en"key="CKR_PIN_INCORRECT">Password for security token is incorrect.</entry>
<entrylang="en"key="CKR_DEVICE_MEMORY">The security token does not have enough memory/space to perform the requested operation.\n\nIf you are attempting to import a keyfile, you should select a smaller file or use a keyfile generated by VeraCrypt (select 'Tools' > 'Keyfile Generator').</entry>
<entrylang="en"key="ALL_TOKEN_SESSIONS_CLOSED">All open security token sessions have been closed.</entry>
<entrylang="en"key="BOOT_PASSWORD_CACHE_KEYBOARD_WARNING">IMPORTANT: Please note that pre-boot authentication passwords are always typed using the standard US keyboard layout. Therefore, a volume that uses a password typed using any other keyboard layout may be impossible to mount using a pre-boot authentication password (note that this is not a bug in VeraCrypt). To allow such a volume to be mounted using a pre-boot authentication password, follow these steps:\n\n1) Click 'Select File' or 'Select Device' and select the volume.\n2) Select 'Volumes' > 'Change Volume Password'.\n3) Enter the current password for the volume.\n4) Change the keyboard layout to English (US) by clicking the Language bar icon in the Windows taskbar and selecting 'EN English (United States)'.\n5) In VeraCrypt, in the field for the new password, type the pre-boot authentication password.\n6) Confirm the new password by retyping it in the confirmation field and click 'OK'.\nWARNING: Please keep in mind that if you follow these steps, the volume password will always have to be typed using the US keyboard layout (which is automatically ensured only in the pre-boot environment).</entry>
<entrylang="en"key="SYS_FAVORITES_KEYBOARD_WARNING">System favorite volumes will be mounted using the pre-boot authentication password. If any system favorite volume uses a different password, it will not be mounted.</entry>
<entrylang="en"key="SYS_FAVORITES_ADMIN_ONLY_INFO">Please note that if you need to prevent normal VeraCrypt volume actions (such as 'Dismount All', auto-dismount, etc.) from affecting system favorite volumes, you should enable the option 'Allow only administrators to view and dismount system favorite volumes in VeraCrypt'. In addition, when VeraCrypt is run without administrator privileges (the default on Windows Vista and later), system favorite volumes will not be displayed in the drive letter list in the main VeraCrypt application window.</entry>
<entrylang="en"key="SYS_FAVORITES_ADMIN_ONLY_WARNING">IMPORTANT: Please keep in mind that if this option is enabled and VeraCrypt does not have administrator privileges, mounted system favorite volumes are NOT displayed in the VeraCrypt application window and they cannot be dismounted. Therefore, if you need e.g. to dismount a system favorite volume, please right-click the VeraCrypt icon (in the Start menu) and select 'Run as administrator' first. The same limitation applies to the 'Dismount All' function, 'Auto-Dismount' functions, 'Dismount All' hot keys, etc.</entry>
<entrylang="en"key="SETTING_REQUIRES_REBOOT">Note that this setting takes effect only after the operating system is restarted.</entry>
<entrylang="en"key="COMMAND_LINE_ERROR">Error while parsing command line.</entry>
<entrylang="en"key="SELECT_FILE_AND_MOUNT">Select &File and Mount...</entry>
<entrylang="en"key="SELECT_DEVICE_AND_MOUNT">Select &Device and Mount...</entry>
<entrylang="en"key="DISABLE_NONADMIN_SYS_FAVORITES_ACCESS">Allow only administrators to view and dismount system favorite volumes in VeraCrypt</entry>
<entrylang="en"key="MOUNT_SYSTEM_FAVORITES_ON_BOOT">Mount system favorite volumes when Windows starts (in the initial phase of the startup procedure)</entry>
<entrylang="en"key="MOUNTED_VOLUME_DIRTY">Warning: The filesystem on the volume mounted as '%s' was not cleanly dismounted and thus may contain errors. Using a corrupted filesystem can cause data loss or data corruption.\n\nNote: Before you physically remove or switch off a device (such as a USB flash drive or an external hard drive) where a mounted VeraCrypt volume resides, you should always dismount the VeraCrypt volume in VeraCrypt first.\n\n\nDo you want Windows to attempt to detect and fix errors (if any) on the filesystem?</entry>
<entrylang="en"key="SYS_FAVORITE_VOLUME_DIRTY">Warning: One or more system favorite volumes were not cleanly dismounted and thus may contain filesystem errors. Please see the system event log for further details.\n\nUsing a corrupted filesystem can cause data loss or data corruption. You should check the affected system favorite volume(s) for errors (right-click each of them in VeraCrypt and select 'Repair Filesystem').</entry>
<entrylang="en"key="FILESYS_REPAIR_CONFIRM_BACKUP">Warning: Repairing a damaged filesystem using the Microsoft 'chkdsk' tool might cause loss of files in damaged areas. Therefore, it is recommended that you first back up the files stored on the VeraCrypt volume to another, healthy, VeraCrypt volume.\n\nDo you want to repair the filesystem now?</entry>
<entrylang="en"key="MOUNTED_CONTAINER_FORCED_READ_ONLY">Volume '%s' has been mounted as read-only because write access was denied.\n\nPlease make sure the security permissions of the file container allow you to write to it (right-click the container and select Properties > Security).\n\nNote that, due to a Windows issue, you may see this warning even after setting the appropriate security permissions. This is not caused by a bug in VeraCrypt. A possible solution is to move your container to, e.g., your 'Documents' folder.\n\nIf you intend to keep your volume read-only, set the read-only attribute of the container (right-click the container and select Properties > Read-only), which will suppress this warning.</entry>
<entrylang="en"key="MOUNTED_DEVICE_FORCED_READ_ONLY">Volume '%s' had to be mounted as read-only because write access was denied.\n\nPlease make sure no other application (e.g. antivirus software) is accessing the partition/device on which the volume is hosted.</entry>
<entrylang="en"key="MOUNTED_DEVICE_FORCED_READ_ONLY_WRITE_PROTECTION">Volume '%s' has been mounted as read-only because the operating system reported the host device to be write-protected.\n\nPlease note that some custom chipset drivers have been reported to cause writable media to falsely appear write-protected. This problem is not caused by VeraCrypt. It may be solved by updating or uninstalling any custom (non-Microsoft) chipset drivers that are currently installed on this system.</entry>
<entrylang="en"key="LIMIT_ENC_THREAD_POOL_NOTE">Note that the Hyper-Threading technology provides multiple logical cores per a single physical core. When Hyper Threading is enabled, the number selected above represents the number of logical processors/cores.</entry>
<entrylang="en"key="DISABLED_HW_AES_AFFECTS_PERFORMANCE">Note that hardware-accelerated AES is disabled, which will affect benchmark results (worse performance).\n\nTo enable hardware acceleration, select 'Settings' > 'Performance' and enable the corresponding option.</entry>
<entrylang="en"key="LIMITED_THREAD_COUNT_AFFECTS_PERFORMANCE">Note that the number of threads is currently limited, which will affect benchmark results (worse performance).\n\nTo utilize the full potential of the processor(s), select 'Settings' > 'Performance' and disable the corresponding option.</entry>
<entrylang="en"key="ASK_REMOVE_DEVICE_WRITE_PROTECTION">Do you want VeraCrypt to attempt to disable write protection of the partition/drive?</entry>
<entrylang="en"key="CONFIRM_SETTING_DEGRADES_PERFORMANCE">WARNING: This setting may degrade performance.\n\nAre you sure you want to use this setting?</entry>
<entrylang="en"key="HOST_DEVICE_REMOVAL_DISMOUNT_WARN">Before you physically remove or turn off a device containing a mounted volume, you should always dismount the volume in VeraCrypt first.\n\nUnexpected spontaneous dismount is usually caused by an intermittently failing cable, drive (enclosure), etc.</entry>
<entrylang="en"key="UNSUPPORTED_TRUECRYPT_FORMAT">This volume was created with TrueCrypt %x.%x but VeraCrypt supports only TrueCrypt volumes created with TrueCrypt 6.x/7.x series</entry>
<entrylang="en"key="PASSWORD_UTF8_INVALID">The entered password contains Unicode characters that couldn't be converted to UTF-8 representation.</entry>
<entrylang="en"key="INIT_DLL">Error: Failed to load a system library.</entry>
<entrylang="en"key="ERR_EXFAT_INVALID_VOLUME_SIZE">The volume file size specified in the command line is incompatible with selected exFAT filesystem.</entry>
<entrylang="en"key="IDT_ENTROPY_BAR">Randomness Collected From Mouse Movements</entry>
<entrylang="en"key="IDC_FAVORITE_USE_VOLUME_ID">Use Volume ID to mount favorite</entry>
<entrylang="en"key="VOLUME_ID_INVALID">The Volume ID value is invalid</entry>
<entrylang="en"key="VOLUME_ID_NOT_FOUND">No Volume with the specified ID was found on the system</entry>
<entrylang="en"key="IDPM_COPY_VALUE_TO_CLIPBOARD">Copy Value to Clipboard...</entry>
<entrylang="en"key="IDC_DISABLE_BOOT_LOADER_PIM_PROMPT">Do not request PIM in the pre-boot authentication screen (PIM value is stored unencrypted on disk)</entry>
<entrylang="en"key="DISABLE_BOOT_LOADER_PIM_PROMPT">WARNING: Please keep in mind that if you enable this option, the PIM value will be stored unencrypted on the disk.\n\nAre you sure you want to enable this option?</entry>
<entrylang="en"key="PIM_TOO_BIG">Personal Iterations Multiplier (PIM) maximum value is 2147468.</entry>
<entrylang="en"key="IDC_SKIP_RESCUE_VERIFICATION">Skip Rescue Disk verification</entry>
<entrylang="en"key="IDC_HIDE_WAITING_DIALOG">Don't show wait message dialog when performing operations</entry>
<entrylang="en"key="IDC_DISABLE_BOOT_LOADER_HASH_PROMPT">Do not request Hash algorithm in the pre-boot authentication screen</entry>
<entrylang="en"key="KUZNYECHIK_HELP">Kuznyechik is a block cipher first published in 2015 and defined in the National Standard of the Russian Federation GOST R 34.12-2015 and also in RFC 7801. 256-bit key, 128-bit block. Mode of operation is XTS.</entry>
<entrylang="en"key="CAMELLIA_HELP">Jointly developed by Mitsubishi Electric and NTT of Japan. First published on 2000. 256-bit key, 128-bit block. Mode of operation is XTS. It has been approved for use by the ISO/IEC, the European Union's NESSIE project and the Japanese CRYPTREC project.</entry>
<entrylang="en"key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</entry>
<entrylang="en"key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</entry>
<entrylang="en"key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</entry>
<entrylang="en"key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</entry>
<entrylang="en"key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</entry>
<entrylang="en"key="RESCUE_DISK_EFI_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk image to a USB stick, please eject it and reinsert it; then try again. If this does not help, please try other ZIP software and/or medium.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</entry>
<entrylang="en"key="RESCUE_DISK_EFI_NON_WIZARD_CREATION">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to extract the Rescue Disk image to a USB stick that is formatted as FAT/FAT32.\n\nIMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\nAfter you create the Rescue Disk, select 'System' > 'Verify Rescue Disk' to verify that it has been correctly created.</entry>
<entrylang="en"key="ERR_REFS_INVALID_VOLUME_SIZE">The volume file size specified in the command line is incompatible with selected ReFS filesystem.</entry>
<entrylang="en"key="EDIT_DCSPROP_FOR_ADVANCED_ONLY">WARNING: Inexperienced users should never attempt to manually edit boot loader configurations.\n\nContinue?</entry>
<entrylang="en"key="DCSPROP_XML_VALIDATION_FAILED">WARNING: Failed to validate the XML format of the Boot Loader configuration. Please check your modifications.</entry>
<entrylang="en"key="AFTER_UPGRADE_RESCUE_DISK">It is strongly recommended that you create a new VeraCrypt Rescue Disk (which will contain the new version of the VeraCrypt Boot Loader) by selecting 'System' > 'Create Rescue Disk'.\nDo you want to do it now?</entry>
<entrylang="en"key="IDC_ALLOW_TRIM_NONSYS_SSD">Allow TRIM command for non-system SSD partition/drive</entry>
<entrylang="en"key="IDC_BLOCK_SYSENC_TRIM">Block TRIM command on system partition/drive</entry>
<entrylang="en"key="WINDOWS_EFI_BOOT_LOADER_MISSING">ERROR: Windows EFI system loader could not be located on the disk. Operation will be aborted.</entry>
<entrylang="en"key="SYSENC_EFI_UNSUPPORTED_SECUREBOOT">It is currently not possible to encrypt a system if SecureBoot is enabled and if VeraCrypt custom keys are not loaded into the machine firmware. SecureBoot needs to be disabled in the BIOS configuration in order to allow system encryption to proceed.</entry>
<entrylang="en"key="PASSWORD_PASTED_TRUNCATED">Pasted text truncated because the password maximum length is %d characters</entry>
<entrylang="en"key="PASSWORD_MAXLENGTH_REACHED">Password already reached its maximum length of %d characters.\nNo additional character is allowed.</entry>
<entrylang="en"key="CONFIRM_ALLOW_WINDOWS_DEFRAG">WARNING: Defragmenting non-system partitions/drives may leak metadata about their content or cause issues with hidden volumes they may contain.\n\nContinue?</entry>
<entrylang="en"key="MOUNTED_VOLUME_NOT_ASSOCIATED">The selected mounted volume is not associated with its drive letter in Windows and so it can not be opened in Windows Explorer.</entry>
<entrylang="en"key="IDC_CLEAR_KEYS_ON_NEW_DEVICE_INSERTION">Clear encryption keys from memory if a new device is inserted</entry>
<entrylang="en"key="CLEAR_KEYS_ON_DEVICE_INSERTION_WARNING">IMPORTANT NOTES:\n - Please keep in mind that this option will not persist after a shutdown/reboot so you will need to select it again next time the machine is started.\n\n - With this option enabled and after a new device is connected, the machine will freeze and it will eventually crash with a BSOD since Windows can not access the encrypted disk after its keys are cleared from memory.\n</entry>
<entrylang="en"key="RAM_ENCRYPTION_DISABLE_HIBERNATE">WARNING: RAM encryption is not compatible with Windows Hibernate and Windows Fast Startup features. VeraCrypt needs to disable them before activating RAM encryption.\n\nContinue?</entry>
<entrylang="en"key="CONFIRM_DISABLE_FAST_STARTUP">WARNING: Windows Fast Startup is enabled and it is known to cause issues when working with VeraCrypt volumes. It is advised to disable it for better security and usability.\n\nDo you want to disable Windows Fast Startup?</entry>
<entrylang="en"key="QUICK_FORMAT_HELP">In order to enable your operating system to mount your new volume, it has to be formatted with a filesystem. Please select a filesystem type.\n\nIf your volume is going to be hosted on a device or partition, you can use 'Quick format' to skip encryption of free space of the volume.</entry>
<entrylang="en"key="IDC_ENABLE_HARDWARE_ENCRYPTION_NEG">Do not accelerate AES encryption/decryption by using the AES instructions of the processor</entry>
<entrylang="en"key="IDM_ADD_ALL_VOLUME_TO_FAVORITES">Add All Mounted Volumes to Favorites...</entry>
<entrylang="en"key="TASKICON_PREF_MENU_ITEMS">Task Icon Menu Items</entry>
<entrylang="en"key="DISK_FREE">Free space available: {0}</entry>
<entrylang="en"key="VOLUME_SIZE_HELP">Please specify the size of the container to create. Note that the minimum possible size of a volume is 292 KiB.</entry>
<entrylang="en"key="LINUX_CONFIRM_INNER_VOLUME_CALC">WARNING: You have selected a filesystem other than FAT for the outer volume.\nPlease Note that in this case VeraCrypt can't calculate the exact maximum allowed size for the hidden volume and it will use only an estimation that can be wrong.\nThus, it is your responsibility to use an adequate value for the size of the hidden volume so that it does not overlap the outer volume.\n\nDo you want to continue using the selected filesystem for the outer volume?</entry>
<entrylang="en"key="LINUX_OPEN_FINDER">Open Finder window for successfully mounted volume</entry>
<entrylang="en"key="LINUX_DISABLE_KERNEL_ONLY_SETTING">Please note that this setting takes effect only if use of the kernel cryptographic services is disabled.</entry>
<entrylang="en"key="LINUX_DISABLE_KERNEL_CRYPT_CONFIRM">Disabling the use of kernel cryptographic services can degrade performance.\n\nAre you sure?</entry>
<entrylang="en"key="LINUX_KERNEL_CRYPT_OPTION_CHANGE_MOUNTED_HINT">Please note that disabling this option may have no effect on volumes mounted using kernel cryptographic services.</entry>
<entrylang="en"key="LINUX_REMOUNT_BECAUSEOF_SETTING">Please note that any currently mounted volumes need to be remounted before they can use this setting.</entry>
<entrylang="en"key="LINUX_FIRST_AID">"Disk Utility will be launched after you press 'OK'.\n\nPlease select your volume in the Disk Utility window and press 'Verify Disk' or 'Repair Disk' button on the 'First Aid' page.</entry>
<entrylang="en"key="LINUX_MOUNT_ALL_DEV">Mount All Devices</entry>
<entrylang="en"key="LINUX_ERROR_LOADING_CONFIG">Error while loading configuration files located in </entry>
<entrylang="en"key="LINUX_SELECT_FREE_SLOT">Please select a free drive slot from the list.</entry>
<entrylang="en"key="LINUX_MESSAGE_ON_MOUNT_AGAIN">\n\nDo you want to show this message next time you mount such a volume?</entry>
<entrylang="en"key="LINUX_ONLY_TEXTMODE">This feature is currently supported only in text mode.</entry>
<entrylang="en"key="LINUX_FREE_SPACE_ON_DRIVE">Free space on drive {0}: is {1}.</entry>
<entrylang="en"key="LINUX_DYNAMIC_NOTICE">Please note that if your operating system does not allocate files from the beginning of the free space, the maximum possible hidden volume size may be much smaller than the size of the free space on the outer volume. This is not a bug in VeraCrypt but a limitation of the operating system.</entry>
<entrylang="en"key="LINUX_MAX_HIDDEN_SIZE">Maximum possible hidden volume size for this volume is {0}.</entry>
<entrylang="en"key="LINUX_OUTER_VOL_IS_MOUNTED">Outer volume has been successfully created and mounted as '{0}'. To this volume you should now copy some sensitive-looking files that you actually do NOT want to hide. The files will be there for anyone forcing you to disclose your password. You will reveal only the password for this outer volume, not for the hidden one. The files that you really care about will be stored in the hidden volume, which will be created later on. When you finish copying, click Next. Do not dismount the volume.\n\nNote: After you click Next, the outer volume will be analyzed to determine the size of uninterrupted area of free space whose end is aligned with the end of the volume. This area will accommodate the hidden volume, so it will limit its maximum possible size. The procedure ensures no data on the outer volume are overwritten by the hidden volume.</entry>
<entrylang="en"key="LINUX_ERROR_TRY_ENCRYPT_SYSTEM_DRIVE">Error: You are trying to encrypt a system drive.\n\nVeraCrypt can encrypt a system drive only under Windows.</entry>
<entrylang="en"key="LINUX_ERROR_TRY_ENCRYPT_SYSTEM_PARTITION">Error: You are trying to encrypt a system partition.\n\nVeraCrypt can encrypt system partitions only under Windows.</entry>
<entrylang="en"key="LINUX_WARNING_FORMAT_DESTROY_FS">WARNING: Formatting of the device will destroy all data on filesystem '{0}'.\n\nDo you want to continue?</entry>
<entrylang="en"key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please dismount '{0}' before proceeding.</entry>
<entrylang="en"key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
<entrylang="en"key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
<entrylang="en"key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
<entrylang="en"key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
<entrylang="en"key="LINUX_DOT_LF">.\n</entry>
<entrylang="en"key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
<entrylang="en"key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
<entrylang="en"key="LINUX_VOL_DISMOUNTED">Volume {0} has been dismounted.</entry>
<entrylang="en"key="LINUX_CMD_HELP">VeraCrypt Command Line Help</entry>
<entrylang="en"key="LINUX_HIDDEN_FILES_PRESENT_IN_KEYFILE_PATH">\n\nWarning: Hidden files are present in a keyfile path. If you need to use them as keyfiles, remove the leading dot from their filenames. Hidden files are visible only if enabled in system options.</entry>
<entrylang="en"key="LINUX_EX2MSG_DEVICESECTORSIZEMISMATCH">Storage device and VC volume sector size mismatch</entry>
<entrylang="en"key="LINUX_EX2MSG_ENCRYPTEDSYSTEMREQUIRED">This operation must be performed only when the system hosted on the volume is running.</entry>
<entrylang="en"key="LINUX_EX2MSG_INSUFFICIENTDATA">Not enough data available.</entry>
<entrylang="en"key="LINUX_EX2MSG_KERNELCRYPTOSERVICETESTFAILED">Kernel cryptographic service test failed. The cryptographic service of your kernel most likely does not support volumes larger than 2 TB.\n\nPossible solutions:\n- Upgrade the Linux kernel to version 2.6.33 or later.\n- Disable use of the kernel cryptographic services (Settings > Preferences > System Integration) or use 'nokernelcrypto' mount option on the command line.</entry>
<entrylang="en"key="LINUX_EX2MSG_LOOPDEVICESETUPFAILED">Failed to set up a loop device.</entry>
<entrylang="en"key="LINUX_EX2MSG_MISSINGARGUMENT">A required argument is missing.</entry>
<entrylang="en"key="LINUX_EX2MSG_MISSINGVOLUMEDATA">Volume data missing.</entry>
<entrylang="en"key="LINUX_EX2MSG_MOUNTPOINTREQUIRED">Mount point required.</entry>
<entrylang="en"key="LINUX_EX2MSG_MOUNTPOINTUNAVAILABLE">Mount point is already in use.</entry>
<entrylang="en"key="LINUX_EX2MSG_PASSWORDEMPTY">No password or keyfile specified.</entry>
<entrylang="en"key="LINUX_EX2MSG_PASSWORDORKEYBOARDLAYOUTINCORRECT">\n\nNote that pre-boot authentication passwords need to be typed in the pre-boot environment where non-US keyboard layouts are not available. Therefore, pre-boot authentication passwords must always be typed using the standard US keyboard layout (otherwise, the password will be typed incorrectly in most cases). However, note that you do NOT need a real US keyboard; you just need to change the keyboard layout in your operating system.</entry>
<entrylang="en"key="LINUX_EX2MSG_PASSWORDORMOUNTOPTIONSINCORRECT">\n\nNote: If you are attempting to mount a partition located on an encrypted system drive without pre-boot authentication or to mount the encrypted system partition of an operating system that is not running, you can do so by selecting 'Options >' > 'Mount partition using system encryption'.</entry>
<entrylang="en"key="LINUX_EX2MSG_PASSWORDTOOLONG">Password is longer than {0} characters.</entry>
<entrylang="en"key="LINUX_EX2MSG_PROTECTIONPASSWORDINCORRECT">Incorrect password to the protected hidden volume or the hidden volume does not exist.</entry>
<entrylang="en"key="LINUX_EX2MSG_PROTECTIONPASSWORDKEYFILESINCORRECT">Incorrect keyfile(s) and/or password to the protected hidden volume or the hidden volume does not exist.</entry>
<entrylang="en"key="LINUX_EX2MSG_STRINGFORMATTEREXCEPTION">Error while parsing formatted string.</entry>
<entrylang="en"key="LINUX_EX2MSG_TEMPORARYDIRECTORYFAILURE">Failed to create a file or directory in a temporary directory.\n\nPlease make sure that the temporary directory exists, its security permissions allow you to access it, and there is sufficient disk space.</entry>
<entrylang="en"key="LINUX_EX2MSG_UNSUPPORTEDSECTORSIZEHIDDENVOLUMEPROTECTION">Error: The drive uses a sector size other than 512 bytes.\n\nDue to limitations of components available on your platform, outer volumes hosted on the drive cannot be mounted using hidden volume protection.\n\nPossible solutions:\n- Use a drive with 512-byte sectors.\n- Create a file-hosted volume (container) on the drive.\n- Backup the contents of the hidden volume and then update the outer volume.</entry>
<entrylang="en"key="LINUX_EX2MSG_UNSUPPORTEDSECTORSIZENOKERNELCRYPTO">Error: The drive uses a sector size other than 512 bytes.\n\nDue to limitations of components available on your platform, partition/device-hosted volumes on the drive can only be mounted using kernel cryptographic services.\n\nPossible solutions:\n- Enable use of the kernel cryptographic services (Preferences > System Integration).\n- Use a drive with 512-byte sectors.\n- Create a file-hosted volume (container) on the drive.</entry>
<entrylang="en"key="LINUX_EX2MSG_UNSUPPORTEDSECTORSIZE">Error: The drive uses a sector size other than 512 bytes.\n\nDue to limitations of components available on your platform, partition/device-hosted volumes cannot be created/used on the drive.\n\nPossible solutions:\n- Create a file-hosted volume (container) on the drive.\n- Use a drive with 512-byte sectors.\n- Use VeraCrypt on another platform.</entry>
<entrylang="en"key="LINUX_EX2MSG_VOLUMEHOSTINUSE">The host file/device is already in use.</entry>
<entrylang="en"key="VOLUME_HOST_IN_USE">WARNING: The host file/device {0} is already in use!\n\nIgnoring this can cause undesired results including system instability. All applications that might be using the host file/device should be closed before mounting the volume.\n\nContinue mounting?</entry>
<entrylang="en"key="CANT_INSTALL_WITH_EXE_OVER_MSI">VeraCrypt was previously installed using an MSI package and so it can't be updated using the standard installer.\n\nPlease use the MSI package to update your VeraCrypt installation.</entry>
<entrylang="en"key="SYS_ENCRYPTION_UPGRADE_UNSUPPORTED_ALGORITHM">VeraCrypt cannot be upgraded because the system partition/drive was encrypted using an algorithm that is not supported anymore.\nPlease decrypt your system before upgrading VeraCrypt and then encrypt it again.</entry>
<entrylang="en"key="LINUX_EX2MSG_TERMINALNOTFOUND">Supported terminal application could not be found, you need either xterm, konsole or gnome-terminal (with dbus-x11).</entry>
<entrylang="en"key="EXPANDER_INFO">:: VeraCrypt Expander ::\n\nExpand a VeraCrypt volume on the fly without reformatting\n\n\nAll kind of volumes (container files, disks and partitions) formatted with NTFS are supported. The only condition is that there must be enough free space on the host drive or host device of the VeraCrypt volume.\n\nDo not use this software to expand an outer volume containing a hidden volume, because this destroys the hidden volume!\n</entry>
<entrylang="en"key="IDC_STEPSEXPAND">1. Select the VeraCrypt volume to be expanded\n2. Click the 'Mount' button</entry>
<entrylang="en"key="IDT_INIT_SPACE">Fill new space: </entry>
<entrylang="en"key="EXPANDER_FREE_SPACE">%s free space available on host drive</entry>
<entrylang="en"key="EXPANDER_HELP_DEVICE">This is a device-based VeraCrypt volume.\n\nThe new volume size will be choosen automatically as the size of the host device.</entry>
<entrylang="en"key="EXPANDER_HELP_FILE">Please specify the new size of the VeraCrypt volume (must be at least %I64u KB larger than the current size).</entry>
<entrylang="en"key="QUICK_EXPAND_WARNING">WARNING: You should use Quick Expand only in the following cases:\n\n1) The device where the file container is located contains no sensitive data and you do not need plausible deniability.\n2) The device where the file container is located has already been securely and fully encrypted.\n\nAre you sure you want to use Quick Expand?</entry>
<entrylang="en"key="EXPANDER_STATUS_TEXT">IMPORTANT: Move your mouse as randomly as possible within this window. The longer you move it, the better. This significantly increases the cryptographic strength of the encryption keys. Then click 'Continue' to expand the volume.</entry>
<entrylang="en"key="EXPANDER_STATUS_TEXT_LEGACY">Click 'Continue' to expand the volume.</entry>
<entrylang="en"key="EXPANDER_CANCEL_WARNING">Warning: Volume expansion is in progress!\n\nStopping now may result in a damaged volume.\n\nDo you really want to cancel?</entry>
<entrylang="en"key="EXPANDER_HIDDEN_VOLUME_ERROR">An outer volume containing a hidden volume can't be expanded, because this destroys the hidden volume.\n</entry>
<entrylang="en"key="EXPANDER_SYSTEM_VOLUME_ERROR">A VeraCrypt system volume can't be expanded.</entry>
<entrylang="en"key="EXPANDER_NO_FREE_SPACE">Not enough free space to expand the volume</entry>
<entrylang="en"key="EXPANDER_WARNING_FILE_CONTAINER_JUNK">Warning: The container file is larger than the VeraCrypt volume area. The data after the VeraCrypt volume area will be overwritten.\n\nDo you want to continue?</entry>
<entrylang="en"key="EXPANDER_WARNING_FAT">Warning: The VeraCrypt volume contains a FAT file system!\n\nOnly the VeraCrypt volume itself will be expanded, but not the file system.\n\nDo you want to continue?</entry>
<entrylang="en"key="EXPANDER_WARNING_EXFAT">Warning: The VeraCrypt volume contains an exFAT file system!\n\nOnly the VeraCrypt volume itself will be expanded, but not the file system.\n\nDo you want to continue?</entry>
<entrylang="en"key="EXPANDER_WARNING_UNKNOWN_FS">Warning: The VeraCrypt volume contains an unknown or no file system!\n\nOnly the VeraCrypt volume itself will be expanded, the file system remains unchanged.\n\nDo you want to continue?</entry>
<entrylang="en"key="EXPANDER_ERROR_VOLUME_SIZE_TOO_SMALL">New volume size too small, must be at least %I64u kB larger than the current size.</entry>
<entrylang="en"key="EXPANDER_ERROR_VOLUME_SIZE_TOO_LARGE">New volume size too large, not enough space on host drive.</entry>
<entrylang="en"key="EXPANDER_ERROR_MAX_FILE_SIZE_EXCEEDED">Maximum file size of %I64u MB on host drive exceeded.</entry>
<entrylang="en"key="EXPANDER_ERROR_QUICKEXPAND_PRIVILEGES">Error: Failed to get necessary privileges to enable Quick Expand!\nPlease uncheck Quick Expand option and try again.</entry>
<entrylang="en"key="EXPANDER_ERROR_MAX_VC_VOLUME_SIZE_EXCEEDED">Maximum VeraCrypt volume size of %I64u TB exceeded!\n</entry>
<entrylang="en"key="WARN_FAST_CREATE">WARNING: You should use Fast Create only in the following cases:\n\n1) The device contains no sensitive data and you do not need plausible deniability.\n2) The device has already been securely and fully encrypted.\n\nAre you sure you want to use Fast Create?</entry>
<entrylang="en"key="COMMAND_APDU_INVALID">The APDU command sent to the card is not valid.</entry>
<entrylang="en"key="EXTENDED_APDU_UNSUPPORTED">Extended APDU commands cannot be used with the current token.</entry>
<entrylang="en"key="SCARD_MODULE_INIT_FAILED">Error when loading the WinSCard / PCSC library.</entry>
<entrylang="en"key="EMV_UNKNOWN_CARD_TYPE">The card in the reader is not a supported EMV card.</entry>
<entrylang="en"key="EMV_SELECT_AID_FAILED">The AID of the card in the reader could not be selected.</entry>
<entrylang="en"key="EMV_ICC_CERT_NOTFOUND">ICC Public Key Certificate was not found in the card.</entry>
<entrylang="en"key="EMV_ISSUER_CERT_NOTFOUND">Issuer Public Key Certificate was not found in the card.</entry>
<entrylang="en"key="EMV_CPLC_NOTFOUND">CLPC was not found in the EMV card.</entry>
<entrylang="en"key="EMV_PAN_NOTFOUND">No Primary Account Number (PAN) found in the EMV card.</entry>
<entrylang="en"key="INVALID_EMV_PATH">EMV path is invalid.</entry>
<entrylang="en"key="EMV_KEYFILE_DATA_NOTFOUND">Unable to build a keyfile from the EMV card's data.\n\nOne of the following is missing:\n- ICC Public Key Certificate.\n- Issuer Public Key Certificate.\n- CPCL data.</entry>
<entrylang="en"key="SCARD_W_REMOVED_CARD">No card in the reader.\n\nPlease make sure the card is correctly slotted.</entry>
<entrylang="en"key="FORMAT_EXTERNAL_FAILED">Windows format.com command failed to format the volume as NTFS/exFAT/ReFS: Error 0x%.8X.\n\nFalling back to using Windows FormatEx API.</entry>
<entrylang="en"key="FORMATEX_API_FAILED">Windows FormatEx API failed to format the volume as NTFS/exFAT/ReFS.\n\nFailure status = %s.</entry>
